Index: /issm/trunk-jpl/examples/PigSensitivity/runme.m
===================================================================
--- /issm/trunk-jpl/examples/PigSensitivity/runme.m	(revision 25982)
+++ /issm/trunk-jpl/examples/PigSensitivity/runme.m	(revision 25983)
@@ -1,6 +1,3 @@
-steps=[1:4];
-
-try
-
+steps=[1];
 
 if any(steps==1) %Transient Run #1 %{{{
@@ -25,4 +22,15 @@
 	md=solve(md,'Transient');
 
+	plotmodel(md, 'data', md.results.TransientSolution(1).Vel,...
+		'title#1', 'Velocity t=0 years (m/yr)',...
+		'data', md.results.TransientSolution(end).Vel,...
+		'title#2', 'Velocity t=10 years (m/yr)',...
+		'data', md.results.TransientSolution(1).MaskOceanLevelset,...
+		'title#3', 'Floating ice t=0 years',...
+		'data', md.results.TransientSolution(end).MaskOceanLevelset,...
+		'title#4', 'Floating ice t=10 years',...
+		'caxis#1',([0 4500]),'caxis#2',([0 4500]),...
+		'caxis#3',([-1,1]),'caxis#4',([-1,1]));
+
 	% Save model
 	save ./Models/PIG_Transient md;
@@ -40,4 +48,15 @@
 
 	md=solve(md,'Transient');
+
+	plotmodel(md, 'data', md.results.TransientSolution(1).Vel,...
+		'title#1', 'Velocity t=0 years (m/yr)',...
+		'data', md.results.TransientSolution(end).Vel,...
+		'title#2', 'Velocity t=10 years (m/yr)',...
+		'data', md.results.TransientSolution(1).MaskOceanLevelset,...
+		'title#3', 'Floating ice t=0 years',...
+		'data', md.results.TransientSolution(end).MaskOceanLevelset,...
+		'title#4', 'Floating ice t=10 years',...
+		'caxis#1',([0 4500]),'caxis#2',([0 4500]),...
+		'caxis#3',([-1,1]),'caxis#4',([-1,1]));
 
 	save ./Models/PIG_HighMelt md;
@@ -60,9 +79,20 @@
 	md2=solve(md2,'Transient');
 
+	plotmodel(md, 'data', md.results.TransientSolution(1).Vel,...
+		'title#1', 'Velocity t=0 years (m/yr)',...
+		'data', md.results.TransientSolution(end).Vel,...
+		'title#2', 'Velocity t=10 years (m/yr)',...
+		'data', md.results.TransientSolution(1).MaskOceanLevelset,...
+		'title#3', 'Floating ice t=0 years',...
+		'data', md.results.TransientSolution(end).MaskOceanLevelset,...
+		'title#4', 'Floating ice t=10 years',...
+		'caxis#1',([0 4500]),'caxis#2',([0 4500]),...
+		'caxis#3',([-1,1]),'caxis#4',([-1,1]));
+
 	save ./Models/PIG_FrontRetreat md2;
 end %}}}
 
-if any(steps==4)
- disp('Needs work!') %High surface mass balance #3 %{{{
+if any(steps==4) %High surface mass balance #3 %{{{
+
 	%Load model
 
@@ -77,3 +107,3 @@
 	%Save model
 
-end %}}}
+end %}}} % step 4 end
Index: /issm/trunk-jpl/jenkins/examples_tests.sh
===================================================================
--- /issm/trunk-jpl/jenkins/examples_tests.sh	(revision 25982)
+++ /issm/trunk-jpl/jenkins/examples_tests.sh	(revision 25983)
@@ -47,5 +47,5 @@
 
 		if [ "${dir}" == "./AMR" ]; then
-			sed -i.bak '1 s|^.*$|try\n\n&|' $RUNME_FILE
+			sed -i.bak -e '1 s|^.*$|try\n\n&|' $RUNME_FILE
 			RUN_EXAMPLE=1
 		elif [ "${dir}" == "./Data" ]; then
@@ -53,8 +53,8 @@
 			RUN_EXAMPLE=0
 		elif [ "${dir}" == "./EsaGRACE" ]; then
-			sed -i.bak 's|steps=\[1\];|steps=\[1:5\];\n\ntry\n|' $RUNME_FILE
+			sed -i.bak -e 's|steps=\[1\];|steps=\[1:5\];\n\ntry\n|' $RUNME_FILE
 			RUN_EXAMPLE=1
 		elif [ "${dir}" == "./EsaWahr" ]; then
-			sed -i.bak 's|steps=\[1\];|steps=\[1:7\];\n\ntry\n|' $RUNME_FILE
+			sed -i.bak -e 's|steps=\[1\];|steps=\[1:7\];\n\ntry\n|' $RUNME_FILE
 			RUN_EXAMPLE=1
 		elif [ "${dir}" == "./Functions" ]; then
@@ -151,17 +151,17 @@
 			"
 			#}}}
-			sed -i.bak 's|steps=\[1\];|steps=\[1:8\];\n\ntry\n|' $RUNME_FILE
+			sed -i.bak -e 's|steps=\[1\];|steps=\[1:8\];\n\ntry\n|' $RUNME_FILE
 			perl -0755 -p -i -e "s|if any\(steps==7\).*% step 7 end|${STEP_SEVEN}|s" $RUNME_FILE
 			perl -0755 -p -i -e "s|if any\(steps==8\).*% step 8 end|${STEP_EIGHT}|s" $RUNME_FILE
 			RUN_EXAMPLE=1
 		elif [ "${dir}" == "./IceBridge" ]; then
-			sed -i.bak 's|steps=\[1\];|steps=\[1:5\];\n\ntry\n|' $RUNME_FILE
+			sed -i.bak -e 's|steps=\[1\];|steps=\[1:5\];\n\ntry\n|' $RUNME_FILE
 			perl -0755 -p -i -e "s|\n\t%Mesh greenland without.*return;\n||s" $RUNME_FILE
 			RUN_EXAMPLE=1
 		elif [ "${dir}" == "./IceflowModels" ]; then
-			sed -i.bak '1 s|^.*$|try\n\n&|' $RUNME_FILE
+			sed -i.bak -e '1 s|^.*$|try\n\n&|' $RUNME_FILE
 			RUN_EXAMPLE=1
 		elif [ "${dir}" == "./Inversion" ]; then
-			sed -i.bak 's|steps=\[1\];|steps=\[1:4\];\n\ntry\n|' $RUNME_FILE
+			sed -i.bak -e 's|steps=\[1\];|steps=\[1:4\];\n\ntry\n|' $RUNME_FILE
 			RUN_EXAMPLE=1
 		elif [ "${dir}" == "./ISMIP" ]; then
@@ -526,12 +526,12 @@
 			RUN_EXAMPLE=1
 		elif [ "${dir}" == "./Jakobshavn" ]; then
-			sed -i.bak 's|steps=\[1\];|steps=\[1:4\];\n\ntry\n|' $RUNME_FILE
+			sed -i.bak -e 's|steps=\[1\];|steps=\[1:4\];\n\ntry\n|' $RUNME_FILE
 			RUN_EXAMPLE=1
 		elif [ "${dir}" == "./LcurveAnalysis" ]; then
-			sed -i.bak 's|steps=\[1\];|steps=\[1:4\];\n\ntry\n|' $RUNME_FILE
+			sed -i.bak -e 's|steps=\[1\];|steps=\[1:4\];\n\ntry\n|' $RUNME_FILE
 			RUN_EXAMPLE=1
 		elif [ "${dir}" == "./Mesh" ]; then
 			# NOTE: Cannot test exptool region selection without GUI
-			sed -i.bak 's|steps=\[1\];|steps=\[1:7\];\n\ntry\n|' $RUNME_FILE
+			sed -i.bak -e 's|steps=\[1\];|steps=\[1:7\];\n\ntry\n|' $RUNME_FILE
 			RUN_EXAMPLE=1
 		elif [ "${dir}" == "./Pig" ]; then
@@ -558,10 +558,10 @@
 			#}}}
 			mv ./DomainOutline.bkp ./DomainOutline.exp > /dev/null 2>&1
-			sed -i.bak "s|steps=\[1\];|steps=\[1:7\];\ntry\n|" $RUNME_FILE
+			sed -i.bak -e 's|steps=\[1\];|steps=\[1:7\];\ntry\n|' $RUNME_FILE
 			perl -0755 -p -i -e "s|if any\(steps==6\).*% step 6 end|${STEP_SIX}|s" $RUNME_FILE
 			RUN_EXAMPLE=1
 		elif [ "${dir}" == "./Pig2" ]; then
 			STEP_NINE="\n disp('Needs work!'); exit"
-			sed -i.bak 's|steps=\[1\];|steps=\[1:9\];\n\ntry\n|' $RUNME_FILE
+			sed -i.bak -e 's|steps=\[1\];|steps=\[1:9\];\n\ntry\n|' $RUNME_FILE
 			perl -0755 -p -i -e "s|if any\(steps==9\).*% step 9 end|${STEP_NINE}|s" $RUNME_FILE
 			RUN_EXAMPLE=1
@@ -588,4 +588,16 @@
 					md=solve(md,'Transient');\n\
 					\n\
+					%Plot\n\
+					plotmodel(md, 'data', md.results.TransientSolution(1).Vel,...\n\
+						'title#1', 'Velocity t=0 years (m/yr)',...\n\
+						'data', md.results.TransientSolution(end).Vel,...\n\
+						'title#2', 'Velocity t=10 years (m/yr)',...\n\
+						'data', md.results.TransientSolution(1).MaskOceanLevelset,...\n\
+						'title#3', 'Floating ice t=0 years',...\n\
+						'data', md.results.TransientSolution(end).MaskOceanLevelset,...\n\
+						'title#4', 'Floating ice t=10 years',...\n\
+						'caxis#1',([0 4500]),'caxis#2',([0 4500]),...\n\
+						'caxis#3',([-1,1]),'caxis#4',([-1,1]));\n\
+					\n\
 					%Save model\n\
 					save ./Models/PIG_SMB md;\n\
@@ -593,27 +605,27 @@
 			"
 			#}}}
-			sed -i.bak 's|steps=\[1\];|steps=\[1:4\];\n\ntry\n|' $RUNME_FILE
-			sed -i '' "s|if any(steps==4)|&${STEP_FOUR}|" $RUNME_FILE
+			sed -i.bak -e 's|steps=\[1\];|steps=\[1:4\];\n\ntry\n|' $RUNME_FILE
+			perl -0755 -p -i -e "s|if any\(steps==4\).*% step 4 end|${STEP_FOUR}|s" $RUNME_FILE
 			RUN_EXAMPLE=1
 		elif [ "${dir}" == "./shakti" ]; then
-			sed -i.bak 's|steps=\[1:3\];|steps=\[1:3\];\n\ntry\n|' $RUNME_FILE
+			sed -i.bak -e 's|steps=\[1:3\];|steps=\[1:3\];\n\ntry\n|' $RUNME_FILE
 			RUN_EXAMPLE=1
 		elif [ "${dir}" == "./SlrFarrell" ]; then
 			# TODO: Convert from md.slr
-			sed -i.bak 's|steps=\[1\];|steps=\[1:5\];\n\ntry\n|' $RUNME_FILE
+			sed -i.bak -e 's|steps=\[1\];|steps=\[1:5\];\n\ntry\n|' $RUNME_FILE
 			RUN_EXAMPLE=0
 		elif [ "${dir}" == "./SlrGRACE" ]; then
 			# TODO: Convert from md.slr
-			sed -i.bak 's|steps=\[1\];|steps=\[1:7\];\n\ntry\n|' $RUNME_FILE
+			sed -i.bak -e 's|steps=\[1\];|steps=\[1:7\];\n\ntry\n|' $RUNME_FILE
 			RUN_EXAMPLE=0
 		elif [ "${dir}" == "./SlrGRACE_NIMS" ]; then
 			# TODO: Convert from md.slr
-			sed -i.bak 's|steps=\[1\];|steps=\[1:8\];\n\ntry\n|' $RUNME_FILE
+			sed -i.bak -e 's|steps=\[1\];|steps=\[1:8\];\n\ntry\n|' $RUNME_FILE
 			RUN_EXAMPLE=0
 		elif [ "${dir}" == "./SquareIceShelf" ]; then
-			sed -i.bak '1 s|^.*$|try\n\n&|' $RUNME_FILE
+			sed -i.bak -e '1 s|^.*$|try\n\n&|' $RUNME_FILE
 			RUN_EXAMPLE=1
 		elif [ "${dir}" == "./UncertaintyQuantification" ]; then
-			sed -i.bak 's|steps=\[1\];|steps=\[1:7\];\n\ntry\n|' $RUNME_FILE
+			sed -i.bak -e 's|steps=\[1\];|steps=\[1:7\];\n\ntry\n|' $RUNME_FILE
 			RUN_EXAMPLE=1
 		else
Index: /issm/trunk-jpl/jenkins/ross-debian_linux-full
===================================================================
--- /issm/trunk-jpl/jenkins/ross-debian_linux-full	(revision 25982)
+++ /issm/trunk-jpl/jenkins/ross-debian_linux-full	(revision 25983)
@@ -44,5 +44,5 @@
 	petsc		install-3.12-linux.sh
 	gsl			install.sh
-	boost		install-1.7-linux-valgrind.sh
+	boost		install-1.7-linux.sh
 	dakota		install-6.2-linux.sh
 	curl		install-7-linux.sh