| 1 | %SMBsemic Class definition
|
|---|
| 2 | %
|
|---|
| 3 | % Usage:
|
|---|
| 4 | % SMBsemic=SMBsemic();
|
|---|
| 5 |
|
|---|
| 6 | classdef SMBsemic
|
|---|
| 7 | properties (SetAccess=public)
|
|---|
| 8 | dailysnowfall = NaN;
|
|---|
| 9 | dailyrainfall = NaN;
|
|---|
| 10 | dailydsradiation = NaN;
|
|---|
| 11 | dailydlradiation = NaN;
|
|---|
| 12 | dailywindspeed = NaN;
|
|---|
| 13 | dailypressure = NaN;
|
|---|
| 14 | dailyairdensity = NaN;
|
|---|
| 15 | dailyairhumidity = NaN;
|
|---|
| 16 | dailytemperature = NaN;
|
|---|
| 17 | Tamp = NaN;
|
|---|
| 18 | mask = NaN;
|
|---|
| 19 | hice = NaN;
|
|---|
| 20 | hsnow = NaN;
|
|---|
| 21 | qmr = NaN;
|
|---|
| 22 | desfac = 0;
|
|---|
| 23 | desfacElevation = 0;
|
|---|
| 24 | rlaps = 0;
|
|---|
| 25 | rdl = 0;
|
|---|
| 26 | s0gcm = NaN;
|
|---|
| 27 | steps_per_step = 1;
|
|---|
| 28 | averaging = 0;
|
|---|
| 29 | requested_outputs = {};
|
|---|
| 30 |
|
|---|
| 31 | hcrit = 0;
|
|---|
| 32 | rcrit = 0;
|
|---|
| 33 |
|
|---|
| 34 | % albedo
|
|---|
| 35 | albedo = 0; % required for first energy balance calculation of SEMIC
|
|---|
| 36 | albedo_snow = 0; % required for ISBA method
|
|---|
| 37 | albedo_scheme = 0;
|
|---|
| 38 | alb_smax = NaN;
|
|---|
| 39 | alb_smin = NaN;
|
|---|
| 40 | albi = NaN;
|
|---|
| 41 | albl = NaN;
|
|---|
| 42 |
|
|---|
| 43 | % albedo parameters depending on albedo_scheme
|
|---|
| 44 | % for slater
|
|---|
| 45 | tmin = NaN;
|
|---|
| 46 | tmax = NaN;
|
|---|
| 47 |
|
|---|
| 48 | % for isba & denby method
|
|---|
| 49 | mcrit = NaN;
|
|---|
| 50 |
|
|---|
| 51 | % for isba
|
|---|
| 52 | tau_a = NaN;
|
|---|
| 53 | tau_f = NaN;
|
|---|
| 54 | wcrit = NaN;
|
|---|
| 55 |
|
|---|
| 56 | % for alex
|
|---|
| 57 | tmid = NaN;
|
|---|
| 58 | afac = NaN;
|
|---|
| 59 |
|
|---|
| 60 | % method
|
|---|
| 61 | ismethod = 0;
|
|---|
| 62 | end
|
|---|
| 63 | methods
|
|---|
| 64 | function self = SMBsemic(varargin) % {{{
|
|---|
| 65 | switch nargin
|
|---|
| 66 | case 0
|
|---|
| 67 | self=setdefaultparameters(self);
|
|---|
| 68 | otherwise
|
|---|
| 69 | error('constructor not supported');
|
|---|
| 70 | end
|
|---|
| 71 | end % }}}
|
|---|
| 72 | function self = extrude(self,md) % {{{
|
|---|
| 73 | self.dailysnowfall=project3d(md,'vector',self.dailysnowfall,'type','node');
|
|---|
| 74 | self.dailyrainfall=project3d(md,'vector',self.dailyrainfall,'type','node');
|
|---|
| 75 | self.dailydsradiation=project3d(md,'vector',self.dailydsradiation,'type','node');
|
|---|
| 76 | self.dailydlradiation=project3d(md,'vector',self.dailydlradiation,'type','node');
|
|---|
| 77 | self.dailywindspeed=project3d(md,'vector',self.dailywindspeed,'type','node');
|
|---|
| 78 | self.dailypressure=project3d(md,'vector',self.dailypressure,'type','node');
|
|---|
| 79 | self.dailyairdensity=project3d(md,'vector',self.dailyairdensity,'type','node');
|
|---|
| 80 | self.dailyairhumidity=project3d(md,'vector',self.dailyairhumidity,'type','node');
|
|---|
| 81 | self.dailytemperature=project3d(md,'vector',self.dailytemperature,'type','node');
|
|---|
| 82 | self.s0gcm=project3d(md,'vector',self.s0gcm,'type','node');
|
|---|
| 83 |
|
|---|
| 84 | end % }}}
|
|---|
| 85 | function list = defaultoutputs(self,md) % {{{
|
|---|
| 86 | list = {'SmbMassBalance'};
|
|---|
| 87 | end % }}}
|
|---|
| 88 | function list = outputlists(self,md) % {{{
|
|---|
| 89 | if self.ismethod == 1
|
|---|
| 90 | list = {'SmbMassBalance','SmbMassBalanceSnow','SmbMelt','SmbAccumulation',...
|
|---|
| 91 | 'SmbHIce','SmbHSnow','SmbAlbedo','SmbAlbedoSnow','TemperatureSEMIC'};
|
|---|
| 92 | else
|
|---|
| 93 | list = {'SmbMassBalance'};
|
|---|
| 94 | end
|
|---|
| 95 | end % }}}
|
|---|
| 96 | function self = initialize(self,md) % {{{
|
|---|
| 97 | % Explain
|
|---|
| 98 | % initialize SEMIC smb values, such as s0gcm(surface elevation), albedo,
|
|---|
| 99 | % albedo_snow, hice, hsnow, Tamp... values.
|
|---|
| 100 | %
|
|---|
| 101 | %
|
|---|
| 102 | % Usage
|
|---|
| 103 | % md.smb = initialize(md.smb,md);
|
|---|
| 104 |
|
|---|
| 105 | if isnan(self.s0gcm),
|
|---|
| 106 | if ~isnan(md.geometry.surface) & (numel(md.geometry.surface) == md.mesh.numberofvertices)
|
|---|
| 107 | self.s0gcm=md.geometry.surface;
|
|---|
| 108 | disp(' no SMBsemic.s0gcm specified: values from md.geometry.surface');
|
|---|
| 109 | else
|
|---|
| 110 | self.s0gcm=zeros(md.mesh.numberofvertices,1);
|
|---|
| 111 | disp(' no SMBsemic.s0gcm specified: values set as zero');
|
|---|
| 112 | end
|
|---|
| 113 | end
|
|---|
| 114 | if isnan(self.mask),
|
|---|
| 115 | self.mask = 2*ones(md.mesh.numberofvertices,1);
|
|---|
| 116 | disp(' no SMBsemic.mask specified: values set as 2 for ice');
|
|---|
| 117 | end
|
|---|
| 118 |
|
|---|
| 119 | % update each values.
|
|---|
| 120 | if isnan(self.Tamp)
|
|---|
| 121 | self.Tamp= 3*ones(md.mesh.numberofvertices,1);
|
|---|
| 122 | disp(' no SMBsemic.Tamp specified: values set as 3.0');
|
|---|
| 123 | end
|
|---|
| 124 | self.albedo = 0.8*ones(md.mesh.numberofvertices,1);
|
|---|
| 125 | self.albedo_snow= 0.5*ones(md.mesh.numberofvertices,1);
|
|---|
| 126 | self.hice = 10*ones(md.mesh.numberofvertices,1);
|
|---|
| 127 | self.hsnow = 5*ones(md.mesh.numberofvertices,1);
|
|---|
| 128 | self.qmr = zeros(md.mesh.numberofvertices,1);
|
|---|
| 129 | end % }}}
|
|---|
| 130 | function self = setdefaultparameters(self) % {{{
|
|---|
| 131 |
|
|---|
| 132 | % albedo parameters
|
|---|
| 133 | self.albedo_scheme = 0;
|
|---|
| 134 | self.alb_smax = 0.79;
|
|---|
| 135 | self.alb_smin = 0.6;
|
|---|
| 136 | self.albi = 0.41;
|
|---|
| 137 | self.albl = 0.07;
|
|---|
| 138 |
|
|---|
| 139 | % albedo parameters for?
|
|---|
| 140 | % for slater
|
|---|
| 141 | self.tmin = 263.15;
|
|---|
| 142 | self.tmax = 273.15;
|
|---|
| 143 | % for isba & denby
|
|---|
| 144 | self.mcrit = 6e-8;
|
|---|
| 145 | % for isba
|
|---|
| 146 | self.tau_a = 0.008;
|
|---|
| 147 | self.tau_f = 0.24;
|
|---|
| 148 | self.wcrit = 15.0;
|
|---|
| 149 | % for alex
|
|---|
| 150 | self.tmid = 273.35;
|
|---|
| 151 | self.afac = -0.18;
|
|---|
| 152 |
|
|---|
| 153 | self.hcrit = 0.028;% from Krapp et al. (2017)
|
|---|
| 154 | self.rcrit = 0.85; % from Krapp et al. (2017)
|
|---|
| 155 |
|
|---|
| 156 | self.desfac = -log(2.0)/1000;
|
|---|
| 157 | self.desfacElevation = 2000;
|
|---|
| 158 | self.rlaps = 7.4;
|
|---|
| 159 | self.rdl = 0.29;
|
|---|
| 160 |
|
|---|
| 161 | self.ismethod = 0;
|
|---|
| 162 | self.requested_outputs={'default'};
|
|---|
| 163 | end % }}}
|
|---|
| 164 | function md = checkconsistency(self,md,solution,analyses) % {{{
|
|---|
| 165 |
|
|---|
| 166 | if ismember('MasstransportAnalysis',analyses),
|
|---|
| 167 | md = checkfield(md,'fieldname','smb.desfac','<=',1,'numel',1);
|
|---|
| 168 | md = checkfield(md,'fieldname','smb.s0gcm','>=',0,'NaN',1,'Inf',1,'size',[md.mesh.numberofvertices 1]);
|
|---|
| 169 | md = checkfield(md,'fieldname','smb.rlaps','>=',0,'numel',1);
|
|---|
| 170 | md = checkfield(md,'fieldname','smb.rdl','>=',0,'numel',1);
|
|---|
| 171 | md = checkfield(md,'fieldname','smb.dailysnowfall','timeseries',1,'NaN',1,'Inf',1);
|
|---|
| 172 | md = checkfield(md,'fieldname','smb.dailyrainfall','timeseries',1,'NaN',1,'Inf',1);
|
|---|
| 173 | md = checkfield(md,'fieldname','smb.dailydsradiation','timeseries',1,'NaN',1,'Inf',1);
|
|---|
| 174 | md = checkfield(md,'fieldname','smb.dailydlradiation','timeseries',1,'NaN',1,'Inf',1);
|
|---|
| 175 | md = checkfield(md,'fieldname','smb.dailywindspeed','timeseries',1,'NaN',1,'Inf',1);
|
|---|
| 176 | md = checkfield(md,'fieldname','smb.dailypressure','timeseries',1,'NaN',1,'Inf',1);
|
|---|
| 177 | md = checkfield(md,'fieldname','smb.dailyairdensity','timeseries',1,'NaN',1,'Inf',1);
|
|---|
| 178 | md = checkfield(md,'fieldname','smb.dailyairhumidity','timeseries',1,'NaN',1,'Inf',1);
|
|---|
| 179 | md = checkfield(md,'fieldname','smb.dailytemperature','timeseries',1,'NaN',1,'Inf',1);
|
|---|
| 180 |
|
|---|
| 181 | % TODO: transient model should be merged with SEMIC developed by Ruckamp et al. (2018)
|
|---|
| 182 |
|
|---|
| 183 | md = checkfield(md,'fieldname','smb.ismethod','numel',1,'values',[0,1]);
|
|---|
| 184 | if self.ismethod == 1 % transient mode
|
|---|
| 185 | md = checkfield(md,'fieldname','smb.desfacElevation','>=',0,'numel',1);
|
|---|
| 186 |
|
|---|
| 187 | md = checkfield(md,'fieldname','smb.albedo_scheme','NaN',1,'Inf',1,'numel',1,'values',[0,1,2,3,4]);
|
|---|
| 188 | md = checkfield(md,'fieldname','smb.alb_smax','>=',0,'NaN',1,'Inf',1,'numel',1);
|
|---|
| 189 | md = checkfield(md,'fieldname','smb.mask','NaN',1,'Inf',1,'size',[md.mesh.numberofvertices, 1],'values',[0,1,2]);
|
|---|
| 190 |
|
|---|
| 191 | % initial values
|
|---|
| 192 | md = checkfield(md,'fieldname','smb.albedo','NaN',1,'Inf',1,'size',[md.mesh.numberofvertices, 1]);
|
|---|
| 193 | md = checkfield(md,'fieldname','smb.albedo_snow','NaN',1,'Inf',1,'size',[md.mesh.numberofvertices, 1]);
|
|---|
| 194 | md = checkfield(md,'fieldname','smb.alb_smax','>=',0,'<=',1,'NaN',1,'Inf',1,'numel',1);
|
|---|
| 195 | md = checkfield(md,'fieldname','smb.alb_smin','<=',1,'NaN',1,'Inf',1,'numel',1);
|
|---|
| 196 | md = checkfield(md,'fieldname','smb.albi','>=',0,'<=',1,'NaN',1,'Inf',1,'numel',1);
|
|---|
| 197 | md = checkfield(md,'fieldname','smb.albl','>=',0,'<=',1,'NaN',1,'Inf',1,'numel',1);
|
|---|
| 198 | md = checkfield(md,'fieldname','smb.hice','NaN',1,'Inf',1,'size',[md.mesh.numberofvertices, 1]);
|
|---|
| 199 | md = checkfield(md,'fieldname','smb.hsnow','NaN',1,'Inf',1,'size',[md.mesh.numberofvertices, 1]);
|
|---|
| 200 | md = checkfield(md,'fieldname','smb.qmr','NaN',1,'Inf',1,'size',[md.mesh.numberofvertices, 1]);
|
|---|
| 201 | end
|
|---|
| 202 | end
|
|---|
| 203 | md = checkfield(md,'fieldname','smb.steps_per_step','>=',1,'numel',[1]);
|
|---|
| 204 | md = checkfield(md,'fieldname','smb.averaging','numel',[1],'values',[0 1 2]);
|
|---|
| 205 | md = checkfield(md,'fieldname','smb.requested_outputs','stringrow',1);
|
|---|
| 206 |
|
|---|
| 207 | end % }}}
|
|---|
| 208 | function disp(self) % {{{
|
|---|
| 209 | disp(sprintf(' surface forcings parameters:'));
|
|---|
| 210 |
|
|---|
| 211 | disp(sprintf(' Interface for coupling GCM data to the energy balance model SEMIC (Krapp et al (2017) https://doi.org/10.5194/tc-11-1519-2017).'));
|
|---|
| 212 | disp(sprintf(' The implemented coupling uses daily mean GCM input to calculate yearly mean smb, accumulation, ablation, and surface temperature.'));
|
|---|
| 213 | disp(sprintf(' smb and temperatures are updated every year'));
|
|---|
| 214 | disp(sprintf('\n SEMIC parameters:'));
|
|---|
| 215 | fielddisplay(self,'dailysnowfall','daily surface dailysnowfall [m/s]');
|
|---|
| 216 | fielddisplay(self,'dailyrainfall','daily surface dailyrainfall [m/s]');
|
|---|
| 217 | fielddisplay(self,'dailydsradiation','daily downwelling shortwave radiation [W/m2]');
|
|---|
| 218 | fielddisplay(self,'dailydlradiation','daily downwelling longwave radiation [W/m2]');
|
|---|
| 219 | fielddisplay(self,'dailywindspeed','daily surface wind speed [m/s]');
|
|---|
| 220 | fielddisplay(self,'dailypressure','daily surface pressure [Pa]');
|
|---|
| 221 | fielddisplay(self,'dailyairdensity','daily air density [kg/m3]');
|
|---|
| 222 | fielddisplay(self,'dailyairhumidity','daily air specific humidity [kg/kg]');
|
|---|
| 223 | fielddisplay(self,'dailytemperature','daily surface air temperature [K]');
|
|---|
| 224 | fielddisplay(self,'rlaps','present day lapse rate (default is 7.4 [degree/km]; Erokhina et al. 2017)');
|
|---|
| 225 | fielddisplay(self,'desfac','desertification elevation factor (default is -log(2.0)/1000 [1/km]; Vizcaino et al. 2010)');
|
|---|
| 226 | fielddisplay(self,'rdl','longwave downward radiation decrease (default is 0.29 [W/m^2/km]; Marty et al. 2002)');
|
|---|
| 227 | fielddisplay(self,'s0gcm','GCM reference elevation; (default is 0) [m]');
|
|---|
| 228 |
|
|---|
| 229 | fielddisplay(self,'ismethod','method for calculating SMB with SEMIC. Default version of SEMIC is really slow. 0: steady, 1: transient (default: 0)');
|
|---|
| 230 | if self.ismethod == 1 % transient mode
|
|---|
| 231 | fielddisplay(self,'desfacElevation','desertification elevation (default is 2000 m; Vizcaino et al. 2010)');
|
|---|
| 232 | fielddisplay(self,'Tamp','amplitude of diurnal cycle [K]');
|
|---|
| 233 | fielddisplay(self,'albedo','initial albedo [no unit]');
|
|---|
| 234 | fielddisplay(self,'albedo_snow','initial albedo for snow [no unit]');
|
|---|
| 235 | fielddisplay(self,'hice','initial thickness of ice [unit: m]');
|
|---|
| 236 | fielddisplay(self,'hsnow','initial thickness of snow [unit: m]');
|
|---|
| 237 | fielddisplay(self,'mask','masking for albedo. 0: ocean, 1: land, 2: ice (default: 2)');
|
|---|
| 238 | fielddisplay(self,'hcrit','critical snow height for albedo [unit: m]');
|
|---|
| 239 | fielddisplay(self,'rcrit','critical refreezing height for albedo [no unit]');
|
|---|
| 240 |
|
|---|
| 241 | disp(sprintf('\nSEMIC albedo parameters.'));
|
|---|
| 242 | fielddisplay(self,'albedo_scheme','albedo scheme for SEMIC. 0: none, 1: slater, 2: isba, 3: denby, 4: alex (default is 0)');
|
|---|
| 243 | fielddisplay(self,'alb_smax','maximum snow albedo (default: 0.79)');
|
|---|
| 244 | fielddisplay(self,'alb_smin','minimum snow albedo (default: 0.6)');
|
|---|
| 245 | fielddisplay(self,'albi','background albedo for bare ice (default: 0.41)');
|
|---|
| 246 | fielddisplay(self,'albl','background albedo for bare land (default: 0.07)');
|
|---|
| 247 | end
|
|---|
| 248 | % albedo_scheme - 0: none, 1: slater, 2: isba, 3: denby, 4: alex.
|
|---|
| 249 | if self.albedo_scheme == 1
|
|---|
| 250 | disp(sprintf('\n\tSEMIC snow albedo parameters for Slater et al, (1998).'));
|
|---|
| 251 | disp(sprintf('\t alb = alb_smax - (alb_smax - alb_smin)*tm^(3.0)'))
|
|---|
| 252 | disp(sprintf('\t tm = 1 (tsurf > 273.15 K)'));
|
|---|
| 253 | disp(sprintf('\t tm = f*(tsurf-tmin) (tmin <= tsurf < 273.15)'));
|
|---|
| 254 | disp(sprintf('\t 0 (tsurf < tmin)'));
|
|---|
| 255 | disp(sprintf('\t f = 1/(273.15-tmin)'));
|
|---|
| 256 | fielddisplay(self,'tmin','minimum temperature for which albedo decline become effective. (default: 263.15 K)[unit: K])');
|
|---|
| 257 | fielddisplay(self,'tmax','maxmium temperature for which albedo decline become effective. This value should be fixed. (default: 273.15 K)[unit: K])');
|
|---|
| 258 | elseif self.albedo_scheme == 2,
|
|---|
| 259 | disp(sprintf('\n\tSEMIC snow albedo parameters for ISBA.? where is citation?'));
|
|---|
| 260 | fielddisplay(self,'mcrit','critical melt rate (default: 6e-8) [unit: m/sec]');
|
|---|
| 261 | fielddisplay(self,'wcrit','critical liquid water content (default: 15) [unit: kg/m2]');
|
|---|
| 262 | fielddisplay(self,'tau_a','dry albedo decline [unit: 1/day]');
|
|---|
| 263 | fielddisplay(self,'tau_f','wet albedo decline [unit: 1/day]');
|
|---|
| 264 | elseif self.albedo_scheme == 3,
|
|---|
| 265 | disp(sprintf('\n\tSEMIC snow albedo parameters for Denby et al. (2002 Tellus)'));
|
|---|
| 266 | fielddisplay(self,'mcrit','critical melt rate (default: 6e-8) [unit: m/sec]');
|
|---|
| 267 | elseif self.albedo_scheme == 4,
|
|---|
| 268 | disp(sprintf('\n\tSEMIC snow albedo parameters for Alex.?'));
|
|---|
| 269 | fielddisplay(self,'afac','[unit: ?]');
|
|---|
| 270 | fielddisplay(self,'tmid','[unit: ?]');
|
|---|
| 271 | else
|
|---|
| 272 | error(sprintf('ERROR: %d is not supported albedom scheme.',self.albedo_scheme))
|
|---|
| 273 | end
|
|---|
| 274 |
|
|---|
| 275 | fielddisplay(self, 'steps_per_step', 'number of smb steps per time step');
|
|---|
| 276 | fielddisplay(self, 'averaging', 'averaging methods from short to long steps');
|
|---|
| 277 | disp(sprintf('%51s 0: Arithmetic (default)',' '));
|
|---|
| 278 | disp(sprintf('%51s 1: Geometric',' '));
|
|---|
| 279 | disp(sprintf('%51s 2: Harmonic',' '));
|
|---|
| 280 | fielddisplay(self,'requested_outputs','additional outputs requested');
|
|---|
| 281 | end % }}}
|
|---|
| 282 | function marshall(self,prefix,md,fid) % {{{
|
|---|
| 283 |
|
|---|
| 284 | yts=md.constants.yts;
|
|---|
| 285 |
|
|---|
| 286 | WriteData(fid,prefix,'name','md.smb.model','data',12,'format','Integer');
|
|---|
| 287 |
|
|---|
| 288 | WriteData(fid,prefix,'object',self,'class','smb','fieldname','ismethod','format','Integer','values',[0, 1]);
|
|---|
| 289 | WriteData(fid,prefix,'object',self,'class','smb','fieldname','desfac','format','Double');
|
|---|
| 290 | WriteData(fid,prefix,'object',self,'class','smb','fieldname','desfacElevation','format','Double');
|
|---|
| 291 | WriteData(fid,prefix,'object',self,'class','smb','fieldname','s0gcm','format','DoubleMat','mattype',1);
|
|---|
| 292 | WriteData(fid,prefix,'object',self,'class','smb','fieldname','rlaps','format','Double');
|
|---|
| 293 | WriteData(fid,prefix,'object',self,'class','smb','fieldname','rdl','format','Double');
|
|---|
| 294 | WriteData(fid,prefix,'object',self,'class','smb','fieldname','dailysnowfall','format','DoubleMat','mattype',1,'timeserieslength',md.mesh.numberofvertices+1,'yts',yts);
|
|---|
| 295 | WriteData(fid,prefix,'object',self,'class','smb','fieldname','dailyrainfall','format','DoubleMat','mattype',1,'timeserieslength',md.mesh.numberofvertices+1,'yts',yts);
|
|---|
| 296 | WriteData(fid,prefix,'object',self,'class','smb','fieldname','dailydsradiation','format','DoubleMat','mattype',1,'timeserieslength',md.mesh.numberofvertices+1,'yts',yts);
|
|---|
| 297 | WriteData(fid,prefix,'object',self,'class','smb','fieldname','dailydlradiation','format','DoubleMat','mattype',1,'timeserieslength',md.mesh.numberofvertices+1,'yts',yts);
|
|---|
| 298 | WriteData(fid,prefix,'object',self,'class','smb','fieldname','dailywindspeed','format','DoubleMat','mattype',1,'timeserieslength',md.mesh.numberofvertices+1,'yts',yts);
|
|---|
| 299 | WriteData(fid,prefix,'object',self,'class','smb','fieldname','dailypressure','format','DoubleMat','mattype',1,'timeserieslength',md.mesh.numberofvertices+1,'yts',yts);
|
|---|
| 300 | WriteData(fid,prefix,'object',self,'class','smb','fieldname','dailyairdensity','format','DoubleMat','mattype',1,'timeserieslength',md.mesh.numberofvertices+1,'yts',yts);
|
|---|
| 301 | WriteData(fid,prefix,'object',self,'class','smb','fieldname','dailyairhumidity','format','DoubleMat','mattype',1,'timeserieslength',md.mesh.numberofvertices+1,'yts',yts);
|
|---|
| 302 | WriteData(fid,prefix,'object',self,'class','smb','fieldname','dailytemperature','format','DoubleMat','mattype',1,'timeserieslength',md.mesh.numberofvertices+1,'yts',yts);
|
|---|
| 303 | % TODO: transient mode should be merged with SEMIC developed by Ruckamp et al. (2018).
|
|---|
| 304 | if self.ismethod == 1% transient mode
|
|---|
| 305 | WriteData(fid,prefix,'object',self,'class','smb','fieldname','Tamp','format','DoubleMat','mattype',1);
|
|---|
| 306 | WriteData(fid,prefix,'object',self,'class','smb','fieldname','mask','format','DoubleMat','mattype',1);
|
|---|
| 307 | WriteData(fid,prefix,'object',self,'class','smb','fieldname','hice','format','DoubleMat','mattype',1);
|
|---|
| 308 | WriteData(fid,prefix,'object',self,'class','smb','fieldname','hsnow','format','DoubleMat','mattype',1);
|
|---|
| 309 | WriteData(fid,prefix,'object',self,'class','smb','fieldname','qmr','format','DoubleMat','mattype',1);
|
|---|
| 310 |
|
|---|
| 311 | WriteData(fid,prefix,'object',self,'class','smb','fieldname','hcrit','format','Double');
|
|---|
| 312 | WriteData(fid,prefix,'object',self,'class','smb','fieldname','rcrit','format','Double');
|
|---|
| 313 |
|
|---|
| 314 | %albedo
|
|---|
| 315 | WriteData(fid,prefix,'object',self,'class','smb','fieldname','albedo','format','DoubleMat','mattype',1);
|
|---|
| 316 | WriteData(fid,prefix,'object',self,'class','smb','fieldname','albedo_snow','format','DoubleMat','mattype',1);
|
|---|
| 317 | WriteData(fid,prefix,'object',self,'class','smb','fieldname','albedo_scheme','format','Integer');
|
|---|
| 318 | WriteData(fid,prefix,'object',self,'class','smb','fieldname','albi','format','Double');
|
|---|
| 319 | WriteData(fid,prefix,'object',self,'class','smb','fieldname','albl','format','Double');
|
|---|
| 320 | WriteData(fid,prefix,'object',self,'class','smb','fieldname','alb_smin','format','Double');
|
|---|
| 321 | WriteData(fid,prefix,'object',self,'class','smb','fieldname','alb_smax','format','Double');
|
|---|
| 322 |
|
|---|
| 323 | %albedo parameters for ?
|
|---|
| 324 | %for slater
|
|---|
| 325 | WriteData(fid,prefix,'object',self,'class','smb','fieldname','tmin','format','Double');
|
|---|
| 326 | WriteData(fid,prefix,'object',self,'class','smb','fieldname','tmax','format','Double');
|
|---|
| 327 | %for isba & denby
|
|---|
| 328 | WriteData(fid,prefix,'object',self,'class','smb','fieldname','mcrit','format','Double');
|
|---|
| 329 | %for isba
|
|---|
| 330 | WriteData(fid,prefix,'object',self,'class','smb','fieldname','wcrit','format','Double');
|
|---|
| 331 | WriteData(fid,prefix,'object',self,'class','smb','fieldname','tau_a','format','Double');
|
|---|
| 332 | WriteData(fid,prefix,'object',self,'class','smb','fieldname','tau_f','format','Double');
|
|---|
| 333 | %for alex
|
|---|
| 334 | WriteData(fid,prefix,'object',self,'class','smb','fieldname','tmid','format','Double');
|
|---|
| 335 | WriteData(fid,prefix,'object',self,'class','smb','fieldname','afac','format','Double');
|
|---|
| 336 | end
|
|---|
| 337 |
|
|---|
| 338 | WriteData(fid,prefix,'object',self,'fieldname','steps_per_step','format','Integer');
|
|---|
| 339 | WriteData(fid,prefix,'object',self,'fieldname','averaging','format','Integer');
|
|---|
| 340 |
|
|---|
| 341 | %process requested outputs
|
|---|
| 342 | outputs = self.requested_outputs;
|
|---|
| 343 | pos = find(ismember(outputs,'default'));
|
|---|
| 344 | if ~isempty(pos),
|
|---|
| 345 | outputs(pos) = []; %remove 'default' from outputs
|
|---|
| 346 | outputs = [outputs defaultoutputs(self,md)]; %add defaults
|
|---|
| 347 | end
|
|---|
| 348 | WriteData(fid,prefix,'data',outputs,'name','md.smb.requested_outputs','format','StringArray');
|
|---|
| 349 |
|
|---|
| 350 | end % }}}
|
|---|
| 351 | end
|
|---|
| 352 | end
|
|---|
![(please configure the [header_logo] section in trac.ini)](/trac/issm/chrome/common/trac_banner.png)
