source: issm/trunk-jpl/src/c/analyses/SmbAnalysis.cpp@ 24626

Last change on this file since 24626 was 24626, checked in by Mathieu Morlighem, 5 years ago

CHG: speeding up SMB model with reconstructed T and P
File size: 24.4 KB
Line 
1#include "./SmbAnalysis.h"
2#include "../toolkits/toolkits.h"
3#include "../classes/classes.h"
4#include "../shared/shared.h"
5#include "../modules/modules.h"
6
7// FIX
8#include "./shared/io/Print/Print.h"
9
10/*Model processing*/
11void SmbAnalysis::CreateConstraints(Constraints* constraints,IoModel* iomodel){/*{{{*/
12 /*No constraints*/
13}/*}}}*/
14void SmbAnalysis::CreateLoads(Loads* loads, IoModel* iomodel){/*{{{*/
15 /*No loads*/
16}/*}}}*/
17void SmbAnalysis::CreateNodes(Nodes* nodes,IoModel* iomodel,bool isamr){/*{{{*/
18 ::CreateNodes(nodes,iomodel,SmbAnalysisEnum,P1Enum);
19}/*}}}*/
20int SmbAnalysis::DofsPerNode(int** doflist,int domaintype,int approximation){/*{{{*/
21 return 1;
22}/*}}}*/
23void SmbAnalysis::UpdateElements(Elements* elements,Inputs2* inputs2,IoModel* iomodel,int analysis_counter,int analysis_type){/*{{{*/
24
25 int smb_model;
26 bool isdelta18o,ismungsm,isd18opd,issetpddfac,isprecipscaled,istemperaturescaled,isfirnwarming;
27
28 /*Update elements: */
29 int counter=0;
30 for(int i=0;i<iomodel->numberofelements;i++){
31 if(iomodel->my_elements[i]){
32 Element* element=(Element*)elements->GetObjectByOffset(counter);
33 element->Update(inputs2,i,iomodel,analysis_counter,analysis_type,P1Enum);
34 counter++;
35 }
36 }
37
38 /*Figure out smb model: */
39 iomodel->FindConstant(&smb_model,"md.smb.model");
40 switch(smb_model){
41 case SMBforcingEnum:
42 iomodel->FetchDataToInput(inputs2,elements,"md.smb.mass_balance",SmbMassBalanceEnum,0.);
43 break;
44 case SMBgembEnum:
45 iomodel->FetchDataToInput(inputs2,elements,"md.smb.Ta",SmbTaEnum);
46 iomodel->FetchDataToInput(inputs2,elements,"md.smb.V",SmbVEnum);
47 iomodel->FetchDataToInput(inputs2,elements,"md.smb.dswrf",SmbDswrfEnum);
48 iomodel->FetchDataToInput(inputs2,elements,"md.smb.dlwrf",SmbDlwrfEnum);
49 iomodel->FetchDataToInput(inputs2,elements,"md.smb.P",SmbPEnum);
50 iomodel->FetchDataToInput(inputs2,elements,"md.smb.eAir",SmbEAirEnum);
51 iomodel->FetchDataToInput(inputs2,elements,"md.smb.pAir",SmbPAirEnum);
52 iomodel->FetchDataToInput(inputs2,elements,"md.smb.zTop",SmbZTopEnum);
53 iomodel->FetchDataToInput(inputs2,elements,"md.smb.dzTop",SmbDzTopEnum);
54 iomodel->FetchDataToInput(inputs2,elements,"md.smb.dzMin",SmbDzMinEnum);
55 iomodel->FetchDataToInput(inputs2,elements,"md.smb.zY",SmbZYEnum);
56 iomodel->FetchDataToInput(inputs2,elements,"md.smb.zMax",SmbZMaxEnum);
57 iomodel->FetchDataToInput(inputs2,elements,"md.smb.zMin",SmbZMinEnum);
58 iomodel->FetchDataToInput(inputs2,elements,"md.smb.Tmean",SmbTmeanEnum);
59 iomodel->FetchDataToInput(inputs2,elements,"md.smb.Vmean",SmbVmeanEnum);
60 iomodel->FetchDataToInput(inputs2,elements,"md.smb.C",SmbCEnum);
61 iomodel->FetchDataToInput(inputs2,elements,"md.smb.Tz",SmbTzEnum);
62 iomodel->FetchDataToInput(inputs2,elements,"md.smb.Vz",SmbVzEnum);
63 InputUpdateFromConstantx(inputs2,elements,false,SmbIsInitializedEnum);
64 iomodel->FetchDataToInput(inputs2,elements,"md.smb.Dzini",SmbDziniEnum);
65 iomodel->FetchDataToInput(inputs2,elements,"md.smb.Dini",SmbDiniEnum);
66 iomodel->FetchDataToInput(inputs2,elements,"md.smb.Reini",SmbReiniEnum);
67 iomodel->FetchDataToInput(inputs2,elements,"md.smb.Gdnini",SmbGdniniEnum);
68 iomodel->FetchDataToInput(inputs2,elements,"md.smb.Gspini",SmbGspiniEnum);
69 iomodel->FetchDataToInput(inputs2,elements,"md.smb.ECini",SmbECiniEnum);
70 iomodel->FetchDataToInput(inputs2,elements,"md.smb.Wini",SmbWiniEnum);
71 iomodel->FetchDataToInput(inputs2,elements,"md.smb.Aini",SmbAiniEnum);
72 iomodel->FetchDataToInput(inputs2,elements,"md.smb.Tini",SmbTiniEnum);
73 iomodel->FetchDataToInput(inputs2,elements,"md.smb.Sizeini",SmbSizeiniEnum);
74 iomodel->FetchDataToInput(inputs2,elements,"md.smb.aValue",SmbAValueEnum);
75 iomodel->FetchDataToInput(inputs2,elements,"md.smb.teValue",SmbTeValueEnum);
76 break;
77 case SMBpddEnum:
78 iomodel->FindConstant(&isdelta18o,"md.smb.isdelta18o");
79 iomodel->FindConstant(&ismungsm,"md.smb.ismungsm");
80 iomodel->FetchDataToInput(inputs2,elements,"md.thermal.spctemperature",ThermalSpctemperatureEnum);
81 iomodel->FetchDataToInput(inputs2,elements,"md.smb.s0p",SmbS0pEnum);
82 iomodel->FetchDataToInput(inputs2,elements,"md.smb.s0t",SmbS0tEnum);
83 if(isdelta18o || ismungsm){
84 iomodel->FetchDataToDatasetInput(inputs2,elements,"md.smb.temperatures_lgm",SmbTemperaturesLgmEnum);
85 iomodel->FetchDataToDatasetInput(inputs2,elements,"md.smb.temperatures_presentday",SmbTemperaturesPresentdayEnum);
86 iomodel->FetchDataToDatasetInput(inputs2,elements,"md.smb.precipitations_presentday",SmbPrecipitationsPresentdayEnum);
87 iomodel->FetchDataToDatasetInput(inputs2,elements,"md.smb.precipitations_lgm",SmbPrecipitationsLgmEnum);
88 }else{
89 iomodel->FetchDataToDatasetInput(inputs2,elements,"md.smb.precipitation",SmbPrecipitationEnum);
90 iomodel->FetchDataToDatasetInput(inputs2,elements,"md.smb.monthlytemperatures",SmbMonthlytemperaturesEnum);
91 }
92 break;
93 case SMBpddSicopolisEnum:
94 iomodel->FetchDataToInput(inputs2,elements,"md.smb.s0p",SmbS0pEnum);
95 iomodel->FetchDataToInput(inputs2,elements,"md.smb.s0t",SmbS0tEnum);
96 iomodel->FindConstant(&isfirnwarming,"md.smb.isfirnwarming");
97 iomodel->FetchDataToInput(inputs2,elements,"md.smb.smb_corr",SmbSmbCorrEnum);
98 iomodel->FetchDataToInput(inputs2,elements,"md.smb.precipitation_anomaly",SmbPrecipitationsAnomalyEnum);
99 iomodel->FetchDataToInput(inputs2,elements,"md.smb.temperature_anomaly",SmbTemperaturesAnomalyEnum);
100 iomodel->FetchDataToDatasetInput(inputs2,elements,"md.smb.monthlytemperatures",SmbMonthlytemperaturesEnum);
101 iomodel->FetchDataToDatasetInput(inputs2,elements,"md.smb.precipitation",SmbPrecipitationEnum);
102 break;
103 case SMBd18opddEnum:
104 iomodel->FindConstant(&istemperaturescaled,"md.smb.istemperaturescaled");
105 iomodel->FindConstant(&isprecipscaled,"md.smb.isprecipscaled");
106 iomodel->FindConstant(&ismungsm,"md.smb.ismungsm");
107 iomodel->FindConstant(&isd18opd,"md.smb.isd18opd");
108 iomodel->FindConstant(&issetpddfac,"md.smb.issetpddfac");
109 iomodel->FetchDataToInput(inputs2,elements,"md.thermal.spctemperature",ThermalSpctemperatureEnum);
110 iomodel->FetchDataToInput(inputs2,elements,"md.smb.s0p",SmbS0pEnum);
111 iomodel->FetchDataToInput(inputs2,elements,"md.smb.s0t",SmbS0tEnum);
112 if(isd18opd){
113 iomodel->FetchDataToDatasetInput(inputs2,elements,"md.smb.temperatures_presentday",SmbTemperaturesPresentdayEnum);
114 iomodel->FetchDataToDatasetInput(inputs2,elements,"md.smb.precipitations_presentday",SmbPrecipitationsPresentdayEnum);
115 if(!istemperaturescaled){
116 /*Fetch array*/
117 IssmDouble* doublearray = NULL;
118 int M,N;
119 iomodel->FetchData(&doublearray,&M,&N,"md.smb.temperatures_reconstructed");
120 if(M!=iomodel->numberofvertices+1) _error_("md.smb.temperatures_reconstructed should have nbv+1 rows");
121 if(N%12!=0) _error_("md.smb.temperatures_reconstructed should have a multiple of 12 columns (since it is monthly)");
122
123 /*Build indices*/
124 int* ids = xNew<int>(N); for(int i=0;i<N;i++) ids[i] = i;
125
126 for(int i=0;i<elements->Size();i++){
127 Element* element=xDynamicCast<Element*>(elements->GetObjectByOffset(i));
128 element->DatasetInputCreate(doublearray,M-1,N,ids,N,inputs2,iomodel,SmbTemperaturesReconstructedEnum);
129 }
130 xDelete<int>(ids);
131 iomodel->DeleteData(doublearray,"md.smb.temperatures_reconstructed");
132 }
133 if(!isprecipscaled){
134 /*Fetch array*/
135 IssmDouble* doublearray = NULL;
136 int M,N;
137 iomodel->FetchData(&doublearray,&M,&N,"md.smb.precipitations_reconstructed");
138 if(M!=iomodel->numberofvertices+1) _error_("md.smb.precipitations_reconstructed should have nbv+1 rows");
139 if(N%12!=0) _error_("md.smb.precipitations_reconstructed should have a multiple of 12 columns (since it is monthly)");
140
141 /*Build indices*/
142 int* ids = xNew<int>(N); for(int i=0;i<N;i++) ids[i] = i;
143
144 for(int i=0;i<elements->Size();i++){
145 Element* element=xDynamicCast<Element*>(elements->GetObjectByOffset(i));
146 element->DatasetInputCreate(doublearray,M-1,N,ids,N,inputs2,iomodel,SmbPrecipitationsReconstructedEnum);
147 }
148 xDelete<int>(ids);
149 iomodel->DeleteData(doublearray,"md.smb.precipitations_reconstructed");
150 }
151 }
152 if(issetpddfac){
153 iomodel->FetchDataToInput(inputs2,elements,"md.smb.pddfac_snow",SmbPddfacSnowEnum,-1.);
154 iomodel->FetchDataToInput(inputs2,elements,"md.smb.pddfac_ice",SmbPddfacIceEnum,-1.);
155 }
156 break;
157 case SMBgradientsEnum:
158 iomodel->FetchDataToInput(inputs2,elements,"md.smb.href",SmbHrefEnum);
159 iomodel->FetchDataToInput(inputs2,elements,"md.smb.smbref",SmbSmbrefEnum);
160 iomodel->FetchDataToInput(inputs2,elements,"md.smb.b_pos",SmbBPosEnum);
161 iomodel->FetchDataToInput(inputs2,elements,"md.smb.b_neg",SmbBNegEnum);
162 break;
163 case SMBgradientselaEnum:
164 iomodel->FetchDataToInput(inputs2,elements,"md.smb.ela",SmbElaEnum);
165 iomodel->FetchDataToInput(inputs2,elements,"md.smb.b_pos",SmbBPosEnum);
166 iomodel->FetchDataToInput(inputs2,elements,"md.smb.b_neg",SmbBNegEnum);
167 iomodel->FetchDataToInput(inputs2,elements,"md.smb.b_max",SmbBMaxEnum);
168 iomodel->FetchDataToInput(inputs2,elements,"md.smb.b_min",SmbBMinEnum);
169 break;
170 case SMBhenningEnum:
171 iomodel->FetchDataToInput(inputs2,elements,"md.smb.smbref",SmbSmbrefEnum,0.);
172 break;
173 case SMBcomponentsEnum:
174 iomodel->FetchDataToInput(inputs2,elements,"md.smb.accumulation",SmbAccumulationEnum,0.);
175 iomodel->FetchDataToInput(inputs2,elements,"md.smb.evaporation",SmbEvaporationEnum,0.);
176 iomodel->FetchDataToInput(inputs2,elements,"md.smb.runoff",SmbRunoffEnum,0.);
177 break;
178 case SMBmeltcomponentsEnum:
179 iomodel->FetchDataToInput(inputs2,elements,"md.smb.accumulation",SmbAccumulationEnum,0.);
180 iomodel->FetchDataToInput(inputs2,elements,"md.smb.evaporation",SmbEvaporationEnum,0.);
181 iomodel->FetchDataToInput(inputs2,elements,"md.smb.melt",SmbMeltEnum,0.);
182 iomodel->FetchDataToInput(inputs2,elements,"md.smb.refreeze",SmbRefreezeEnum,0.);
183 break;
184 case SMBgradientscomponentsEnum:
185 /* Nothing to add to input */
186 break;
187 case SMBsemicEnum:
188 iomodel->FetchDataToInput(inputs2,elements,"md.thermal.spctemperature",ThermalSpctemperatureEnum);
189 iomodel->FetchDataToInput(inputs2,elements,"md.smb.s0gcm",SmbS0gcmEnum);
190 iomodel->FetchDataToInput(inputs2,elements,"md.smb.dailysnowfall",SmbDailysnowfallEnum);
191 iomodel->FetchDataToInput(inputs2,elements,"md.smb.dailyrainfall",SmbDailyrainfallEnum);
192 iomodel->FetchDataToInput(inputs2,elements,"md.smb.dailydsradiation",SmbDailydsradiationEnum);
193 iomodel->FetchDataToInput(inputs2,elements,"md.smb.dailydlradiation",SmbDailydlradiationEnum);
194 iomodel->FetchDataToInput(inputs2,elements,"md.smb.dailywindspeed",SmbDailywindspeedEnum);
195 iomodel->FetchDataToInput(inputs2,elements,"md.smb.dailypressure",SmbDailypressureEnum);
196 iomodel->FetchDataToInput(inputs2,elements,"md.smb.dailyairdensity",SmbDailyairdensityEnum);
197 iomodel->FetchDataToInput(inputs2,elements,"md.smb.dailyairhumidity",SmbDailyairhumidityEnum);
198 iomodel->FetchDataToInput(inputs2,elements,"md.smb.dailytemperature",SmbDailytemperatureEnum);
199 break;
200 default:
201 _error_("Surface mass balance model "<<EnumToStringx(smb_model)<<" not supported yet");
202 }
203
204}/*}}}*/
205void SmbAnalysis::UpdateParameters(Parameters* parameters,IoModel* iomodel,int solution_enum,int analysis_enum){/*{{{*/
206
207 int numoutputs;
208 char** requestedoutputs = NULL;
209 bool isdelta18o,ismungsm,isd18opd,issetpddfac,interp,isfirnwarming;
210 int smb_model, smbslices;
211 IssmDouble *temp = NULL;
212 int N,M;
213
214 parameters->AddObject(iomodel->CopyConstantObject("md.smb.model",SmbEnum));
215
216 iomodel->FindConstant(&smb_model,"md.smb.model");
217 iomodel->FindConstant(&interp,"md.timestepping.interp_forcings");
218
219 iomodel->FetchData(&smbslices,"md.smb.steps_per_step");
220 parameters->AddObject(new IntParam(SmbStepsPerStepEnum,smbslices));
221
222 switch(smb_model){
223 case SMBforcingEnum:
224 parameters->AddObject(iomodel->CopyConstantObject("md.smb.isclimatology",SmbIsclimatologyEnum));
225 break;
226 case SMBgembEnum:
227 parameters->AddObject(iomodel->CopyConstantObject("md.smb.aIdx",SmbAIdxEnum));
228 parameters->AddObject(iomodel->CopyConstantObject("md.smb.swIdx",SmbSwIdxEnum));
229 parameters->AddObject(iomodel->CopyConstantObject("md.smb.denIdx",SmbDenIdxEnum));
230 parameters->AddObject(iomodel->CopyConstantObject("md.smb.dsnowIdx",SmbDsnowIdxEnum));
231 parameters->AddObject(iomodel->CopyConstantObject("md.smb.cldFrac",SmbCldFracEnum));
232 parameters->AddObject(iomodel->CopyConstantObject("md.smb.t0wet",SmbT0wetEnum));
233 parameters->AddObject(iomodel->CopyConstantObject("md.smb.t0dry",SmbT0dryEnum));
234 parameters->AddObject(iomodel->CopyConstantObject("md.smb.K",SmbKEnum));
235 parameters->AddObject(iomodel->CopyConstantObject("md.smb.aSnow",SmbASnowEnum));
236 parameters->AddObject(iomodel->CopyConstantObject("md.smb.aIce",SmbAIceEnum));
237 parameters->AddObject(iomodel->CopyConstantObject("md.smb.dt",SmbDtEnum));
238 parameters->AddObject(iomodel->CopyConstantObject("md.smb.isgraingrowth",SmbIsgraingrowthEnum));
239 parameters->AddObject(iomodel->CopyConstantObject("md.smb.isalbedo",SmbIsalbedoEnum));
240 parameters->AddObject(iomodel->CopyConstantObject("md.smb.isshortwave",SmbIsshortwaveEnum));
241 parameters->AddObject(iomodel->CopyConstantObject("md.smb.isthermal",SmbIsthermalEnum));
242 parameters->AddObject(iomodel->CopyConstantObject("md.smb.isaccumulation",SmbIsaccumulationEnum));
243 parameters->AddObject(iomodel->CopyConstantObject("md.smb.ismelt",SmbIsmeltEnum));
244 parameters->AddObject(iomodel->CopyConstantObject("md.smb.isdensification",SmbIsdensificationEnum));
245 parameters->AddObject(iomodel->CopyConstantObject("md.smb.isturbulentflux",SmbIsturbulentfluxEnum));
246 parameters->AddObject(iomodel->CopyConstantObject("md.smb.isclimatology",SmbIsclimatologyEnum));
247 parameters->AddObject(iomodel->CopyConstantObject("md.smb.InitDensityScaling",SmbInitDensityScalingEnum));
248 parameters->AddObject(iomodel->CopyConstantObject("md.smb.ThermoDeltaTScaling",SmbThermoDeltaTScalingEnum));
249 parameters->AddObject(iomodel->CopyConstantObject("md.smb.adThresh",SmbAdThreshEnum));
250 break;
251 case SMBpddEnum:
252 parameters->AddObject(iomodel->CopyConstantObject("md.smb.isdelta18o",SmbIsdelta18oEnum));
253 parameters->AddObject(iomodel->CopyConstantObject("md.smb.ismungsm",SmbIsmungsmEnum));
254 parameters->AddObject(iomodel->CopyConstantObject("md.smb.issetpddfac",SmbIssetpddfacEnum));
255 iomodel->FindConstant(&isdelta18o,"md.smb.isdelta18o");
256 iomodel->FindConstant(&ismungsm,"md.smb.ismungsm");
257
258 if(ismungsm){
259 iomodel->FetchData(&temp,&N,&M,"md.smb.Pfac"); _assert_(N==2);
260 parameters->AddObject(new TransientParam(SmbPfacEnum,&temp[0],&temp[M],interp,M));
261 iomodel->DeleteData(temp,"md.smb.Pfac");
262
263 iomodel->FetchData(&temp,&N,&M,"md.smb.Tdiff"); _assert_(N==2);
264 parameters->AddObject(new TransientParam(SmbTdiffEnum,&temp[0],&temp[M],interp,M));
265 iomodel->DeleteData(temp,"md.smb.Tdiff");
266
267 iomodel->FetchData(&temp,&N,&M,"md.smb.sealev"); _assert_(N==2);
268 parameters->AddObject(new TransientParam(SmbSealevEnum,&temp[0],&temp[M],interp,M));
269 iomodel->DeleteData(temp,"md.smb.sealev");
270 }
271 if(isdelta18o){
272 iomodel->FetchData(&temp,&N,&M,"md.smb.delta18o"); _assert_(N==2);
273 parameters->AddObject(new TransientParam(SmbDelta18oEnum,&temp[0],&temp[M],interp,M));
274 iomodel->DeleteData(temp,"md.smb.delta18o");
275
276 iomodel->FetchData(&temp,&N,&M,"md.smb.delta18o_surface"); _assert_(N==2);
277 parameters->AddObject(new TransientParam(SmbDelta18oSurfaceEnum,&temp[0],&temp[M],interp,M));
278 iomodel->DeleteData(temp,"md.smb.delta18o_surface");
279 }
280
281 break;
282 case SMBpddSicopolisEnum:
283 parameters->AddObject(iomodel->CopyConstantObject("md.smb.isfirnwarming",SmbIsfirnwarmingEnum));
284 break;
285 case SMBd18opddEnum:
286 parameters->AddObject(iomodel->CopyConstantObject("md.smb.ismungsm",SmbIsmungsmEnum));
287 parameters->AddObject(iomodel->CopyConstantObject("md.smb.isd18opd",SmbIsd18opdEnum));
288 parameters->AddObject(iomodel->CopyConstantObject("md.smb.issetpddfac",SmbIssetpddfacEnum));
289 iomodel->FindConstant(&ismungsm,"md.smb.ismungsm");
290 iomodel->FindConstant(&isd18opd,"md.smb.isd18opd");
291 iomodel->FindConstant(&issetpddfac,"md.smb.issetpddfac");
292 if(isd18opd){
293 parameters->AddObject(iomodel->CopyConstantObject("md.smb.f",SmbFEnum));
294 parameters->AddObject(iomodel->CopyConstantObject("md.smb.istemperaturescaled",SmbIstemperaturescaledEnum));
295 parameters->AddObject(iomodel->CopyConstantObject("md.smb.isprecipscaled",SmbIsprecipscaledEnum));
296 iomodel->FetchData(&temp,&N,&M,"md.smb.delta18o"); _assert_(N==2);
297 parameters->AddObject(new TransientParam(SmbDelta18oEnum,&temp[0],&temp[M],interp,M));
298 iomodel->DeleteData(temp,"md.smb.delta18o");
299
300 IssmDouble yts;
301 bool istemperaturescaled,isprecipscaled;
302 iomodel->FindConstant(&yts,"md.constants.yts");
303 iomodel->FindConstant(&istemperaturescaled,"md.smb.istemperaturescaled");
304 iomodel->FindConstant(&isprecipscaled,"md.smb.isprecipscaled");
305 if(!istemperaturescaled){
306 /*Fetch array*/
307 IssmDouble* doublearray = NULL;
308 int M,N;
309 iomodel->FetchData(&doublearray,&M,&N,"md.smb.temperatures_reconstructed");
310 if(M!=iomodel->numberofvertices+1) _error_("md.smb.temperatures_reconstructed should have nbv+1 rows");
311 if(N%12!=0) _error_("md.smb.temperatures_reconstructed should have a multiple of 12 columns (since it is monthly)");
312 int numyears = N/12; _assert_(numyears*12==N);
313
314 /*Check times*/
315 #ifdef _ISSM_DEBUG_
316 for(int i=0;i<numyears;i++){
317 for(int j=1;j<12;j++){
318 //_assert_(floor(doublearray[(M-1)*N+i*12+j]/yts)==floor(doublearray[(M-1)*N+i*12]/yts));
319 _assert_(doublearray[(M-1)*N+i*12+j]>doublearray[(M-1)*N+i*12+j-1]);
320 }
321 }
322 #endif
323
324 /*Build time*/
325 IssmDouble* times = xNew<IssmDouble>(numyears); for(int i=0;i<numyears;i++) times[i] = doublearray[(M-1)*N+i*12];
326 parameters->AddObject(new DoubleVecParam(SmbTemperaturesReconstructedYearsEnum,times,numyears));
327 xDelete<IssmDouble>(times);
328 iomodel->DeleteData(doublearray,"md.smb.temperatures_reconstructed");
329 }
330 if(!isprecipscaled){
331 /*Fetch array*/
332 IssmDouble* doublearray = NULL;
333 int M,N;
334 iomodel->FetchData(&doublearray,&M,&N,"md.smb.precipitations_reconstructed");
335 if(M!=iomodel->numberofvertices+1) _error_("md.smb.precipitations_reconstructed should have nbv+1 rows");
336 if(N%12!=0) _error_("md.smb.precipitations_reconstructed should have a multiple of 12 columns (since it is monthly)");
337 int numyears = N/12; _assert_(numyears*12==N);
338
339 /*Check times*/
340 #ifdef _ISSM_DEBUG_
341 for(int i=0;i<numyears;i++){
342 for(int j=1;j<12;j++){
343 //_assert_(floor(doublearray[(M-1)*N+i*12+j]/yts)==floor(doublearray[(M-1)*N+i*12]/yts));
344 _assert_(doublearray[(M-1)*N+i*12+j]>doublearray[(M-1)*N+i*12+j-1]);
345 }
346 }
347 #endif
348
349 /*Build time*/
350 IssmDouble* times = xNew<IssmDouble>(numyears); for(int i=0;i<numyears;i++) times[i] = doublearray[(M-1)*N+i*12];
351 parameters->AddObject(new DoubleVecParam(SmbPrecipitationsReconstructedYearsEnum,times,numyears));
352 xDelete<IssmDouble>(times);
353 iomodel->DeleteData(doublearray,"md.smb.precipitations_reconstructed");
354 }
355 }
356
357 break;
358 case SMBgradientsEnum:
359 /*Nothing to add to parameters*/
360 break;
361 case SMBgradientselaEnum:
362 /*Nothing to add to parameters*/
363 break;
364 case SMBhenningEnum:
365 /*Nothing to add to parameters*/
366 break;
367 case SMBcomponentsEnum:
368 parameters->AddObject(iomodel->CopyConstantObject("md.smb.isclimatology",SmbIsclimatologyEnum));
369 break;
370 case SMBmeltcomponentsEnum:
371 parameters->AddObject(iomodel->CopyConstantObject("md.smb.isclimatology",SmbIsclimatologyEnum));
372 break;
373 case SMBgradientscomponentsEnum:
374 parameters->AddObject(iomodel->CopyConstantObject("md.smb.accualti",SmbAccualtiEnum));
375 parameters->AddObject(iomodel->CopyConstantObject("md.smb.accugrad",SmbAccugradEnum));
376 parameters->AddObject(iomodel->CopyConstantObject("md.smb.runoffalti",SmbRunoffaltiEnum));
377 parameters->AddObject(iomodel->CopyConstantObject("md.smb.runoffgrad",SmbRunoffgradEnum));
378
379 iomodel->FetchData(&temp,&N,&M,"md.smb.accuref"); _assert_(N==2);
380 parameters->AddObject(new TransientParam(SmbAccurefEnum,&temp[0],&temp[M],interp,M));
381 iomodel->DeleteData(temp,"md.smb.accuref");
382
383 iomodel->FetchData(&temp,&N,&M,"md.smb.runoffref"); _assert_(N==2);
384 parameters->AddObject(new TransientParam(SmbRunoffrefEnum,&temp[0],&temp[M],interp,M));
385 iomodel->DeleteData(temp,"md.smb.runoffref");
386 break;
387 case SMBsemicEnum:
388 /*Nothing to add to parameters*/
389 break;
390 default:
391 _error_("Surface mass balance model "<<EnumToStringx(smb_model)<<" not supported yet");
392 }
393
394 iomodel->FindConstant(&requestedoutputs,&numoutputs,"md.smb.requested_outputs");
395 parameters->AddObject(new IntParam(SmbNumRequestedOutputsEnum,numoutputs));
396 if(numoutputs)parameters->AddObject(new StringArrayParam(SmbRequestedOutputsEnum,requestedoutputs,numoutputs));
397 iomodel->DeleteData(&requestedoutputs,numoutputs,"md.smb.requested_outputs");
398
399}/*}}}*/
400
401/*Finite Element Analysis*/
402void SmbAnalysis::Core(FemModel* femmodel){/*{{{*/
403
404 int smb_model;
405
406 /*Figure out smb model: */
407 femmodel->parameters->FindParam(&smb_model,SmbEnum);
408
409 /*branch to correct module*/
410 switch(smb_model){
411 case SMBforcingEnum:
412 SmbForcingx(femmodel);
413 break;
414 case SMBgembEnum:
415 Gembx(femmodel);
416 break;
417 case SMBpddEnum:
418 bool isdelta18o,ismungsm;
419 femmodel->parameters->FindParam(&isdelta18o,SmbIsdelta18oEnum);
420 femmodel->parameters->FindParam(&ismungsm,SmbIsmungsmEnum);
421 if(isdelta18o){
422 if(VerboseSolution()) _printf0_(" call Delta18oParameterization module\n");
423 Delta18oParameterizationx(femmodel);
424 }
425 if(ismungsm){
426 if(VerboseSolution()) _printf0_(" call MungsmtpParameterization module\n");
427 MungsmtpParameterizationx(femmodel);
428 }
429 if(VerboseSolution()) _printf0_(" call positive degree day module\n");
430 PositiveDegreeDayx(femmodel);
431 break;
432 case SMBpddSicopolisEnum:
433 if(VerboseSolution()) _printf0_(" call SICOPOLIS positive degree day module\n");
434 PositiveDegreeDaySicopolisx(femmodel);
435 break;
436 case SMBd18opddEnum:
437 bool isd18opd;
438 femmodel->parameters->FindParam(&isd18opd,SmbIsd18opdEnum);
439 if(isd18opd){
440 if(VerboseSolution()) _printf0_(" call Delta18opdParameterization module\n");
441 Delta18opdParameterizationx(femmodel);
442 if(VerboseSolution()) _printf0_(" call positive degree day module\n");
443 PositiveDegreeDayx(femmodel);
444 }
445 break;
446 case SMBgradientsEnum:
447 if(VerboseSolution())_printf0_(" call smb gradients module\n");
448 SmbGradientsx(femmodel);
449 break;
450 case SMBgradientselaEnum:
451 if(VerboseSolution())_printf0_(" call smb gradients ela module\n");
452 SmbGradientsElax(femmodel);
453 break;
454 case SMBhenningEnum:
455 if(VerboseSolution())_printf0_(" call smb Henning module\n");
456 SmbHenningx(femmodel);
457 break;
458 case SMBcomponentsEnum:
459 if(VerboseSolution())_printf0_(" call smb Components module\n");
460 SmbComponentsx(femmodel);
461 break;
462 case SMBmeltcomponentsEnum:
463 if(VerboseSolution())_printf0_(" call smb Melt Components module\n");
464 SmbMeltComponentsx(femmodel);
465 break;
466 case SMBgcmEnum:
467 /*Nothing to be done*/
468 break;
469 case SMBgradientscomponentsEnum:
470 if(VerboseSolution())_printf0_(" call smb gradients components module\n");
471 SmbGradientsComponentsx(femmodel);
472 break;
473 case SMBsemicEnum:
474 #ifdef _HAVE_SEMIC_
475 if(VerboseSolution())_printf0_(" call smb SEMIC module\n");
476 SmbSemicx(femmodel);
477 #else
478 _error_("SEMIC not installed");
479 #endif //_HAVE_SEMIC_
480 break;
481 default:
482 _error_("Surface mass balance model "<<EnumToStringx(smb_model)<<" not supported yet");
483 }
484
485}/*}}}*/
486ElementVector* SmbAnalysis::CreateDVector(Element* element){/*{{{*/
487 _error_("not implemented");
488}/*}}}*/
489ElementMatrix* SmbAnalysis::CreateJacobianMatrix(Element* element){/*{{{*/
490_error_("Not implemented");
491}/*}}}*/
492ElementMatrix* SmbAnalysis::CreateKMatrix(Element* element){/*{{{*/
493 _error_("not implemented yet");
494}/*}}}*/
495ElementVector* SmbAnalysis::CreatePVector(Element* element){/*{{{*/
496_error_("not implemented yet");
497}/*}}}*/
498void SmbAnalysis::GetSolutionFromInputs(Vector<IssmDouble>* solution,Element* element){/*{{{*/
499 _error_("not implemented yet");
500}/*}}}*/
501void SmbAnalysis::GradientJ(Vector<IssmDouble>* gradient,Element* element,int control_type,int control_index){/*{{{*/
502 _error_("Not implemented yet");
503}/*}}}*/
504void SmbAnalysis::InputUpdateFromSolution(IssmDouble* solution,Element* element){/*{{{*/
505 _error_("not implemented yet");
506}/*}}}*/
507void SmbAnalysis::UpdateConstraints(FemModel* femmodel){/*{{{*/
508 /*Default, do nothing*/
509 return;
510}/*}}}*/
Note: See TracBrowser for help on using the repository browser.