source: issm/trunk/test/NightlyRun/test1302.m@ 8304

% This file can be run to check that the advection-diffusion  is correctly modeled.
% There is u=v=0 and w=cst everywhere the only thermal boundary conditions are an imposed temperature
% at upper surface and an impose flux at its base.
printingflag=false;

md=model;
md=mesh(md,'../Exp/Square.exp',100000);
md=geography(md,'','');
md=parameterize(md,'../Par/SquareThermal.par');
md=extrude(md,30,1);   %NB: the more one extrudes, the better (10-> relative~0.35%, 20->0.1%, 30->0.05%)
md=setelementstype(md,'Pattyn','all'); 

%Thermal boundary conditions
pos1=find(md.elementonbed);     md.spctemperature(md.elements(pos1,1:3),1)=1; md.spctemperature(md.elements(pos1,1:3),2)=10;
pos2=find(md.elementonsurface); md.spctemperature(md.elements(pos2,4:6),1)=1; md.spctemperature(md.elements(pos2,4:6),2)=0;
md.vz=0.1*ones(md.numberofnodes,1);
md.vel=sqrt( md.vx.^2+ md.vy.^2+ md.vz.^2);
md.pressure=zeros(md.numberofnodes,1);

%analytical results
%d2T/dz2-w*rho_ice*c/k*dT/dz=0   T(surface)=0  T(bed)=10   => T=A exp(alpha z)+B
alpha=0.1/md.yts*md.rho_ice*md.heatcapacity/md.thermalconductivity;   %alpha=w rho_ice c /k  and w=0.1m/an
A=10/(exp(alpha*(-1000))-1);    %A=T(bed)/(exp(alpha*bed)-1)  with bed=-1000 T(bed)=10
B=-A;
md.observed_temperature=A*exp(alpha*md.z)+B;

%modeled  results
md=solve(md,ThermalSolutionEnum);

%plot results
comp_temp=zeros(md.numberofnodes,1);
comp_temp(md.results.ThermalSolution.Temperature.index)=md.results.ThermalSolution.Temperature.value;
relative=abs((comp_temp-md.observed_temperature)./md.observed_temperature)*100;
relative(find(comp_temp==md.observed_temperature))=0;
plotmodel(md,'data',comp_temp,'title','Modeled temperature [K]','data','observed_temperature','view',3,...
        'title','Analytical temperature [K]','view',3,'data',comp_temp-md.observed_temperature,...
        'title','Absolute error [K]','view',3,'data',relative,'title','Relative error [%]','view',3,...
        'figposition','mathieu','FontSize#all',20)
if printingflag, 
        set(gcf,'Color','w')
        printmodel('thermaladvection','png','margin','on','marginsize',25,'frame','off','resolution',0.7,'hardcopy','off');
        system(['mv thermaladvection.png ' ISSM_DIR '/website/doc_pdf/validation/Images/EISMINT ']);
end

%Fields and tolerances to track changes
field_names     ={'AdvectionTemperature'};
field_tolerances={1e-13};
field_values    ={comp_temp};