source: issm/trunk-jpl/src/c/analyses/SmbAnalysis.cpp@ 24253

Last change on this file since 24253 was 24253, checked in by Mathieu Morlighem, 5 years ago

CHG: not needed
File size: 20.0 KB
Line 
1#include "./SmbAnalysis.h"
2#include "../toolkits/toolkits.h"
3#include "../classes/classes.h"
4#include "../shared/shared.h"
5#include "../modules/modules.h"
6
7// FIX
8#include "./shared/io/Print/Print.h"
9
10/*Model processing*/
11void SmbAnalysis::CreateConstraints(Constraints* constraints,IoModel* iomodel){/*{{{*/
12 /*No constraints*/
13}/*}}}*/
14void SmbAnalysis::CreateLoads(Loads* loads, IoModel* iomodel){/*{{{*/
15 /*No loads*/
16}/*}}}*/
17void SmbAnalysis::CreateNodes(Nodes* nodes,IoModel* iomodel,bool isamr){/*{{{*/
18 ::CreateNodes(nodes,iomodel,SmbAnalysisEnum,P1Enum);
19}/*}}}*/
20int SmbAnalysis::DofsPerNode(int** doflist,int domaintype,int approximation){/*{{{*/
21 return 1;
22}/*}}}*/
23void SmbAnalysis::UpdateElements(Elements* elements,IoModel* iomodel,int analysis_counter,int analysis_type){/*{{{*/
24
25 int smb_model;
26 bool isdelta18o,ismungsm,isd18opd,issetpddfac,isprecipscaled,istemperaturescaled,isfirnwarming;
27
28 /*Update elements: */
29 int counter=0;
30 for(int i=0;i<iomodel->numberofelements;i++){
31 if(iomodel->my_elements[i]){
32 Element* element=(Element*)elements->GetObjectByOffset(counter);
33 element->Update(i,iomodel,analysis_counter,analysis_type,P1Enum);
34 counter++;
35 }
36 }
37
38 /*Figure out smb model: */
39 iomodel->FindConstant(&smb_model,"md.smb.model");
40 switch(smb_model){
41 case SMBforcingEnum:
42 iomodel->FetchDataToInput(elements,"md.smb.mass_balance",SmbMassBalanceEnum,0.);
43 break;
44 case SMBgembEnum:
45 iomodel->FetchDataToInput(elements,"md.smb.Ta",SmbTaEnum);
46 iomodel->FetchDataToInput(elements,"md.smb.V",SmbVEnum);
47 iomodel->FetchDataToInput(elements,"md.smb.dswrf",SmbDswrfEnum);
48 iomodel->FetchDataToInput(elements,"md.smb.dlwrf",SmbDlwrfEnum);
49 iomodel->FetchDataToInput(elements,"md.smb.P",SmbPEnum);
50 iomodel->FetchDataToInput(elements,"md.smb.eAir",SmbEAirEnum);
51 iomodel->FetchDataToInput(elements,"md.smb.pAir",SmbPAirEnum);
52 iomodel->FetchDataToInput(elements,"md.smb.zTop",SmbZTopEnum);
53 iomodel->FetchDataToInput(elements,"md.smb.dzTop",SmbDzTopEnum);
54 iomodel->FetchDataToInput(elements,"md.smb.dzMin",SmbDzMinEnum);
55 iomodel->FetchDataToInput(elements,"md.smb.zY",SmbZYEnum);
56 iomodel->FetchDataToInput(elements,"md.smb.zMax",SmbZMaxEnum);
57 iomodel->FetchDataToInput(elements,"md.smb.zMin",SmbZMinEnum);
58 iomodel->FetchDataToInput(elements,"md.smb.Tmean",SmbTmeanEnum);
59 iomodel->FetchDataToInput(elements,"md.smb.Vmean",SmbVmeanEnum);
60 iomodel->FetchDataToInput(elements,"md.smb.C",SmbCEnum);
61 iomodel->FetchDataToInput(elements,"md.smb.Tz",SmbTzEnum);
62 iomodel->FetchDataToInput(elements,"md.smb.Vz",SmbVzEnum);
63 InputUpdateFromConstantx(elements,0.,SmbIsInitializedEnum);
64 iomodel->FetchDataToInput(elements,"md.smb.Dzini",SmbDziniEnum);
65 iomodel->FetchDataToInput(elements,"md.smb.Dini",SmbDiniEnum);
66 iomodel->FetchDataToInput(elements,"md.smb.Reini",SmbReiniEnum);
67 iomodel->FetchDataToInput(elements,"md.smb.Gdnini",SmbGdniniEnum);
68 iomodel->FetchDataToInput(elements,"md.smb.Gspini",SmbGspiniEnum);
69 iomodel->FetchDataToInput(elements,"md.smb.ECini",SmbECiniEnum);
70 iomodel->FetchDataToInput(elements,"md.smb.Wini",SmbWiniEnum);
71 iomodel->FetchDataToInput(elements,"md.smb.Aini",SmbAiniEnum);
72 iomodel->FetchDataToInput(elements,"md.smb.Tini",SmbTiniEnum);
73 iomodel->FetchDataToInput(elements,"md.smb.Sizeini",SmbSizeiniEnum);
74 iomodel->FetchDataToInput(elements,"md.smb.aValue",SmbAValueEnum);
75 iomodel->FetchDataToInput(elements,"md.smb.teValue",SmbTeValueEnum);
76 break;
77 case SMBpddEnum:
78 iomodel->FindConstant(&isdelta18o,"md.smb.isdelta18o");
79 iomodel->FindConstant(&ismungsm,"md.smb.ismungsm");
80 iomodel->FetchDataToInput(elements,"md.thermal.spctemperature",ThermalSpctemperatureEnum);
81 iomodel->FetchDataToInput(elements,"md.smb.s0p",SmbS0pEnum);
82 iomodel->FetchDataToInput(elements,"md.smb.s0t",SmbS0tEnum);
83 if(isdelta18o || ismungsm){
84 iomodel->FetchDataToInput(elements,"md.smb.temperatures_lgm",SmbTemperaturesLgmEnum);
85 iomodel->FetchDataToInput(elements,"md.smb.temperatures_presentday",SmbTemperaturesPresentdayEnum);
86 iomodel->FetchDataToInput(elements,"md.smb.precipitations_presentday",SmbPrecipitationsPresentdayEnum);
87 iomodel->FetchDataToInput(elements,"md.smb.precipitations_lgm",SmbPrecipitationsLgmEnum);
88 }else{
89 iomodel->FetchDataToInput(elements,"md.smb.precipitation",SmbPrecipitationEnum);
90 iomodel->FetchDataToInput(elements,"md.smb.monthlytemperatures",SmbMonthlytemperaturesEnum);
91 }
92 break;
93 case SMBpddSicopolisEnum:
94 iomodel->FetchDataToInput(elements,"md.smb.s0p",SmbS0pEnum);
95 iomodel->FetchDataToInput(elements,"md.smb.s0t",SmbS0tEnum);
96 iomodel->FindConstant(&isfirnwarming,"md.smb.isfirnwarming");
97 iomodel->FetchDataToInput(elements,"md.smb.smb_corr",SmbSmbCorrEnum);
98 iomodel->FetchDataToInput(elements,"md.smb.precipitation",SmbPrecipitationEnum);
99 iomodel->FetchDataToInput(elements,"md.smb.monthlytemperatures",SmbMonthlytemperaturesEnum);
100 iomodel->FetchDataToInput(elements,"md.smb.precipitation_anomaly",SmbPrecipitationsAnomalyEnum);
101 iomodel->FetchDataToInput(elements,"md.smb.temperature_anomaly",SmbTemperaturesAnomalyEnum);
102 break;
103 case SMBd18opddEnum:
104 iomodel->FindConstant(&istemperaturescaled,"md.smb.istemperaturescaled");
105 iomodel->FindConstant(&isprecipscaled,"md.smb.isprecipscaled");
106 iomodel->FindConstant(&ismungsm,"md.smb.ismungsm");
107 iomodel->FindConstant(&isd18opd,"md.smb.isd18opd");
108 iomodel->FindConstant(&issetpddfac,"md.smb.issetpddfac");
109 iomodel->FetchDataToInput(elements,"md.thermal.spctemperature",ThermalSpctemperatureEnum);
110 iomodel->FetchDataToInput(elements,"md.smb.s0p",SmbS0pEnum);
111 iomodel->FetchDataToInput(elements,"md.smb.s0t",SmbS0tEnum);
112 if(isd18opd){
113 iomodel->FetchDataToInput(elements,"md.smb.temperatures_presentday",SmbTemperaturesPresentdayEnum);
114 iomodel->FetchDataToInput(elements,"md.smb.precipitations_presentday",SmbPrecipitationsPresentdayEnum);
115 if(!istemperaturescaled){
116 iomodel->FetchDataToInput(elements,"md.smb.temperatures_reconstructed",SmbTemperaturesReconstructedEnum);
117 }
118 if(!isprecipscaled){
119 iomodel->FetchDataToInput(elements,"md.smb.precipitations_reconstructed",SmbPrecipitationsReconstructedEnum);
120 }
121 }
122 if(issetpddfac){
123 iomodel->FetchDataToInput(elements,"md.smb.pddfac_snow",SmbPddfacSnowEnum,-1.);
124 iomodel->FetchDataToInput(elements,"md.smb.pddfac_ice",SmbPddfacIceEnum,-1.);
125 }
126 break;
127 case SMBgradientsEnum:
128 iomodel->FetchDataToInput(elements,"md.smb.href",SmbHrefEnum);
129 iomodel->FetchDataToInput(elements,"md.smb.smbref",SmbSmbrefEnum);
130 iomodel->FetchDataToInput(elements,"md.smb.b_pos",SmbBPosEnum);
131 iomodel->FetchDataToInput(elements,"md.smb.b_neg",SmbBNegEnum);
132 break;
133 case SMBgradientselaEnum:
134 iomodel->FetchDataToInput(elements,"md.smb.ela",SmbElaEnum);
135 iomodel->FetchDataToInput(elements,"md.smb.b_pos",SmbBPosEnum);
136 iomodel->FetchDataToInput(elements,"md.smb.b_neg",SmbBNegEnum);
137 iomodel->FetchDataToInput(elements,"md.smb.b_max",SmbBMaxEnum);
138 iomodel->FetchDataToInput(elements,"md.smb.b_min",SmbBMinEnum);
139 break;
140 case SMBhenningEnum:
141 iomodel->FetchDataToInput(elements,"md.smb.smbref",SmbSmbrefEnum,0.);
142 break;
143 case SMBcomponentsEnum:
144 iomodel->FetchDataToInput(elements,"md.smb.accumulation",SmbAccumulationEnum,0.);
145 iomodel->FetchDataToInput(elements,"md.smb.evaporation",SmbEvaporationEnum,0.);
146 iomodel->FetchDataToInput(elements,"md.smb.runoff",SmbRunoffEnum,0.);
147 break;
148 case SMBmeltcomponentsEnum:
149 iomodel->FetchDataToInput(elements,"md.smb.accumulation",SmbAccumulationEnum,0.);
150 iomodel->FetchDataToInput(elements,"md.smb.evaporation",SmbEvaporationEnum,0.);
151 iomodel->FetchDataToInput(elements,"md.smb.melt",SmbMeltEnum,0.);
152 iomodel->FetchDataToInput(elements,"md.smb.refreeze",SmbRefreezeEnum,0.);
153 break;
154 case SMBgradientscomponentsEnum:
155 iomodel->FetchDataToInput(elements,"md.smb.accualti",SmbAccualtiEnum);
156 iomodel->FetchDataToInput(elements,"md.smb.accugrad",SmbAccugradEnum);
157 iomodel->FetchDataToInput(elements,"md.smb.runoffalti",SmbRunoffaltiEnum);
158 iomodel->FetchDataToInput(elements,"md.smb.runoffgrad",SmbRunoffgradEnum);
159 break;
160 case SMBsemicEnum:
161 iomodel->FetchDataToInput(elements,"md.thermal.spctemperature",ThermalSpctemperatureEnum);
162 iomodel->FetchDataToInput(elements,"md.smb.s0gcm",SmbS0gcmEnum);
163 iomodel->FetchDataToInput(elements,"md.smb.dailysnowfall",SmbDailysnowfallEnum);
164 iomodel->FetchDataToInput(elements,"md.smb.dailyrainfall",SmbDailyrainfallEnum);
165 iomodel->FetchDataToInput(elements,"md.smb.dailydsradiation",SmbDailydsradiationEnum);
166 iomodel->FetchDataToInput(elements,"md.smb.dailydlradiation",SmbDailydlradiationEnum);
167 iomodel->FetchDataToInput(elements,"md.smb.dailywindspeed",SmbDailywindspeedEnum);
168 iomodel->FetchDataToInput(elements,"md.smb.dailypressure",SmbDailypressureEnum);
169 iomodel->FetchDataToInput(elements,"md.smb.dailyairdensity",SmbDailyairdensityEnum);
170 iomodel->FetchDataToInput(elements,"md.smb.dailyairhumidity",SmbDailyairhumidityEnum);
171 iomodel->FetchDataToInput(elements,"md.smb.dailytemperature",SmbDailytemperatureEnum);
172 break;
173 default:
174 _error_("Surface mass balance model "<<EnumToStringx(smb_model)<<" not supported yet");
175 }
176
177}/*}}}*/
178void SmbAnalysis::UpdateParameters(Parameters* parameters,IoModel* iomodel,int solution_enum,int analysis_enum){/*{{{*/
179
180 int numoutputs;
181 char** requestedoutputs = NULL;
182 bool isdelta18o,ismungsm,isd18opd,issetpddfac,interp,isfirnwarming;
183 int smb_model, smbslices;
184 IssmDouble *temp = NULL;
185 int N,M;
186
187 parameters->AddObject(iomodel->CopyConstantObject("md.smb.model",SmbEnum));
188
189 iomodel->FindConstant(&smb_model,"md.smb.model");
190 iomodel->FindConstant(&interp,"md.timestepping.interp_forcings");
191
192 iomodel->FetchData(&smbslices,"md.smb.steps_per_step");
193 parameters->AddObject(new IntParam(SmbStepsPerStepEnum,smbslices));
194
195 switch(smb_model){
196 case SMBforcingEnum:
197 parameters->AddObject(iomodel->CopyConstantObject("md.smb.isclimatology",SmbIsclimatologyEnum));
198 break;
199 case SMBgembEnum:
200 parameters->AddObject(iomodel->CopyConstantObject("md.smb.aIdx",SmbAIdxEnum));
201 parameters->AddObject(iomodel->CopyConstantObject("md.smb.swIdx",SmbSwIdxEnum));
202 parameters->AddObject(iomodel->CopyConstantObject("md.smb.denIdx",SmbDenIdxEnum));
203 parameters->AddObject(iomodel->CopyConstantObject("md.smb.dsnowIdx",SmbDsnowIdxEnum));
204 parameters->AddObject(iomodel->CopyConstantObject("md.smb.cldFrac",SmbCldFracEnum));
205 parameters->AddObject(iomodel->CopyConstantObject("md.smb.t0wet",SmbT0wetEnum));
206 parameters->AddObject(iomodel->CopyConstantObject("md.smb.t0dry",SmbT0dryEnum));
207 parameters->AddObject(iomodel->CopyConstantObject("md.smb.K",SmbKEnum));
208 parameters->AddObject(iomodel->CopyConstantObject("md.smb.aSnow",SmbASnowEnum));
209 parameters->AddObject(iomodel->CopyConstantObject("md.smb.aIce",SmbAIceEnum));
210 parameters->AddObject(iomodel->CopyConstantObject("md.smb.dt",SmbDtEnum));
211 parameters->AddObject(iomodel->CopyConstantObject("md.smb.isgraingrowth",SmbIsgraingrowthEnum));
212 parameters->AddObject(iomodel->CopyConstantObject("md.smb.isalbedo",SmbIsalbedoEnum));
213 parameters->AddObject(iomodel->CopyConstantObject("md.smb.isshortwave",SmbIsshortwaveEnum));
214 parameters->AddObject(iomodel->CopyConstantObject("md.smb.isthermal",SmbIsthermalEnum));
215 parameters->AddObject(iomodel->CopyConstantObject("md.smb.isaccumulation",SmbIsaccumulationEnum));
216 parameters->AddObject(iomodel->CopyConstantObject("md.smb.ismelt",SmbIsmeltEnum));
217 parameters->AddObject(iomodel->CopyConstantObject("md.smb.isdensification",SmbIsdensificationEnum));
218 parameters->AddObject(iomodel->CopyConstantObject("md.smb.isturbulentflux",SmbIsturbulentfluxEnum));
219 parameters->AddObject(iomodel->CopyConstantObject("md.smb.isclimatology",SmbIsclimatologyEnum));
220 parameters->AddObject(iomodel->CopyConstantObject("md.smb.InitDensityScaling",SmbInitDensityScalingEnum));
221 parameters->AddObject(iomodel->CopyConstantObject("md.smb.ThermoDeltaTScaling",SmbThermoDeltaTScalingEnum));
222 parameters->AddObject(iomodel->CopyConstantObject("md.smb.adThresh",SmbAdThreshEnum));
223 break;
224 case SMBpddEnum:
225 parameters->AddObject(iomodel->CopyConstantObject("md.smb.isdelta18o",SmbIsdelta18oEnum));
226 parameters->AddObject(iomodel->CopyConstantObject("md.smb.ismungsm",SmbIsmungsmEnum));
227 parameters->AddObject(iomodel->CopyConstantObject("md.smb.issetpddfac",SmbIssetpddfacEnum));
228 iomodel->FindConstant(&isdelta18o,"md.smb.isdelta18o");
229 iomodel->FindConstant(&ismungsm,"md.smb.ismungsm");
230
231 if(ismungsm){
232 iomodel->FetchData(&temp,&N,&M,"md.smb.Pfac"); _assert_(N==2);
233 parameters->AddObject(new TransientParam(SmbPfacEnum,&temp[0],&temp[M],interp,M));
234 iomodel->DeleteData(temp,"md.smb.Pfac");
235
236 iomodel->FetchData(&temp,&N,&M,"md.smb.Tdiff"); _assert_(N==2);
237 parameters->AddObject(new TransientParam(SmbTdiffEnum,&temp[0],&temp[M],interp,M));
238 iomodel->DeleteData(temp,"md.smb.Tdiff");
239
240 iomodel->FetchData(&temp,&N,&M,"md.smb.sealev"); _assert_(N==2);
241 parameters->AddObject(new TransientParam(SmbSealevEnum,&temp[0],&temp[M],interp,M));
242 iomodel->DeleteData(temp,"md.smb.sealev");
243 }
244 if(isdelta18o){
245 iomodel->FetchData(&temp,&N,&M,"md.smb.delta18o"); _assert_(N==2);
246 parameters->AddObject(new TransientParam(SmbDelta18oEnum,&temp[0],&temp[M],interp,M));
247 iomodel->DeleteData(temp,"md.smb.delta18o");
248
249 iomodel->FetchData(&temp,&N,&M,"md.smb.delta18o_surface"); _assert_(N==2);
250 parameters->AddObject(new TransientParam(SmbDelta18oSurfaceEnum,&temp[0],&temp[M],interp,M));
251 iomodel->DeleteData(temp,"md.smb.delta18o_surface");
252 }
253 break;
254 case SMBpddSicopolisEnum:
255 parameters->AddObject(iomodel->CopyConstantObject("md.smb.isfirnwarming",SmbIsfirnwarmingEnum));
256 break;
257 case SMBd18opddEnum:
258 parameters->AddObject(iomodel->CopyConstantObject("md.smb.ismungsm",SmbIsmungsmEnum));
259 parameters->AddObject(iomodel->CopyConstantObject("md.smb.isd18opd",SmbIsd18opdEnum));
260 parameters->AddObject(iomodel->CopyConstantObject("md.smb.issetpddfac",SmbIssetpddfacEnum));
261 iomodel->FindConstant(&ismungsm,"md.smb.ismungsm");
262 iomodel->FindConstant(&isd18opd,"md.smb.isd18opd");
263 iomodel->FindConstant(&issetpddfac,"md.smb.issetpddfac");
264 if(isd18opd){
265 parameters->AddObject(iomodel->CopyConstantObject("md.smb.f",SmbFEnum));
266 parameters->AddObject(iomodel->CopyConstantObject("md.smb.istemperaturescaled",SmbIstemperaturescaledEnum));
267 parameters->AddObject(iomodel->CopyConstantObject("md.smb.isprecipscaled",SmbIsprecipscaledEnum));
268 iomodel->FetchData(&temp,&N,&M,"md.smb.delta18o"); _assert_(N==2);
269 parameters->AddObject(new TransientParam(SmbDelta18oEnum,&temp[0],&temp[M],interp,M));
270 iomodel->DeleteData(temp,"md.smb.delta18o");
271 }
272 break;
273 case SMBgradientsEnum:
274 /*Nothing to add to parameters*/
275 break;
276 case SMBgradientselaEnum:
277 /*Nothing to add to parameters*/
278 break;
279 case SMBhenningEnum:
280 /*Nothing to add to parameters*/
281 break;
282 case SMBcomponentsEnum:
283 parameters->AddObject(iomodel->CopyConstantObject("md.smb.isclimatology",SmbIsclimatologyEnum));
284 break;
285 case SMBmeltcomponentsEnum:
286 parameters->AddObject(iomodel->CopyConstantObject("md.smb.isclimatology",SmbIsclimatologyEnum));
287 break;
288 case SMBgradientscomponentsEnum:
289 parameters->AddObject(iomodel->CopyConstantObject("md.smb.accualti",SmbAccualtiEnum));
290 parameters->AddObject(iomodel->CopyConstantObject("md.smb.accugrad",SmbAccugradEnum));
291 parameters->AddObject(iomodel->CopyConstantObject("md.smb.runoffalti",SmbRunoffaltiEnum));
292 parameters->AddObject(iomodel->CopyConstantObject("md.smb.runoffgrad",SmbRunoffgradEnum));
293
294 iomodel->FetchData(&temp,&N,&M,"md.smb.accuref"); _assert_(N==2);
295 parameters->AddObject(new TransientParam(SmbAccurefEnum,&temp[0],&temp[M],interp,M));
296 iomodel->DeleteData(temp,"md.smb.accuref");
297
298 iomodel->FetchData(&temp,&N,&M,"md.smb.runoffref"); _assert_(N==2);
299 parameters->AddObject(new TransientParam(SmbRunoffrefEnum,&temp[0],&temp[M],interp,M));
300 iomodel->DeleteData(temp,"md.smb.runoffref");
301 break;
302 case SMBsemicEnum:
303 /*Nothing to add to parameters*/
304 break;
305 default:
306 _error_("Surface mass balance model "<<EnumToStringx(smb_model)<<" not supported yet");
307 }
308
309 iomodel->FindConstant(&requestedoutputs,&numoutputs,"md.smb.requested_outputs");
310 parameters->AddObject(new IntParam(SmbNumRequestedOutputsEnum,numoutputs));
311 if(numoutputs)parameters->AddObject(new StringArrayParam(SmbRequestedOutputsEnum,requestedoutputs,numoutputs));
312 iomodel->DeleteData(&requestedoutputs,numoutputs,"md.smb.requested_outputs");
313
314}/*}}}*/
315
316/*Finite Element Analysis*/
317void SmbAnalysis::Core(FemModel* femmodel){/*{{{*/
318
319 int smb_model;
320
321 /*Figure out smb model: */
322 femmodel->parameters->FindParam(&smb_model,SmbEnum);
323
324 /*branch to correct module*/
325 switch(smb_model){
326 case SMBforcingEnum:
327 SmbForcingx(femmodel);
328 break;
329 case SMBgembEnum:
330 Gembx(femmodel);
331 break;
332 case SMBpddEnum:
333 bool isdelta18o,ismungsm;
334 femmodel->parameters->FindParam(&isdelta18o,SmbIsdelta18oEnum);
335 femmodel->parameters->FindParam(&ismungsm,SmbIsmungsmEnum);
336 if(isdelta18o){
337 if(VerboseSolution()) _printf0_(" call Delta18oParameterization module\n");
338 Delta18oParameterizationx(femmodel);
339 }
340 if(ismungsm){
341 if(VerboseSolution()) _printf0_(" call MungsmtpParameterization module\n");
342 MungsmtpParameterizationx(femmodel);
343 }
344 if(VerboseSolution()) _printf0_(" call positive degree day module\n");
345 PositiveDegreeDayx(femmodel);
346 break;
347 case SMBpddSicopolisEnum:
348 if(VerboseSolution()) _printf0_(" call SICOPOLIS positive degree day module\n");
349 PositiveDegreeDaySicopolisx(femmodel);
350 break;
351 case SMBd18opddEnum:
352 bool isd18opd;
353 femmodel->parameters->FindParam(&isd18opd,SmbIsd18opdEnum);
354 if(isd18opd){
355 if(VerboseSolution()) _printf0_(" call Delta18opdParameterization module\n");
356 Delta18opdParameterizationx(femmodel);
357 if(VerboseSolution()) _printf0_(" call positive degree day module\n");
358 PositiveDegreeDayx(femmodel);
359 }
360 break;
361 case SMBgradientsEnum:
362 if(VerboseSolution())_printf0_(" call smb gradients module\n");
363 SmbGradientsx(femmodel);
364 break;
365 case SMBgradientselaEnum:
366 if(VerboseSolution())_printf0_(" call smb gradients ela module\n");
367 SmbGradientsElax(femmodel);
368 break;
369 case SMBhenningEnum:
370 if(VerboseSolution())_printf0_(" call smb Henning module\n");
371 SmbHenningx(femmodel);
372 break;
373 case SMBcomponentsEnum:
374 if(VerboseSolution())_printf0_(" call smb Components module\n");
375 SmbComponentsx(femmodel);
376 break;
377 case SMBmeltcomponentsEnum:
378 if(VerboseSolution())_printf0_(" call smb Melt Components module\n");
379 SmbMeltComponentsx(femmodel);
380 break;
381 case SMBgcmEnum:
382 /*Nothing to be done*/
383 break;
384 case SMBgradientscomponentsEnum:
385 if(VerboseSolution())_printf0_(" call smb gradients components module\n");
386 SmbGradientsComponentsx(femmodel);
387 break;
388 case SMBsemicEnum:
389 #ifdef _HAVE_SEMIC_
390 if(VerboseSolution())_printf0_(" call smb SEMIC module\n");
391 SmbSemicx(femmodel);
392 #else
393 _error_("SEMIC not installed");
394 #endif //_HAVE_SEMIC_
395 break;
396 default:
397 _error_("Surface mass balance model "<<EnumToStringx(smb_model)<<" not supported yet");
398 }
399
400}/*}}}*/
401ElementVector* SmbAnalysis::CreateDVector(Element* element){/*{{{*/
402 _error_("not implemented");
403}/*}}}*/
404ElementMatrix* SmbAnalysis::CreateJacobianMatrix(Element* element){/*{{{*/
405_error_("Not implemented");
406}/*}}}*/
407ElementMatrix* SmbAnalysis::CreateKMatrix(Element* element){/*{{{*/
408 _error_("not implemented yet");
409}/*}}}*/
410ElementVector* SmbAnalysis::CreatePVector(Element* element){/*{{{*/
411_error_("not implemented yet");
412}/*}}}*/
413void SmbAnalysis::GetSolutionFromInputs(Vector<IssmDouble>* solution,Element* element){/*{{{*/
414 _error_("not implemented yet");
415}/*}}}*/
416void SmbAnalysis::GradientJ(Vector<IssmDouble>* gradient,Element* element,int control_type,int control_index){/*{{{*/
417 _error_("Not implemented yet");
418}/*}}}*/
419void SmbAnalysis::InputUpdateFromSolution(IssmDouble* solution,Element* element){/*{{{*/
420 _error_("not implemented yet");
421}/*}}}*/
422void SmbAnalysis::UpdateConstraints(FemModel* femmodel){/*{{{*/
423 /*Default, do nothing*/
424 return;
425}/*}}}*/
Note: See TracBrowser for help on using the repository browser.