Index: /proj/ice/larour/issm-uci-clean/trunk-jpl/awards =================================================================== --- /proj/ice/larour/issm-uci-clean/trunk-jpl/awards (revision 11025) +++ /proj/ice/larour/issm-uci-clean/trunk-jpl/awards (revision 11026) @@ -1,2 +0,0 @@ -beeping award -Matlab's beeps (for error messages) have been successfully desactivated by Mathieu, with the command "beep off". (Mathieu, December 10th 2010) Index: /proj/ice/larour/issm-uci-clean/trunk-jpl/tidbits =================================================================== --- /proj/ice/larour/issm-uci-clean/trunk-jpl/tidbits (revision 11025) +++ /proj/ice/larour/issm-uci-clean/trunk-jpl/tidbits (revision 11026) @@ -1,55 +0,0 @@ -There is no technological frontier. (Mathieu, May 5th 2009) - -Thierry? Non il est pas la. Son bureau est la ... (Mathieu, May 15th 2009) - -Le modeling, c'est comme la cuisine, il faut des bons ingredients. Nous on veut ouvrir un michelin 3 etoiles, pas un macdo. (Eric R, May 20th 2009) - -C'est bizarre, ces modeles 3d sont independants de la connectivite... c'est vraiment bizarre ce truc. Je la met a 15, a 50 ou a 500 et le temps de calcul reste le meme. -2 mois plus tard: on se rend compte que dans extrude.m on met md.connectivity=25; (Mathieu, June 9th 2009) - -ca existe pas morronitos! (Mathieu, June 10th 2009) - -tu fais tac tac tac tac, soit tu fais shift tac tac (a propos de 'ZZ' au lieu de ':wq')(Mathieu, June 18th 2009) - -Eric "quel hmin tu utilises? " Mathieu "Hmin? ben d'y a 2 semaines!" (Mathieu September 2009) - -"tu devrais mettre les spc dans le vertical" rep:"Mais il n'y en a pas de spc sur le vertical pour l'instant" (Helene September 23rd 2009) - -A propos de pairoptions "bon pour l'instant on voit pas trop la puissance mais ca viendra je pense..." (Mathieu October 6th 2009) - -Dimitris "Ala, when do you want to do your presentation? next week, the week after?" answer "let me give you a date in two weeks" -"but you know, it is a place to present unfinished work!" "I know, I will try to get my work unfinished then..." (Ala October 14th 2009) - -"Bande d'oRignot" (orignaux=moose) (Eric July 22d 2010) - -"Eric, ton article il faut le faire mousser" (Eric R March 28th 2011 pers com) - -"Mathieu, J'essaye de faire un print et ce ** de matlab veut pas printer: ->> printmodel('Article/figures/PigBamg','png','trim','on','resolution',resolution); ->> ??? Error using ==> print at 310 ->> Error using ==> render at 179 ->> Bad data returned by HARDCOPY. Not calling IMWRITE. -Mathieu: regarde resolution, c'est combien? -Eric: 9900 (NDLR: ca ne doit pas depasser 3 ou 4!)... ca ca fait une image de 500Go au moins, il a confondu avec la resolution du maillage" (Eric L April 12th 2011) - -"Bon, j'irais bien manger mes seigneurs. OK adios." Still no clue on what that means. (Mathieu, April 28th 2011). - -On appelle en fait recursivement les functions d'inputs. C'est simple, c'est beau, c'est bosch (Mathieu, June 2011). - -ISSM, - You can start to make a new working directory on your local machine, and - checkout from the new server. Here are the steps: - 1. Login to your working machine - 2. cd your_working_dir - 3. checkout - svn co https://issm-svn.jpl.nasa.gov:80/svn/issm/issm . - ......... - Thanks and have a good weekend, - George -Hi George, - At step 3, I got the error "checkout command not found". - Please advise. Thanks - -Daria -(Daria, November 19th 2011) - - Index: /proj/ice/larour/issm-uci-clean/trunk-jpl/contributors.txt =================================================================== --- /proj/ice/larour/issm-uci-clean/trunk-jpl/contributors.txt (revision 11025) +++ /proj/ice/larour/issm-uci-clean/trunk-jpl/contributors.txt (revision 11026) @@ -1,12 +0,0 @@ -We thank the following contributors for their help in making ISSM better! - -Robert Crippen, Jet Propulsion Laboratory. robbert.crippen@jpl.nasa.gov -HoleFiller routines to plug incomplete datasets. See HoleFiller module in src/m/matlab/utils - -Point Inclusion in Polygon Test (pnpoly.c used in Utils/Arguscontourtomesh/IsInPoly.c) -W. Randolph Franklin (WRF) -http://www.ecse.rpi.edu/Homepages/wrf/Research/Short_Notes/pnpoly.html - -DACE: A Matlab Kriging toolbox, Søren N.Lophaen, Hans Bruun Nielsen and Jacob -Søndergaard (Technical University of Denmark) -http://www2.imm.dtu.dk/~hbn/dace/ Index: /proj/ice/larour/issm-uci-clean/trunk-jpl/AUTHORS =================================================================== --- /proj/ice/larour/issm-uci-clean/trunk-jpl/AUTHORS (revision 11025) +++ /proj/ice/larour/issm-uci-clean/trunk-jpl/AUTHORS (revision 11026) @@ -7,7 +7,22 @@ Development manager: Eric Larour -Current developers: +Current core developers: * Eric Larour * Helene Seroussi * Mathieu Morlighem + + +Contributors: + We thank the following contributors for their help in making ISSM better! + + Robert Crippen, Jet Propulsion Laboratory. robbert.crippen@jpl.nasa.gov + HoleFiller routines to plug incomplete datasets. See HoleFiller module in src/m/matlab/utils + + Point Inclusion in Polygon Test (pnpoly.c used in Utils/Arguscontourtomesh/IsInPoly.c) + W. Randolph Franklin (WRF) + http://www.ecse.rpi.edu/Homepages/wrf/Research/Short_Notes/pnpoly.html + + DACE: A Matlab Kriging toolbox, Søren N.Lophaen, Hans Bruun Nielsen and Jacob + Søndergaard (Technical University of Denmark) + http://www2.imm.dtu.dk/~hbn/dace/ Index: /proj/ice/larour/issm-uci-clean/trunk-jpl/src/c/Container/Elements.cpp =================================================================== --- /proj/ice/larour/issm-uci-clean/trunk-jpl/src/c/Container/Elements.cpp (revision 11025) +++ /proj/ice/larour/issm-uci-clean/trunk-jpl/src/c/Container/Elements.cpp (revision 11026) @@ -186,6 +186,7 @@ parameters->FindParam(&numberofelements,MeshNumberofelementsEnum); if(!results_as_patches){ + /*No patch here, we prepare vectors*/ /*see what the first element of this partition has in stock (this is common to all partitions)*/ if(my_rank==0){ Index: /proj/ice/larour/issm-uci-clean/trunk-jpl/ChangeLog =================================================================== --- /proj/ice/larour/issm-uci-clean/trunk-jpl/ChangeLog (revision 11025) +++ /proj/ice/larour/issm-uci-clean/trunk-jpl/ChangeLog (revision 11026) @@ -1,2499 +1,3 @@ -2009-04-22 17:03 seroussi +Go to - * test/Verification/: test1_icesheet_noicefront/Front.exp, - test2_icesheet_icefront/Square.par, - test3_iceshelf_icefront/Square.par, - test4_icesheet_noicefront_3d/Front.exp, - test5_icesheet_icefront_3d/Square.par, - test6_iceshelf_icefront_3d/Square.par, - test7_penalties_iceshelf_3d/Square.par, - test8_icesheet_noicefront_stokes/Front.exp, - test9_icesheet_icefront_stokes/Square.par, - test10_iceshelf_icefront_stokes/Square.par, - test11_penalties_iceshelf_allmodels/Square.par, - test_cielo/Square.par: simplified Square.par in tests - -2009-04-22 16:00 seroussi - - * src/m/classes/@model/model.m: minor - -2009-04-22 11:56 jschierm - - * src/m/classes/public/displayqmu.m: Still trying to get displayqmu - right. - -2009-04-22 09:57 jschierm - - * src/m/classes/: @model/model.m, public/displayqmu.m: Slight - changes in model class for qmu defaults.. - -2009-04-22 09:26 morlighe - - * src/m/classes/public/: plugdata.m, plugvelocities.m: minor - -2009-04-22 07:46 seroussi - - * test/Verification/test5_icesheet_icefront_3d/: Square.par, - archive_melting.mat, archive_melting_transient.mat, - archive_pattyn.mat, archive_temperature.mat, - archive_temperature_transient.mat, archive_thickness.mat: new - archives for test5 with default parameters - -2009-04-22 07:24 seroussi - - * test/Verification/test9_icesheet_icefront_stokes/: - archive_melting.mat, archive_stokes.mat, archive_temperature.mat: - test9 updated archives with default parameters - -2009-04-21 17:03 morlighe - - * src/m/utils/BC/: SetIceSheetBC.m, SetIceShelfBC.m, - SetMarineIceSheetBC.m: Added 2 other BC creation routines - -2009-04-21 16:53 seroussi - - * test/Verification/test8_icesheet_noicefront_stokes/: - archive_melting.mat, archive_stokes.mat, archive_temperature.mat: - test8 updated archives with default parameters - -2009-04-21 16:50 seroussi - - * test/Verification/test7_penalties_iceshelf_3d/: - archive_melting.mat, archive_temperature.mat, - archive_velocity.mat: test7 updated archives with default - parameters - -2009-04-21 16:49 seroussi - - * test/Verification/test6_iceshelf_icefront_3d/: - archive_melting.mat, archive_melting_transient.mat, - archive_pattyn.mat, archive_temperature.mat, - archive_temperature_transient.mat, archive_thickness.mat: test6 - updated archives with default parameters - -2009-04-21 16:49 seroussi - - * test/Verification/test4_icesheet_noicefront_3d/: - archive_hutter.mat, archive_melting.mat, archive_pattyn.mat, - archive_temperature.mat: test4 updated archives with default - parameters - -2009-04-21 16:47 seroussi - - * test/Verification/test3_iceshelf_icefront/: archive_acc.mat, - archive_ice.mat, archive_macayeal.mat, archive_thickness.mat: - test3 archives with default parameters - -2009-04-21 16:45 seroussi - - * test/Verification/test3_iceshelf_icefront/Square.par: minor - -2009-04-21 16:18 morlighe - - * src/m/classes/public/plugvelocities.m: minor - -2009-04-21 16:11 seroussi - - * src/m/classes/public/ismodelselfconsistent.m: minor - -2009-04-21 16:09 morlighe - - * src/m/classes/public/parameterize.m: better error message - -2009-04-21 15:52 jschierm - - * src/m/classes/: @model/model.m, public/displayqmu.m: Elimination - of qmu parameters that will be contained within qmu_params - structure. - -2009-04-21 15:36 morlighe - - * src/m/classes/public/: plugdata.m, plugvelocities.m: Added 2 - useful routines to load data and plug them onto the model easily - (cf Eric Rignot's comments) - -2009-04-21 15:23 jschierm - - * src/m/solutions/dakota/: dakota_in_data.m, dakota_in_write.m, - dakota_m_write.m, setupdesign/QmuSetupDesign.m, - setupdesign/setupdrag.m, setupdesign/setupgravity.m, - setupdesign/setupheatcapacity.m, setupdesign/setuprhoice.m, - setupdesign/setuprhowater.m, setupdesign/setupriftsfriction.m, - setupdesign/setupthermalconductivity.m, - setupdesign/setupthickness.m, - updatefunctions/QmuUpdateFunctions.m, - updatefunctions/updatedrag.m, updatefunctions/updategravity.m, - updatefunctions/updateheatcapacity.m, - updatefunctions/updaterho_ice.m, - updatefunctions/updaterho_water.m, - updatefunctions/updateriftsfriction.m, - updatefunctions/updatethermalconductivity.m, - updatefunctions/updatethickness.m: Addition of varargin so that - ISSM can pass model and other data transparently through Dakota - scripts to QmuSetupDesign and QmuUpdateFunctions. - -2009-04-21 15:01 seroussi - - * src/m/classes/public/ismodelselfconsistent.m: minor typo - -2009-04-21 14:58 seroussi - - * test/Verification/test11_penalties_iceshelf_allmodels/: - Square.par, archive_melting.mat, archive_temperature.mat, - archive_velocity.mat: test11 archives + beginning of Square.par - -2009-04-21 14:58 seroussi - - * test/Verification/test10_iceshelf_icefront_stokes/: Square.par, - archive_melting.mat, archive_stokes.mat, archive_temperature.mat: - test10 archives + beginning of Square.par - -2009-04-21 14:56 seroussi - - * test/Verification/: test3_iceshelf_icefront/Square.par, - test5_icesheet_icefront_3d/Square.par, - test6_iceshelf_icefront_3d/Square.par, - test7_penalties_iceshelf_3d/Square.par, - test9_icesheet_icefront_stokes/Square.par: beginning of - Square.par - -2009-04-21 14:55 seroussi - - * test/Verification/test2_icesheet_icefront/: Square.par, - archive_acc.mat, archive_hutter.mat, archive_ice.mat, - archive_macayeal.mat, archive_thickness.mat: test2 archives + - beginning of Square.par - -2009-04-21 14:55 seroussi - - * test/Verification/test1_icesheet_noicefront/: archive_acc.mat, - archive_hutter.mat, archive_ice.mat, archive_macayeal.mat: test1 - archives - -2009-04-21 14:34 jschierm - - * src/m/solutions/dakota/: dakota_in_data.m, dakota_in_write.m, - dakota_m_write.m, setupdesign/QmuSetupDesign.m, - setupdesign/setupdrag.m, setupdesign/setupgravity.m, - setupdesign/setupheatcapacity.m, setupdesign/setuprhoice.m, - setupdesign/setuprhowater.m, setupdesign/setupriftsfriction.m, - setupdesign/setupthermalconductivity.m, - setupdesign/setupthickness.m, - updatefunctions/QmuUpdateFunctions.m, - updatefunctions/updatedrag.m, updatefunctions/updategravity.m, - updatefunctions/updateheatcapacity.m, - updatefunctions/updaterho_ice.m, - updatefunctions/updaterho_water.m, - updatefunctions/updateriftsfriction.m, - updatefunctions/updatethermalconductivity.m, - updatefunctions/updatethickness.m: Removal of model class so that - Dakota and ISSM scripts are independent. - -2009-04-21 14:06 morlighe - - * src/m/classes/public/ismodelselfconsistent.m: - Ismodelselfconsistent rewritten - -2009-04-21 13:37 seroussi - - * src/m/utils/UpdateArchive/updatearchive.m: to fit the new names - -2009-04-21 13:28 seroussi - - * test/Verification/: test1_icesheet_noicefront/Square.par, - test4_icesheet_noicefront_3d/Square.par, - test8_icesheet_noicefront_stokes/Square.par: cosmetics - -2009-04-21 12:27 morlighe - - * src/m/classes/public/parameterize.m: Fixed parameter file error - message - -2009-04-21 12:03 seroussi - - * test/Verification/test8_icesheet_noicefront_stokes/: Square.par, - runme.m: simplified Square.par for IceSheet test 8 - -2009-04-21 12:02 seroussi - - * test/Verification/test4_icesheet_noicefront_3d/: Square.par, - runme.m: simplified Sqaure.par for test4 - -2009-04-21 12:01 seroussi - - * test/Verification/test1_icesheet_noicefront/: Square.par, - runme.m: simplified Square.par test1 - -2009-04-21 11:54 seroussi - - * src/m/classes/public/ismodelselfconsistent.m: precised some - checks depending on solutiontype - -2009-04-21 11:53 seroussi - - * src/m/utils/BC/SetIceSheetBC.m: set melting and accumulation to - zeros if nothing specified - -2009-04-21 11:21 jschierm - - * src/m/classes/: @continuous_design/continuous_design.m, - @continuous_design/display.m, - @continuous_state/continuous_state.m, - @least_squares_term/least_squares_term.m, - @normal_uncertain/normal_uncertain.m, - @objective_function/objective_function.m, - @response_function/response_function.m, - @linear_equality_constraint/linear_equality_constraint.m, - @linear_inequality_constraint/linear_inequality_constraint.m, - @nonlinear_equality_constraint/nonlinear_equality_constraint.m, - @nonlinear_inequality_constraint/nonlinear_inequality_constraint.m: - Set defaults to Dakota values but filter them out before writing. - -2009-04-21 10:54 seroussi - - * src/m/classes/public/ismodelselfconsistent.m: optimized - ismodelselfconsistent depending on package, solutiontype - -2009-04-21 10:53 seroussi - - * src/m/utils/BC/SetIceSheetBC.m: new routine to create IceSheetBC - -2009-04-21 09:43 jschierm - - * src/m/utils/Array/allequal.m: Function to return empty array if - all array elements are equal to given value. - -2009-04-20 17:34 morlighe - - * src/m/classes/@model/model.m: Added some initial values in model - -2009-04-20 10:28 morlighe - - * src/m/classes/public/plot/plot_streamlines.m: minor - -2009-04-20 10:24 morlighe - - * src/m/classes/public/plot/: applyoptions.m, parse_options.m, - plot_streamlines.m, plotdoc.m: Added streamlines plot options, - still some bugs due to tsearch matlab function - -2009-04-20 09:57 seroussi - - * test/Validation/ISMIP/TestD/Square.par: minor typo - -2009-04-20 08:33 seroussi - - * src/m/classes/public/plot/plot_basaldrag.m: possibility of doing - sectionvalues on basal_drag - -2009-04-17 17:20 seroussi - - * src/m/classes/public/plot/plotdoc.m: added capability in doc - -2009-04-17 17:19 seroussi - - * src/m/classes/public/plot/plot_dealer.m: added basal_drag x or y - in plot - -2009-04-17 17:18 seroussi - - * src/m/classes/public/plot/plot_basaldrag.m: added x or y - component in basal_drag - -2009-04-17 16:20 jschierm - - * src/m/classes/: @model/model.m, public/displayqmu.m: Replacement - of comments that got clobbered in previous commit (oops). - -2009-04-17 16:13 jschierm - - * src/m/classes/: @model/model.m, public/displayqmu.m: Addition of - qmu_method and qmu_params to model class. - -2009-04-17 10:25 jschierm - - * src/m/solutions/dakota/: dakota_in_data.m, dakota_in_write.m: - Implementation of linear constraints. - -2009-04-17 10:20 jschierm - - * src/m/classes/@dakota_method/: dakota_method.m, display.m, - dmeth_params_write.m: Implementation of linear constraints. - -2009-04-17 09:27 jschierm - - * src/m/classes/: @continuous_design/continuous_design.m, - @continuous_state/continuous_state.m, - @least_squares_term/least_squares_term.m, - @linear_equality_constraint/linear_equality_constraint.m, - @linear_inequality_constraint/linear_inequality_constraint.m, - @nonlinear_equality_constraint/nonlinear_equality_constraint.m, - @nonlinear_inequality_constraint/nonlinear_inequality_constraint.m, - @normal_uncertain/normal_uncertain.m, - @objective_function/objective_function.m, - @response_function/response_function.m: Change of method names - from dvar_ and dresp_ to prop_ - -2009-04-16 14:46 morlighe - - * src/m/classes/public/plot/plot_tensor_principalaxis.m: better way - of plotting principal axis - -2009-04-16 12:12 morlighe - - * src/m/classes/public/plot/: plot_tensor_components.m, - plot_tensor_principal.m, plot_tensor_principalaxis.m: better way - to plot principal axis - -2009-04-16 12:06 seroussi - - * test/Validation/EISMINT/MassConservation/runme.m: minor (wrong - name) - -2009-04-16 12:05 seroussi - - * test/Validation/EISMINT/MassConservation/CrossLine.exp: minor - -2009-04-16 11:57 morlighe - - * src/m/solutions/ice/StrainRateCompute.m: minor - -2009-04-16 11:35 morlighe - - * src/m/classes/public/plot/plot_tensor_principalaxis.m: Fixed bug - in principal axis plots - -2009-04-16 11:08 morlighe - - * src/m/classes/public/plot/: parse_options.m, plot_quiver.m, - plot_quiver3.m, plot_quivervel.m, plot_tensor_principalaxis.m, - plotdoc.m: Added density option for quiver plots (Thanks Ala) - -2009-04-16 10:39 morlighe - - * doc/website/doc_html/about.html: Minor - -2009-04-16 08:56 seroussi - - * src/m/classes/public/plot/plotdoc.m: wrong name of option - -2009-04-16 07:19 morlighe - - * startup.m: status variable can be cleared (not needed in matlab - workspace) - -2009-04-16 07:16 morlighe - - * src/m/classes/public/reorder.m: added mesh reordering (to be used - right after md=mesh( - -2009-04-16 07:11 morlighe - - * src/m/classes/public/plot/plot_dealer.m: minor (avoid error - message) - -2009-04-15 16:33 morlighe - - * doc/website/doc_html/: about.html, documentation.html: minor - -2009-04-15 14:13 ala - - * src/m/solutions/ice/StrainRateCompute.m: 1/a in principalvalues - of stainrate - -2009-04-15 14:11 ala - - * src/m/classes/public/solve.m: corrected typo problem - -2009-04-15 07:30 morlighe - - * src/m/classes/public/plot/plot_contour.m: no error in contour if - no contour found - -2009-04-15 07:21 morlighe - - * src/m/solutions/macayeal/macayealcontrol.m: no plots if - md.plot=0, use drawnow instead of pause(1) - -2009-04-14 16:14 morlighe - - * test/Validation/ISMIP/: README, TestA/README: Minor - -2009-04-14 16:11 seroussi - - * test/Validation/ISMIP/: README, description.pdf, results.pdf, - TestA/Front.exp, TestA/README, TestA/Square.par, TestA/runme.m, - TestB/Front.exp, TestB/README, TestB/Square.par, TestB/runme.m, - TestC/Front.exp, TestC/README, TestC/Square.par, TestC/runme.m, - TestD/Front.exp, TestD/README, TestD/Square.par, TestD/runme.m, - TestE/Front.exp, TestE/README, TestE/Square.par, TestE/data.mat, - TestE/data.txt, TestE/runme.m: added ISMIP_HOM tests - -2009-04-10 13:32 morlighe - - * contributors.txt: added photo source - -2009-04-10 12:09 morlighe - - * src/m/utils/Exp/manipulation/mergeprofiles.m: initialize tips - just in case - -2009-04-10 12:05 morlighe - - * src/m/utils/Exp/manipulation/mergeprofiles.m: Fixed bug again... - -2009-04-10 11:43 morlighe - - * src/m/utils/Exp/manipulation/: cutarea.m, mergeprofiles.m, - removeseveralpoints.m: Fixed some bugs - -2009-04-10 10:52 morlighe - - * src/m/utils/Exp/expmaster.m: some bugs remaining - -2009-04-10 10:42 morlighe - - * src/m/utils/Exp/manipulation/: addendprofile.m, - addinsideprofile.m, closeprofile.m, cutarea.m, cutprofile.m, - mergeprofiles.m, modifyposition.m, removepoints.m, - removeprofile.m, removeseveralpoints.m: Minor - -2009-04-09 09:52 morlighe - - * test/Validation/EISMINT/: README, description_EISMINT.pdf, - shelf-descr.pdf, Diagnostic1/README, Diagnostic1/runme.m, - Diagnostic2/README, Diagnostic2/runme.m, MassConservation/README, - MassConservation/runme.m, Transient/README, Transient/runme.m: - Minor - -2009-04-09 09:40 seroussi - - * test/Validation/EISMINT/: README, shelf-descr.pdf, - Diagnostic1/DomainOutline.exp, Diagnostic1/Front.exp, - Diagnostic1/README, Diagnostic1/Square.par, Diagnostic1/runme.m, - Diagnostic2/DomainOutline.exp, Diagnostic2/Front.exp, - Diagnostic2/README, Diagnostic2/Square.par, Diagnostic2/runme.m, - MassConservation/CrossLine.exp, - MassConservation/DomainOutline.exp, MassConservation/Front.exp, - MassConservation/README, MassConservation/Square.par, - MassConservation/runme.m, Transient/DomainOutline.exp, - Transient/Front.exp, Transient/README, Transient/Square.par, - Transient/runme.m: Added EISMINT test for MacAyeal and - prognostic2d - -2009-04-09 07:50 morlighe - - * doc/website/doc_c/: createchtmldoc.sh, layoutissm.xml: minor - changes - -2009-04-09 07:37 morlighe - - * src/m/utils/Mesh/: meshmaker.m, squaremesh.m: Improved squaremesh - -2009-04-08 15:29 jschierm - - * src/m/classes/: @linear_inequality_constraint/display.m, - @linear_inequality_constraint/linear_inequality_constraint.m, - @linear_equality_constraint/display.m, - @linear_equality_constraint/linear_equality_constraint.m: - Addition of linear constraint classes. - -2009-04-08 14:55 morlighe - - * src/m/classes/public/plot/processdata.m: this way it is better - -2009-04-08 14:52 morlighe - - * src/m/classes/public/plot/processdata.m: not needed - -2009-04-08 14:49 morlighe - - * src/m/classes/public/plot/processdata.m: minor - -2009-04-08 14:23 seroussi - - * src/m/utils/Mesh/meshmaker.m: better comments - -2009-04-08 14:16 seroussi - - * src/m/utils/Mesh/meshmaker.m: added meshmaker for structerated - sqaure mesh - -2009-04-08 13:50 morlighe - - * doc/website/doc_html/: about.html: typo - -2009-04-08 13:35 morlighe - - * src/m/classes/public/plot/plot_elementstype.m: fixed - plot_elementstype when Stokes... Matlab crashes with alpha on - patches now... - -2009-04-08 11:55 jschierm - - * src/m/utils/Array/item2str.m: Addition of error checking. - -2009-04-08 11:51 morlighe - - * doc/website/doc_c/: createchtmldoc.sh, doxygen.config, - layoutissm.xml: Added issmlayout - -2009-04-08 11:32 jschierm - - * src/m/classes/@dakota_method/: dakota_method.m, - dmeth_params_write.m: Addition of method-independent parameters - to dakota_method class. - -2009-04-08 11:01 morlighe - - * doc/website/doc_c/createchtmldoc.sh: doxygen tabs are nicer - -2009-04-08 10:45 morlighe - - * doc/website/doc_html/faq.html: minor - -2009-04-08 10:09 morlighe - - * doc/website/doc_html/: about.html, style.css: minor - -2009-04-08 09:00 morlighe - - * src/m/utils/Exp/: expmaster.m, manipulation/addcontour.m: Added - addcontour - -2009-04-08 08:38 morlighe - - * src/m/utils/Exp/expmaster.m: Fixed expmaster: now much much - faster thanks to getframe - -2009-04-07 17:10 seroussi - - * src/m/: classes/public/isresultconsistent.m, - solutions/ice/ModelProcessorDiagnosticHoriz.m: generalised mpcs - for periodic boundary conditions - -2009-04-07 17:08 seroussi - - * src/m/classes/public/: SectionValues.m, plot/plot_section.m: - Fixed Section plot - -2009-04-07 16:53 morlighe - - * src/m/classes/public/plot/plot_section.m: test fix section plot - -2009-04-07 16:42 seroussi - - * src/m/classes/public/SectionValues.m: to be continued - -2009-04-07 16:39 morlighe - - * doc/index.html: Minor - -2009-04-07 16:07 morlighe - - * doc/website/doc_html/style.css: improved menu - -2009-04-07 15:48 morlighe - - * doc/: index.html, website/doc_html/about.html, - website/doc_html/documentation.html, - website/doc_html/download.html, website/doc_html/faq.html, - website/doc_html/features.html, - website/doc_html/installation.html, website/doc_html/style.css, - website/doc_html/wiki.html: Minor - -2009-04-07 15:07 jschierm - - * src/m/solutions/dakota/: dakota_in_data.m, dakota_in_write.m, - dakota_m_write.m: Implementation of parameters in dakota_method - class - -2009-04-07 14:45 jschierm - - * src/m/classes/@dakota_method/: dakota_method.m, display.m, - dmeth_params_merge.m, dmeth_params_write.m: Addition of - method-dependent parameters into dakota_method class. - -2009-04-07 14:33 morlighe - - * src/m/classes/public/thicknessevolution.m: Accelerated - thicnessevolution - -2009-04-07 14:30 morlighe - - * doc/website/doc_html/: download.html, style.css: Added download - webpage - -2009-04-07 14:17 seroussi - - * src/m/classes/public/plot/applyoptions.m: minor - -2009-04-07 14:04 seroussi - - * src/m/classes/public/plot/plot_penalties.m: isnan returned an - empty matrix instead of a boolean - -2009-04-07 13:59 seroussi - - * src/m/classes/public/plot/applyoptions.m: minor - -2009-04-07 13:21 morlighe - - * doc/index.html: minor - -2009-04-07 11:59 morlighe - - * doc/: index.html, website/doc_html/about.html, - website/doc_html/documentation.html, - website/doc_html/download.html, website/doc_html/faq.html, - website/doc_html/features.html, - website/doc_html/installation.html, website/doc_html/style.css, - website/doc_html/wiki.html: Added About us webpage - -2009-04-07 11:16 morlighe - - * doc/: index.html, website/doc_html/installation.html, - website/doc_html/style.css: completed installation page - -2009-04-07 10:49 seroussi - - * src/m/classes/public/extrude.m: dirichlet value (thickness) for - prognostic must be same on each layer - -2009-04-07 10:18 seroussi - - * src/m/classes/public/plot/: plot_contour.m, processdata.m: fixed - contour for 3d meshes (Thank you Mathieu) - -2009-04-07 10:03 seroussi - - * src/m/classes/public/plot/applyoptions.m: minor typo - -2009-04-07 09:16 morlighe - - * doc/: index.html, website/doc_html/about.html, - website/doc_html/at_work.gif, - website/doc_html/documentation.html, - website/doc_html/download.html, website/doc_html/faq.html, - website/doc_html/features.html, - website/doc_html/installation.html, website/doc_html/wiki.html: - prepared some webpages - -2009-04-07 08:38 morlighe - - * src/m/classes/public/plot/: applyoptions.m, parse_options.m, - plot_basaldrag.m, plot_boundaries.m, plot_dealer.m, - plot_drivingstress.m, plot_elementnumbering.m, plot_quivervel.m, - plot_section.m, plot_tensor_components.m, - plot_tensor_principal.m, plot_tensor_principalaxis.m, - plot_transient_movie.m, plot_unit.m, plotmodel.m, processdata.m: - Split plot_unit into plot_dealer and plot_unit to be used by - other special plots. Example: plot_tensor_comp 300 lines -> 79 - lines - -2009-04-07 08:28 seroussi - - * test/Validation/RoundIceSheet/: runme.m, Circ.par: to match - current version of the code - -2009-04-06 15:04 seroussi - - * src/m/solutions/ice/ModelProcessorPrognostic.m: added dirichlet - values for prognostic - -2009-04-06 14:47 jschierm - - * src/m/solutions/dakota/qmu.m: Commented-out MPI statement. - -2009-04-06 14:44 jschierm - - * src/m/solutions/dakota/dakota_in_write.m: Add the rest of the - Dakota methods. - -2009-04-06 14:40 jschierm - - * src/m/solutions/dakota/: dakota_in_data.m, dakota_in_params.m, - dakota_in_write.m, dakota_m_write.m: Implement dakota_method - class and add parametric study methods. - -2009-04-06 11:55 jschierm - - * src/m/solutions/dakota/dakota_in_write.m: Removed find_string.m - to separate utility. - -2009-04-06 11:54 jschierm - - * src/m/solutions/dakota/dakota_in_parse.m: Parse optimization - responses from Dakota .in file. - -2009-04-06 11:52 jschierm - - * src/m/solutions/dakota/dakota_in_write.m: Output response levels - only for nondeterministic methods. - -2009-04-06 11:43 jschierm - - * src/m/solutions/dakota/setupdesign/: QmuSetupDesign.m, - setuprhowater.m, setupgravity.m, setupheatcapacity.m, - setupthermalconductivity.m: Add - rho_water,heat_capacity,thermal_conductivity,and gravity to - setupdesign. - -2009-04-06 11:36 jschierm - - * src/m/classes/@dakota_method/: dakota_method.m, display.m: - Implement dakota_method class to externalize methods for Dakota. - -2009-04-06 11:23 jschierm - - * src/m/utils/Array/any2str.m: Utility to convert anything to a - string. - -2009-04-06 11:21 jschierm - - * src/m/utils/Array/find_string.m: Utility to find a string in a - cell array (from dakota_in_write.m). - -2009-04-06 11:20 jschierm - - * src/m/utils/Array/: item2str.m, string_cell.m, string_vec.m: More - (and revised) utilities for displaying arrays. - -2009-04-06 10:29 morlighe - - * src/m/solutions/dakota/: cielo_ice_script.sh, dakota_in_data.m, - dakota_in_params.m, dakota_in_parse.m, dakota_in_write.m, - dakota_m_write.m, dakota_out_parse.m, plot_boxplot.m, - plot_hist_norm.m, plot_if_bars.m, plot_normdist_bars.m, - plot_normplot.m, plot_prob_bars.m, plot_rlev_bars.m, - plot_sampdist_bars.m, qmu.m, qmuname.m, - responsefunctions/MaxAbsVx.m, responsefunctions/MaxAbsVy.m, - responsefunctions/MaxVel.m, responsefunctions/MaxVx.m, - responsefunctions/MaxVy.m, responsefunctions/MinVel.m, - responsefunctions/MinVx.m, responsefunctions/MinVy.m, - responsefunctions/QmuResponseValue.m, - setupdesign/QmuSetupDesign.m, setupdesign/setupdrag.m, - setupdesign/setuprhoice.m, setupdesign/setupriftsfriction.m, - setupdesign/setupthickness.m, - updatefunctions/QmuUpdateFunctions.m, - updatefunctions/updatedrag.m, updatefunctions/updategravity.m, - updatefunctions/updateheatcapacity.m, - updatefunctions/updaterho_ice.m, - updatefunctions/updaterho_water.m, - updatefunctions/updateriftsfriction.m, - updatefunctions/updatethermalconductivity.m, - updatefunctions/updatethickness.m: readded dakota - -2009-04-06 08:40 morlighe - - * doc/website/: doc_c/doxygenissm.css, doc_c/doxygenissm.css.bak, - doc_c/headerissm.html, doc_c/tabsissm.css, doc_html/style.css, - doc_m/template_issm/m2html.css: improved geneal layout (doc_c) - -2009-04-03 17:40 seroussi - - * src/m/classes/public/plot/plot_transient_movie.m: model neede in - apply_options - -2009-04-03 17:38 morlighe - - * doc/website/doc_m/template_issm/master.tpl: better master index - -2009-04-03 17:31 seroussi - - * src/m/utils/Nightly/nightlyrun.m: minor - -2009-04-03 17:29 morlighe - - * doc/website/doc_m/creatematlabhtmldoc.sh: Minor - -2009-04-03 17:20 morlighe - - * doc/website/: Makefile, doc_c/createchtmldoc.sh, - doc_c/doxygen.config, doc_c/doxygenissm.css, - doc_c/doxygenissm.css.bak, doc_c/footerissm.html, - doc_c/headerissm.html, doc_c/headerissm.png, doc_c/logo_JPL.png, - doc_c/logo_NASA.png, doc_c/tabsissm.css, - doc_html/documentation.html, doc_html/headerissm.png, - doc_html/logo_JPL.png, doc_html/logo_NASA.png, - doc_html/style.css, doc_m/creatematlabhtmldoc.sh, - doc_m/template_issm/alpha.png, doc_m/template_issm/c++.png, - doc_m/template_issm/c.png, doc_m/template_issm/demoicon.gif, - doc_m/template_issm/down.png, doc_m/template_issm/fortran.png, - doc_m/template_issm/graph.tpl, - doc_m/template_issm/headerissm.png, doc_m/template_issm/hp.png, - doc_m/template_issm/left.png, doc_m/template_issm/linux.png, - doc_m/template_issm/logo_JPL.png, - doc_m/template_issm/logo_NASA.png, - doc_m/template_issm/m2html.css, doc_m/template_issm/master.tpl, - doc_m/template_issm/matlabicon.gif, doc_m/template_issm/mdir.tpl, - doc_m/template_issm/mex.png, doc_m/template_issm/mfile.tpl, - doc_m/template_issm/right.png, doc_m/template_issm/sgi.png, - doc_m/template_issm/simulinkicon.gif, - doc_m/template_issm/solaris.png, doc_m/template_issm/todo.tpl, - doc_m/template_issm/up.png, doc_m/template_issm/windows.png, - doc_m/template_issm/template_issm2/alpha.png, - doc_m/template_issm/template_issm2/c++.png, - doc_m/template_issm/template_issm2/c.png, - doc_m/template_issm/template_issm2/demoicon.gif, - doc_m/template_issm/template_issm2/down.png, - doc_m/template_issm/template_issm2/fortran.png, - doc_m/template_issm/template_issm2/graph.tpl, - doc_m/template_issm/template_issm2/headerissm.png, - doc_m/template_issm/template_issm2/hp.png, - doc_m/template_issm/template_issm2/left.png, - doc_m/template_issm/template_issm2/linux.png, - doc_m/template_issm/template_issm2/logo_JPL.png, - doc_m/template_issm/template_issm2/logo_NASA.png, - doc_m/template_issm/template_issm2/m2html.css, - doc_m/template_issm/template_issm2/master.tpl, - doc_m/template_issm/template_issm2/matlabicon.gif, - doc_m/template_issm/template_issm2/mdir.tpl, - doc_m/template_issm/template_issm2/mex.png, - doc_m/template_issm/template_issm2/mfile.tpl, - doc_m/template_issm/template_issm2/right.png, - doc_m/template_issm/template_issm2/sgi.png, - doc_m/template_issm/template_issm2/simulinkicon.gif, - doc_m/template_issm/template_issm2/solaris.png, - doc_m/template_issm/template_issm2/todo.tpl, - doc_m/template_issm/template_issm2/up.png, - doc_m/template_issm/template_issm2/windows.png: Added website - -2009-04-03 17:18 morlighe - - * doc/developperguide.pdf: no more developerguide - -2009-04-03 17:10 morlighe - - * scripts/: archive.sh, createlinks.sh, eraselinks.sh, - quickinstall.sh: Added some files - -2009-04-03 17:08 morlighe - - * doc/index.html: Better documentation setup - -2009-04-03 17:07 morlighe - - * doc/MakefileIce: Missing doc target - -2009-04-03 17:05 morlighe - - * cron/linux_cronfile: New locations for cron jobs - -2009-04-03 17:04 morlighe - - * etc/cielo.rc: New cielo.rc settings. - -2009-04-03 17:04 morlighe - - * packages/list: Useless - -2009-04-03 17:01 morlighe - - * MakefileIce, bin/MakefileIce, bin/cvs_empty_file: Added bin clean - target - -2009-04-03 16:59 morlighe - - * src/mex/MeshPartition/MeshPartition.c: Switched to x code - framework - -2009-04-03 16:56 morlighe - - * src/c/MeshPartitionx/: MeshPartition.h, MeshPartitionx.c, - MeshPartitionx.h: MeshPartitionx: completed the x framework. - Some left over from Cielo. - -2009-04-03 16:54 morlighe - - * src/c/: ArgusContourToMeshx/MakefileIce, HoleFillerx/MakefileIce, - IceDataInterpx/MakefileIce, MeshPartitionx/MakefileIce, - Visux/MakefileIce: Fixed Bug - -2009-04-03 16:51 morlighe - - * ChangeLogIce: change log for Ice - -2009-04-03 16:49 morlighe - - * src/mex/ArgusContourToMesh/ArgusContourToMesh.c: reorg - -2009-04-03 16:45 morlighe - - * etc/environment.sh, etc/environment_variables, - src/c/ArgusContourToMeshx/ArgusContourToMeshx.c, - src/c/ArgusContourToMeshx/Contour.c, - src/c/ArgusContourToMeshx/Contour.h: reorg - -2009-04-03 16:44 morlighe - - * INSTALL, INSTALLICE: moved INSTALL to INSTALLICE - -2009-04-03 16:43 morlighe - - * README, READMEICE: moved REDME to READMEICE - -2009-04-03 16:42 morlighe - - * src/c/ArgusContourToMeshx/: ArgusContourToMesh.h, - ArgusContourToMeshx.h: reorg - -2009-04-03 16:40 morlighe - - * doc/Makefile, src/c/ArgusContourToMeshx/Makefile, - src/c/HoleFillerx/Makefile, src/c/IceDataInterpx/Makefile, - src/c/MeshPartitionx/Makefile, src/c/Visux/Makefile, - src/c/shared/TriMesh/Makefile: not needed anymore, automatically - generated by autoconf - -2009-04-03 16:36 morlighe - - * examples/Bumps/Bump1_surface_bed/DomainOutline.exp, - examples/Bumps/Bump1_surface_bed/Front.exp, - examples/Bumps/Bump1_surface_bed/Square.par, - examples/Bumps/Bump1_surface_bed/runme.m, - examples/Bumps/Bump2_bed/DomainOutline.exp, - examples/Bumps/Bump2_bed/Front.exp, - examples/Bumps/Bump2_bed/Square.par, - examples/Bumps/Bump2_bed/runme.m, - examples/SquareIceShelf/DomainOutline.exp, - examples/SquareIceShelf/Front.exp, - examples/SquareIceShelf/README, - examples/SquareIceShelf/Shelf.exp, - examples/SquareIceShelf/Square.par, - examples/SquareIceShelf/square.model, - test/Validation/MacAyealVsPattyn/test1_iceshelf/DomainOutline.exp, - test/Validation/MacAyealVsPattyn/test1_iceshelf/Front.exp, - test/Validation/MacAyealVsPattyn/test1_iceshelf/Pattyn.exp, - test/Validation/MacAyealVsPattyn/test1_iceshelf/Shelf.exp, - test/Validation/MacAyealVsPattyn/test1_iceshelf/Square.par, - test/Validation/MacAyealVsPattyn/test1_iceshelf/runme.m, - test/Validation/MacAyealVsPattyn/test2_icesheet/DomainOutline.exp, - test/Validation/MacAyealVsPattyn/test2_icesheet/Front.exp, - test/Validation/MacAyealVsPattyn/test2_icesheet/Pattyn.exp, - test/Validation/MacAyealVsPattyn/test2_icesheet/Square.par, - test/Validation/MacAyealVsPattyn/test2_icesheet/runme.m, - test/Validation/MacAyealVsPattyn/test3_icesheet_iceshelf/DomainOutline.exp, - test/Validation/MacAyealVsPattyn/test3_icesheet_iceshelf/Front.exp, - test/Validation/MacAyealVsPattyn/test3_icesheet_iceshelf/Pattyn.exp, - test/Validation/MacAyealVsPattyn/test3_icesheet_iceshelf/Shelf.exp, - test/Validation/MacAyealVsPattyn/test3_icesheet_iceshelf/Square.par, - test/Validation/MacAyealVsPattyn/test3_icesheet_iceshelf/runme.m, - test/Validation/PattynStokes/test1_iceshelf/DomainOutline.exp, - test/Validation/PattynStokes/test1_iceshelf/Front.exp, - test/Validation/PattynStokes/test1_iceshelf/Shelf.exp, - test/Validation/PattynStokes/test1_iceshelf/Square.par, - test/Validation/PattynStokes/test1_iceshelf/runme.m, - test/Validation/PattynStokes/test2_icesheet/DomainOutline.exp, - test/Validation/PattynStokes/test2_icesheet/Front.exp, - test/Validation/PattynStokes/test2_icesheet/Square.par, - test/Validation/PattynStokes/test2_icesheet/runme.m, - test/Validation/PattynStokes/test3_icesheet_iceshelf/DomainOutline.exp, - test/Validation/PattynStokes/test3_icesheet_iceshelf/Front.exp, - test/Validation/PattynStokes/test3_icesheet_iceshelf/Shelf.exp, - test/Validation/PattynStokes/test3_icesheet_iceshelf/Square.par, - test/Validation/PattynStokes/test3_icesheet_iceshelf/runme.m, - test/Validation/RoundIceSheet/Circ.par, - test/Validation/RoundIceSheet/CreateDomainOutline.m, - test/Validation/RoundIceSheet/README, - test/Validation/RoundIceSheet/runme.m, - test/Validation/ThermalTests/Melting/DomainOutline.exp, - test/Validation/ThermalTests/Melting/Front.exp, - test/Validation/ThermalTests/Melting/Square.par, - test/Validation/ThermalTests/Melting/runme.m, - test/Validation/ThermalTests/Melting/thermalboundarycondition.m, - test/Validation/ThermalTests/Simpleadvection/DomainOutline.exp, - test/Validation/ThermalTests/Simpleadvection/Front.exp, - test/Validation/ThermalTests/Simpleadvection/Square.par, - test/Validation/ThermalTests/Simpleadvection/runme.m, - test/Validation/ThermalTests/Simpleadvection/thermalboundarycondition.m, - test/Validation/ThermalTests/Simpleconduction/DomainOutline.exp, - test/Validation/ThermalTests/Simpleconduction/Front.exp, - test/Validation/ThermalTests/Simpleconduction/Shelf.exp, - test/Validation/ThermalTests/Simpleconduction/Square.par, - test/Validation/ThermalTests/Simpleconduction/runme.m, - test/Validation/ThermalTests/Simpleconduction/thermalboundarycondition.m, - test/Validation/ThermalTests/Simplegeothermalflux/DomainOutline.exp, - test/Validation/ThermalTests/Simplegeothermalflux/Front.exp, - test/Validation/ThermalTests/Simplegeothermalflux/Square.par, - test/Validation/ThermalTests/Simplegeothermalflux/runme.m, - test/Validation/ThermalTests/Simplegeothermalflux/thermalboundarycondition.m, - test/Verification/test10_iceshelf_icefront_stokes/DomainOutline.exp, - test/Verification/test10_iceshelf_icefront_stokes/Front.exp, - test/Verification/test10_iceshelf_icefront_stokes/Square.par, - test/Verification/test10_iceshelf_icefront_stokes/archive_melting.mat, - test/Verification/test10_iceshelf_icefront_stokes/archive_stokes.mat, - test/Verification/test10_iceshelf_icefront_stokes/archive_temperature.mat, - test/Verification/test10_iceshelf_icefront_stokes/runme.m, - test/Verification/test10_iceshelf_icefront_stokes/updatearchive.m, - test/Verification/test11_penalties_iceshelf_allmodels/DomainOutline.exp, - test/Verification/test11_penalties_iceshelf_allmodels/Front.exp, - test/Verification/test11_penalties_iceshelf_allmodels/Pattyn.exp, - test/Verification/test11_penalties_iceshelf_allmodels/Square.par, - test/Verification/test11_penalties_iceshelf_allmodels/Stokes.exp, - test/Verification/test11_penalties_iceshelf_allmodels/archive_melting.mat, - test/Verification/test11_penalties_iceshelf_allmodels/archive_temperature.mat, - test/Verification/test11_penalties_iceshelf_allmodels/archive_velocity.mat, - test/Verification/test11_penalties_iceshelf_allmodels/runme.m, - test/Verification/test11_penalties_iceshelf_allmodels/updatearchive.m, - test/Verification/test1_icesheet_noicefront/DomainOutline.exp, - test/Verification/test1_icesheet_noicefront/Front.exp, - test/Verification/test1_icesheet_noicefront/Square.par, - test/Verification/test1_icesheet_noicefront/archive_acc.mat, - test/Verification/test1_icesheet_noicefront/archive_hutter.mat, - test/Verification/test1_icesheet_noicefront/archive_ice.mat, - test/Verification/test1_icesheet_noicefront/archive_macayeal.mat, - test/Verification/test1_icesheet_noicefront/runme.m, - test/Verification/test1_icesheet_noicefront/updatearchive.m, - test/Verification/test2_icesheet_icefront/DomainOutline.exp, - test/Verification/test2_icesheet_icefront/Front.exp, - test/Verification/test2_icesheet_icefront/Hutter.exp, - test/Verification/test2_icesheet_icefront/Square.par, - test/Verification/test2_icesheet_icefront/archive_acc.mat, - test/Verification/test2_icesheet_icefront/archive_hutter.mat, - test/Verification/test2_icesheet_icefront/archive_ice.mat, - test/Verification/test2_icesheet_icefront/archive_macayeal.mat, - test/Verification/test2_icesheet_icefront/archive_thickness.mat, - test/Verification/test2_icesheet_icefront/runme.m, - test/Verification/test2_icesheet_icefront/updatearchive.m, - test/Verification/test3_iceshelf_icefront/DomainOutline.exp, - test/Verification/test3_iceshelf_icefront/Front.exp, - test/Verification/test3_iceshelf_icefront/Square.par, - test/Verification/test3_iceshelf_icefront/archive_acc.mat, - test/Verification/test3_iceshelf_icefront/archive_ice.mat, - test/Verification/test3_iceshelf_icefront/archive_macayeal.mat, - test/Verification/test3_iceshelf_icefront/archive_thickness.mat, - test/Verification/test3_iceshelf_icefront/runme.m, - test/Verification/test3_iceshelf_icefront/updatearchive.m, - test/Verification/test4_icesheet_noicefront_3d/DomainOutline.exp, - test/Verification/test4_icesheet_noicefront_3d/Front.exp, - test/Verification/test4_icesheet_noicefront_3d/Square.par, - test/Verification/test4_icesheet_noicefront_3d/archive_hutter.mat, - test/Verification/test4_icesheet_noicefront_3d/archive_melting.mat, - test/Verification/test4_icesheet_noicefront_3d/archive_pattyn.mat, - test/Verification/test4_icesheet_noicefront_3d/archive_temperature.mat, - test/Verification/test4_icesheet_noicefront_3d/runme.m, - test/Verification/test4_icesheet_noicefront_3d/updatearchive.m, - test/Verification/test5_icesheet_icefront_3d/DomainOutline.exp, - test/Verification/test5_icesheet_icefront_3d/Front.exp, - test/Verification/test5_icesheet_icefront_3d/Square.par, - test/Verification/test5_icesheet_icefront_3d/archive_melting.mat, - test/Verification/test5_icesheet_icefront_3d/archive_melting_transient.mat, - test/Verification/test5_icesheet_icefront_3d/archive_pattyn.mat, - test/Verification/test5_icesheet_icefront_3d/archive_temperature.mat, - test/Verification/test5_icesheet_icefront_3d/archive_temperature_transient.mat, - test/Verification/test5_icesheet_icefront_3d/archive_thickness.mat, - test/Verification/test5_icesheet_icefront_3d/runme.m, - test/Verification/test5_icesheet_icefront_3d/updatearchive.m, - test/Verification/test6_iceshelf_icefront_3d/DomainOutline.exp, - test/Verification/test6_iceshelf_icefront_3d/Front.exp, - test/Verification/test6_iceshelf_icefront_3d/Square.par, - test/Verification/test6_iceshelf_icefront_3d/archive_melting.mat, - test/Verification/test6_iceshelf_icefront_3d/archive_melting_transient.mat, - test/Verification/test6_iceshelf_icefront_3d/archive_pattyn.mat, - test/Verification/test6_iceshelf_icefront_3d/archive_temperature.mat, - test/Verification/test6_iceshelf_icefront_3d/archive_temperature_transient.mat, - test/Verification/test6_iceshelf_icefront_3d/archive_thickness.mat, - test/Verification/test6_iceshelf_icefront_3d/runme.m, - test/Verification/test6_iceshelf_icefront_3d/updatearchive.m, - test/Verification/test7_penalties_iceshelf_3d/DomainOutline.exp, - test/Verification/test7_penalties_iceshelf_3d/Front.exp, - test/Verification/test7_penalties_iceshelf_3d/Pattyn.exp, - test/Verification/test7_penalties_iceshelf_3d/Square.par, - test/Verification/test7_penalties_iceshelf_3d/archive_melting.mat, - test/Verification/test7_penalties_iceshelf_3d/archive_temperature.mat, - test/Verification/test7_penalties_iceshelf_3d/archive_velocity.mat, - test/Verification/test7_penalties_iceshelf_3d/iceshelf.exp, - test/Verification/test7_penalties_iceshelf_3d/runme.m, - test/Verification/test7_penalties_iceshelf_3d/updatearchive.m, - test/Verification/test8_icesheet_noicefront_stokes/DomainOutline.exp, - test/Verification/test8_icesheet_noicefront_stokes/Front.exp, - test/Verification/test8_icesheet_noicefront_stokes/Square.par, - test/Verification/test8_icesheet_noicefront_stokes/archive_melting.mat, - test/Verification/test8_icesheet_noicefront_stokes/archive_stokes.mat, - test/Verification/test8_icesheet_noicefront_stokes/archive_temperature.mat, - test/Verification/test8_icesheet_noicefront_stokes/runme.m, - test/Verification/test8_icesheet_noicefront_stokes/updatearchive.m, - test/Verification/test9_icesheet_icefront_stokes/DomainOutline.exp, - test/Verification/test9_icesheet_icefront_stokes/Front.exp, - test/Verification/test9_icesheet_icefront_stokes/Square.par, - test/Verification/test9_icesheet_icefront_stokes/archive_melting.mat, - test/Verification/test9_icesheet_icefront_stokes/archive_stokes.mat, - test/Verification/test9_icesheet_icefront_stokes/archive_temperature.mat, - test/Verification/test9_icesheet_icefront_stokes/runme.m, - test/Verification/test9_icesheet_icefront_stokes/updatearchive.m, - test/Verification/test_cielo/DomainOutline.exp, - test/Verification/test_cielo/DomainOutlineRifts.exp, - test/Verification/test_cielo/Front.exp, - test/Verification/test_cielo/IceShelf.exp, - test/Verification/test_cielo/Pattyn.exp, - test/Verification/test_cielo/Rifts.exp, - test/Verification/test_cielo/Square.par, - test/Verification/test_cielo/control.mat, - test/Verification/test_cielo/diagnostic_horiz_macayeal.mat, - test/Verification/test_cielo/diagnostic_horiz_mixed.mat, - test/Verification/test_cielo/diagnostic_horiz_pattyn.mat, - test/Verification/test_cielo/diagnostic_horiz_rifts.mat, - test/Verification/test_cielo/runme.m, - test/Verification/test_cielo/thermalsteady.mat: Moved tests to - test and examples - -2009-04-03 16:27 morlighe - - * packages/: Makefile, README, list, dakota/Dakota_4_2.src.tar.gz, - dakota/install.sh, doxygen/doxygen-1.5.8.src.tar.gz, - doxygen/install.sh, gdal/GDALmake.opt.patch, - gdal/gdal-1.6.0.tar.gz, gdal/install.sh, m2html/install.sh, - m2html/m2html.m.patch, m2html/m2html.zip, - metis/Makefile.in.patch, metis/install.sh, - metis/metis-4.0.tar.gz, mpich2/Examples.Makefile.patch, - mpich2/install.sh, mpich2/mpich2-1.0.2p1.tar.gz, mtoc/install.sh, - mtoc/mtoc.tgz, petsc/install.sh, petsc/petsc-2.3.2-p3.tar.gz, - qhull/install.sh, qhull/qhull-2003.1.tar.gz, slepc/install.sh, - slepc/slepc-2.3.2.tgz, sowing/install.sh, sowing/sowing.tar.gz, - suitesparse/SuiteSparse-3.2.0.tar.gz, - suitesparse/SuiteSparse_install.patch, suitesparse/install.sh, - triangle/install.sh, triangle/makefile, - triangle/triangle.c.patch, triangle/triangle.zip: moved libs to - packages - -2009-04-03 16:21 morlighe - - * contributors.txt: blabla - -2009-04-03 16:10 morlighe - - * src/m/classes/: @pentaelem/CreateKMatrix.mexa64, - @pentaelem/CreatePVector.mexa64, @triaelem/CreateKMatrix.mexa64: - Not needed - -2009-04-03 16:08 morlighe - - * bin/cvs_empty_file: empty file needed - -2009-04-03 16:05 morlighe - - * cron/nightlyrun.sh, doc/issmdoc.m, etc/Make_default_rules.mk, - etc/config_linux64.mk, startup.m, bin/startup.m: reorg - -2009-04-03 16:01 morlighe - - * Makefile.issm: gone - -2009-04-03 16:00 morlighe - - * src/m/shared/: GaussPenta.m, GaussQuad.m, GaussSegment.m, - GaussTetra.m, GaussTria.m, Getalpha2.m, Solver.m, hutterenum.m, - macayealenum.m, noneenum.m, pattynenum.m, recover_input.m, - stokesenum.m: reorg - -2009-04-03 15:55 morlighe - - * src/m/: classes/@acceleratedtriaelem/CreateKMatrix.m, - classes/@acceleratedtriaelem/CreatePVector.m, - classes/@acceleratedtriaelem/acceleratedtriaelem.m, - classes/@acceleratedtriaelem/display.m, - classes/@acceleratedtriaelem/subsasgn.m, - classes/@acceleratedtriaelem/subsref.m, - classes/@beamelem/CreateKMatrix.m, - classes/@beamelem/CreatePVector.m, - classes/@beamelem/GetJacobian.m, - classes/@beamelem/GetJacobianDeterminant.m, - classes/@beamelem/GetJacobianInvert.m, - classes/@beamelem/GetNodalFunctions.m, - classes/@beamelem/GetNodalFunctionsDerivativesBasic.m, - classes/@beamelem/GetNodalFunctionsDerivativesParams.m, - classes/@beamelem/GetParameterValue.m, - classes/@beamelem/beamelem.m, classes/@beamelem/display.m, - classes/@beamelem/getgriddata.m, classes/@beamelem/subsasgn.m, - classes/@beamelem/subsref.m, - classes/@continuous_design/continuous_design.m, - classes/@continuous_design/display.m, - classes/@continuous_state/continuous_state.m, - classes/@continuous_state/display.m, - classes/@elemmatrix/AddElemMatrix.m, - classes/@elemmatrix/display.m, classes/@elemmatrix/elemmatrix.m, - classes/@elemmatrix/subsasgn.m, classes/@elemmatrix/subsref.m, - classes/@elemvector/AddElemVector.m, - classes/@elemvector/display.m, classes/@elemvector/elemvector.m, - classes/@elemvector/subsasgn.m, classes/@elemvector/subsref.m, - classes/@globalmatrix/AddElemMatrix.m, - classes/@globalmatrix/display.m, - classes/@globalmatrix/globalmatrix.m, - classes/@globalmatrix/subsasgn.m, - classes/@globalmatrix/subsref.m, - classes/@globalvector/AddElemVector.m, - classes/@globalvector/display.m, - classes/@globalvector/globalvector.m, - classes/@globalvector/subsasgn.m, - classes/@globalvector/subsref.m, - classes/@icefront/CreatePVector.m, - classes/@icefront/PenaltyConstrain.m, - classes/@icefront/PenaltyCreateKMatrix.m, - classes/@icefront/PenaltyCreatePVector.m, - classes/@icefront/display.m, classes/@icefront/icefront.m, - classes/@icefront/subsasgn.m, classes/@icefront/subsref.m, - classes/@least_squares_term/display.m, - classes/@least_squares_term/least_squares_term.m, - classes/@matice/GetViscosity2.m, - classes/@matice/GetViscosity2d.m, - classes/@matice/GetViscosity3d.m, classes/@matice/display.m, - classes/@matice/matice.m, classes/@matice/subsasgn.m, - classes/@matice/subsref.m, classes/@matpar/display.m, - classes/@matpar/matpar.m, classes/@matpar/subsasgn.m, - classes/@matpar/subsref.m, classes/@model/activaterepository.m, - classes/@model/deletemodel.m, classes/@model/display.m, - classes/@model/fieldcount.m, classes/@model/get.m, - classes/@model/model.m, classes/@model/set.m, - classes/@model/structtomodel.m, classes/@model/subsasgn.m, - classes/@model/subsref.m, classes/@node/display.m, - classes/@node/node.m, classes/@node/subsasgn.m, - classes/@node/subsref.m, - classes/@nonlinear_equality_constraint/display.m, - classes/@nonlinear_equality_constraint/nonlinear_equality_constraint.m, - classes/@nonlinear_inequality_constraint/display.m, - classes/@nonlinear_inequality_constraint/nonlinear_inequality_constraint.m, - classes/@normal_uncertain/display.m, - classes/@normal_uncertain/normal_uncertain.m, - classes/@objective_function/display.m, - classes/@objective_function/objective_function.m, - classes/@pengrid/CreatePVector.m, - classes/@pengrid/PenaltyConstrain.m, - classes/@pengrid/PenaltyCreateKMatrix.m, - classes/@pengrid/PenaltyCreatePVector.m, - classes/@pengrid/display.m, classes/@pengrid/pengrid.m, - classes/@pengrid/subsasgn.m, classes/@pengrid/subsref.m, - classes/@penpair/CreatePVector.m, - classes/@penpair/PenaltyConstrain.m, - classes/@penpair/PenaltyCreateKMatrix.m, - classes/@penpair/PenaltyCreatePVector.m, - classes/@penpair/display.m, classes/@penpair/penpair.m, - classes/@penpair/subsasgn.m, classes/@penpair/subsref.m, - classes/@pentaelem/CreateKMatrix.m, - classes/@pentaelem/CreateKMatrix.mexa64, - classes/@pentaelem/CreatePVector.m, - classes/@pentaelem/CreatePVector.mexa64, - classes/@pentaelem/DeviatoricStress.m, - classes/@pentaelem/GetBStokes.m, classes/@pentaelem/GetB_advec.m, - classes/@pentaelem/GetB_conduct.m, - classes/@pentaelem/GetB_horiz.m, classes/@pentaelem/GetB_vert.m, - classes/@pentaelem/GetBprimeStokes.m, - classes/@pentaelem/GetBprime_advec.m, - classes/@pentaelem/GetBprime_horiz.m, - classes/@pentaelem/GetBprime_vert.m, - classes/@pentaelem/GetJacobian.m, - classes/@pentaelem/GetJacobianDeterminant.m, - classes/@pentaelem/GetJacobianInvert.m, - classes/@pentaelem/GetNodalFunctions.m, - classes/@pentaelem/GetNodalFunctionsBubbleStokes.m, - classes/@pentaelem/GetNodalFunctionsDerivativesBasic.m, - classes/@pentaelem/GetNodalFunctionsDerivativesBasicStokes.m, - classes/@pentaelem/GetNodalFunctionsDerivativesParams.m, - classes/@pentaelem/GetNodalFunctionsDerivativesParamsStokes.m, - classes/@pentaelem/GetNodalFunctionsStokes.m, - classes/@pentaelem/GetParameterDerivativeValue.m, - classes/@pentaelem/GetParameterValue.m, - classes/@pentaelem/GetParameterValueStokes.m, - classes/@pentaelem/GetStrainRate.m, - classes/@pentaelem/GetStrainRateStokes.m, - classes/@pentaelem/PentaCollapseIntoTriaMatrix.m, - classes/@pentaelem/PentaCollapseIntoTriaVector.m, - classes/@pentaelem/ReduceMatrixStokes.m, - classes/@pentaelem/ReduceVectorStokes.m, - classes/@pentaelem/StrainRate.m, classes/@pentaelem/Stress.m, - classes/@pentaelem/StressBed.m, - classes/@pentaelem/StressSurface.m, - classes/@pentaelem/ViscousHeating.m, - classes/@pentaelem/display.m, classes/@pentaelem/getgriddata.m, - classes/@pentaelem/pentaelem.m, classes/@pentaelem/subsasgn.m, - classes/@pentaelem/subsref.m, - classes/@response_function/display.m, - classes/@response_function/response_function.m, - classes/@rgb/display.m, classes/@rgb/rgb.m, - classes/@rgb/subsasgn.m, classes/@rgb/subsref.m, - classes/@singelem/CreateKMatrix.m, - classes/@singelem/CreatePVector.m, classes/@singelem/display.m, - classes/@singelem/singelem.m, classes/@singelem/subsasgn.m, - classes/@singelem/subsref.m, classes/@spc/display.m, - classes/@spc/spc.m, classes/@spc/subsasgn.m, - classes/@spc/subsref.m, classes/@tetraelem/GetJacobian.m, - classes/@tetraelem/GetJacobianDeterminant.m, - classes/@triaelem/CreateKMatrix.m, - classes/@triaelem/CreateKMatrix.mexa64, - classes/@triaelem/CreatePVector.m, - classes/@triaelem/DeviatoricStress.m, classes/@triaelem/GetB.m, - classes/@triaelem/GetB_prog.m, classes/@triaelem/GetBprime.m, - classes/@triaelem/GetBprime_prog.m, - classes/@triaelem/GetJacobian.m, - classes/@triaelem/GetJacobianDeterminant.m, - classes/@triaelem/GetJacobianInvert.m, classes/@triaelem/GetL.m, - classes/@triaelem/GetLStokes.m, - classes/@triaelem/GetLprimeStokes.m, - classes/@triaelem/GetNodalFunctions.m, - classes/@triaelem/GetNodalFunctionsDerivativesBasic.m, - classes/@triaelem/GetNodalFunctionsDerivativesParams.m, - classes/@triaelem/GetParameterDerivativeValue.m, - classes/@triaelem/GetParameterValue.m, - classes/@triaelem/GetStrainRate.m, - classes/@triaelem/StrainRate.m, classes/@triaelem/Stress.m, - classes/@triaelem/ViscousHeating.m, classes/@triaelem/display.m, - classes/@triaelem/getgriddata.m, classes/@triaelem/subsasgn.m, - classes/@triaelem/subsref.m, classes/@triaelem/triaelem.m, - classes/public/BuildQueueingScript.m, - classes/public/BuildQueueingScriptGeneric.m, - classes/public/BuildQueueingScriptcosmos.m, - classes/public/BuildQueueingScriptgemini.m, - classes/public/DepthAverage.m, classes/public/LaunchQueueJob.m, - classes/public/LaunchQueueJobGeneric.m, - classes/public/LaunchQueueJobcosmos.m, - classes/public/LaunchQueueJobgemini.m, - classes/public/QueueJobPeek.m, - classes/public/QueueJobPeekGeneric.m, classes/public/README, - classes/public/ReadData.m, classes/public/SectionValues.m, - classes/public/ThicknessCorrection.m, classes/public/WriteData.m, - classes/public/addnote.m, classes/public/area.m, - classes/public/averageconnectivity.m, classes/public/averaging.m, - classes/public/balvel.m, classes/public/basalstress.m, - classes/public/basevert.m, classes/public/buildoverlay.m, - classes/public/buildoverlaycolorbar.m, classes/public/collapse.m, - classes/public/deepcopy.m, classes/public/displaybc.m, - classes/public/displaycontrol.m, classes/public/displayexppar.m, - classes/public/displaymaterials.m, classes/public/displaymesh.m, - classes/public/displayobservations.m, - classes/public/displayparallel.m, - classes/public/displayparameters.m, classes/public/displayqmu.m, - classes/public/displayresults.m, - classes/public/displaysolutionparameters.m, - classes/public/domaintomesh.m, classes/public/drivingstress.m, - classes/public/export.m, classes/public/extrude.m, - classes/public/fieldcount.m, classes/public/geography.m, - classes/public/ismodelselfconsistent.m, - classes/public/isresultconsistent.m, - classes/public/loadresultsfromcluster.m, - classes/public/loadresultsfromdisk.m, classes/public/marshall.m, - classes/public/mesh.m, classes/public/mesh2.m, - classes/public/meshadaptation.m, classes/public/meshexprefine.m, - classes/public/meshprocessrifts.m, classes/public/meshrefine.m, - classes/public/model2ocmodel.m, classes/public/modelextract.m, - classes/public/modelzoom.m, classes/public/parameterize.m, - classes/public/parseresultsfromdisk.m, classes/public/peek.m, - classes/public/plug.m, classes/public/preparerun.m, - classes/public/printmodel.m, classes/public/project2d.m, - classes/public/project3d.m, classes/public/radarpower.m, - classes/public/recover_areas.m, classes/public/removeholes.m, - classes/public/rifttipsrefine.m, - classes/public/setelementstype.m, classes/public/shear2d.m, - classes/public/shearnorm2d.m, classes/public/slope.m, - classes/public/solve.m, classes/public/solveparallel.m, - classes/public/solversettoasm.m, - classes/public/solversettomumps.m, - classes/public/solversettosor.m, classes/public/structtomodel.m, - classes/public/thicknessevolution.m, classes/public/todo, - classes/public/waitonlock.m, classes/public/plot/applyoptions.m, - classes/public/plot/imagescnan.m, - classes/public/plot/latlonoverlay.m, - classes/public/plot/northarrow.m, - classes/public/plot/parse_options.m, - classes/public/plot/plot_basaldrag.m, - classes/public/plot/plot_boundaries.m, - classes/public/plot/plot_contour.m, - classes/public/plot/plot_drivingstress.m, - classes/public/plot/plot_elementnumbering.m, - classes/public/plot/plot_elementstype.m, - classes/public/plot/plot_gridnumbering.m, - classes/public/plot/plot_highlightelements.m, - classes/public/plot/plot_highlightgrids.m, - classes/public/plot/plot_importancefactors.m, - classes/public/plot/plot_mesh.m, - classes/public/plot/plot_overlay.m, - classes/public/plot/plot_penalties.m, - classes/public/plot/plot_quiver.m, - classes/public/plot/plot_quiver3.m, - classes/public/plot/plot_quivervel.m, - classes/public/plot/plot_riftpenetration.m, - classes/public/plot/plot_riftrelvel.m, - classes/public/plot/plot_riftvel.m, - classes/public/plot/plot_sarpwr.m, - classes/public/plot/plot_section.m, - classes/public/plot/plot_segmentnumbering.m, - classes/public/plot/plot_segmentonneumann.m, - classes/public/plot/plot_tensor.m, - classes/public/plot/plot_tensor_components.m, - classes/public/plot/plot_tensor_principal.m, - classes/public/plot/plot_tensor_principalaxis.m, - classes/public/plot/plot_thermaltransient_results.m, - classes/public/plot/plot_transient_movie.m, - classes/public/plot/plot_transient_results.m, - classes/public/plot/plot_unit.m, - classes/public/plot/plotanalyse.m, classes/public/plot/plotdoc.m, - classes/public/plot/plotmodel.m, - classes/public/plot/processdata.m, - classes/public/plot/processmesh.m, - classes/public/plot/recover_plot_options.m, - classes/public/plot/scaleruler.m, classes/public/plot/undoplot.m, - solutions/ice/BuildGridSets.m, solutions/ice/CreateFemModel.m, - solutions/ice/DeviatoricStressCompute.m, - solutions/ice/DiagnosticSolutionType.m, solutions/ice/Dof.m, - solutions/ice/GetNumberOfActiveElements.m, - solutions/ice/HorizontalVelocityDepthAverage.m, - solutions/ice/IceNormalizeconstraints.m, - solutions/ice/IcePenaltyConstraints.m, - solutions/ice/IceReducematrix.m, - solutions/ice/IceReducematrixfromgtof.m, - solutions/ice/IceReducerightside.m, solutions/ice/Loadresults.m, - solutions/ice/Mergesolution_g.m, solutions/ice/ModelProcessor.m, - solutions/ice/ModelProcessorDiagnosticBaseVert.m, - solutions/ice/ModelProcessorDiagnosticHoriz.m, - solutions/ice/ModelProcessorDiagnosticHutter.m, - solutions/ice/ModelProcessorDiagnosticStokes.m, - solutions/ice/ModelProcessorDiagnosticVert.m, - solutions/ice/ModelProcessorMelting.m, - solutions/ice/ModelProcessorPrognostic.m, - solutions/ice/ModelProcessorSlopeCompute.m, - solutions/ice/ModelProcessorThermal.m, solutions/ice/MpcGrids.m, - solutions/ice/PartitioningVector.m, - solutions/ice/PenaltySystemMatrices.m, - solutions/ice/PressureElemCompute.m, - solutions/ice/Reducevector_g.m, - solutions/ice/SetStructureField.m, solutions/ice/SetupParams.m, - solutions/ice/ShiftLayers.m, solutions/ice/SpcGrids.m, - solutions/ice/StrainRateCompute.m, - solutions/ice/StressBedCompute.m, solutions/ice/StressCompute.m, - solutions/ice/StressSurfaceCompute.m, - solutions/ice/SystemMatrices.m, solutions/ice/TimeStepping.m, - solutions/ice/UpdateGeometry.m, - solutions/ice/UpdateGridPosition.m, solutions/ice/UpdateMesh.m, - solutions/ice/VelocityExtrude.m, - solutions/ice/ViscousHeatingCompute.m, solutions/ice/debug.m, - solutions/ice/debug2.m, solutions/ice/getdofcount.m, - solutions/ice/huttercompute.m, solutions/ice/icediagnostic.m, - solutions/ice/icediagnostic2d.m, solutions/ice/icediagnostic3d.m, - solutions/ice/icediagnostic_core_linear.m, - solutions/ice/icediagnostic_core_nonlinear.m, - solutions/ice/icediagnostic_wrapper.m, solutions/ice/iceglobal.m, - solutions/ice/icemelting_core.m, solutions/ice/iceparameters.m, - solutions/ice/iceparameters_wrapper.m, - solutions/ice/iceprognostic.m, - solutions/ice/iceprognostic_core.m, - solutions/ice/iceprognostic_wrapper.m, - solutions/ice/icethermal.m, solutions/ice/icethermal_core.m, - solutions/ice/icethermal_wrapper.m, solutions/ice/icetransient.m, - solutions/ice/icetransient2d.m, solutions/ice/icetransient3d.m, - solutions/ice/icetransient_wrapper.m, - solutions/ice/slopecompute.m, solutions/macayeal/bar_maker.m, - solutions/macayeal/buildicefrontnormal.m, - solutions/macayeal/c_velfinder.m, - solutions/macayeal/create_el2nod_matrices.m, - solutions/macayeal/flowlaw.m, solutions/macayeal/grad_J_flow.m, - solutions/macayeal/macayealcontrol.m, - solutions/macayeal/macayealdiagnostic.m, - solutions/macayeal/objectivefunction_C_flow.m, - solutions/macayeal/setup_control.m, solutions/macayeal/shape.m, - solutions/macayeal/shear.m, solutions/macayeal/stress.m, - solutions/macayeal/visc_grad.m, solutions/macayeal/viscosity.m, - utils/genpath_ice.m, utils/Antarctica/README, - utils/Antarctica/antcreatewrappedmap.m, - utils/Antarctica/antimread.m, - utils/Antarctica/antlatlonoverlay.m, utils/Antarctica/antmovie.m, - utils/Antarctica/antoutline.m, utils/Antarctica/antoverlay.m, - utils/Antarctica/antoverlay2.m, utils/Antarctica/antscale.m, - utils/Antarctica/antzoom.m, utils/Array/allempty.m, - utils/Array/allnan.m, utils/Array/string_dim.m, - utils/Array/string_vec.m, utils/Cluster/clusterreq.m, - utils/Computation/runtime.m, - utils/Computation/sparsity_compute.m, - utils/Cracks/contour_icefront.m, utils/Cracks/contour_maker.m, - utils/Cracks/exist_by_names.m, utils/Cracks/find_around.m, - utils/Cracks/find_coord.m, utils/Cracks/find_coord_matrix.m, - utils/Cracks/find_line.m, utils/Cracks/icefront_maker.m, - utils/Cracks/index_builder.m, utils/Cracks/index_builder2.m, - utils/Cracks/locate.m, utils/Cracks/margin_locator.m, - utils/Cracks/mesh_creator_2d.m, utils/Cracks/meshdensitygen.m, - utils/Cracks/names_function.m, utils/Cracks/perim_curve.m, - utils/Cracks/void_fill.m, utils/Cracks/void_fill1d.m, - utils/Cracks/void_fill_noxy.m, utils/DataProcessing/addtrack.m, - utils/DataProcessing/data_processing_tool.fig, - utils/DataProcessing/data_processing_tool.m, utils/Err/erfn.m, - utils/Err/erfp.m, utils/Exp/expboxgen.m, - utils/Exp/expconcatenate.m, utils/Exp/expcreatecircle.m, - utils/Exp/expcreatecontour.m, utils/Exp/expcreateprofile.m, - utils/Exp/expcut.m, utils/Exp/expdisp.m, utils/Exp/expdoc.m, - utils/Exp/expgen.m, utils/Exp/explink.m, utils/Exp/expmaster.m, - utils/Exp/expselect.m, utils/Exp/ginputquick.m, - utils/Exp/zinput.m, utils/Exp/manipulation/addendprofile.m, - utils/Exp/manipulation/addinsideprofile.m, - utils/Exp/manipulation/addprofile.m, - utils/Exp/manipulation/closeprofile.m, - utils/Exp/manipulation/closestpoint.m, - utils/Exp/manipulation/closestsegment.m, - utils/Exp/manipulation/cutarea.m, - utils/Exp/manipulation/cutprofile.m, - utils/Exp/manipulation/mergeprofiles.m, - utils/Exp/manipulation/modifyposition.m, - utils/Exp/manipulation/removepoints.m, - utils/Exp/manipulation/removeprofile.m, - utils/Exp/manipulation/removeseveralpoints.m, - utils/Exp/manipulation/undoplots.m, - utils/Exp/readwrite/expread.m, utils/Exp/readwrite/expwrite.m, - utils/Exp/readwrite/expwriteasvertices.m, - utils/Exp/readwrite/newline.m, utils/Exp/readwrite/put_file.m, - utils/Exp/readwrite/read_file.m, utils/Exp/readwrite/readfile.m, - utils/Exp/readwrite/readline.m, utils/Exp/readwrite/writefile.m, - utils/Find/locate.m, utils/Geometry/SegIntersect.m, - utils/Geometry/find_point.m, utils/Hulls/inhull.m, - utils/Hulls/insidehull.m, utils/Hulls/interval.m, - utils/Hulls/intsecl.m, utils/Hulls/intsecpl.m, - utils/Hulls/iscross.m, utils/Hulls/isinpoly.m, - utils/Hulls/isinpolylarge.m, utils/Hulls/ispolygon.m, - utils/Hulls/linechk.m, utils/ImageProcessing/gradient_perso.m, - utils/ImageProcessing/im_resize.m, - utils/ImageProcessing/mean_congrid.m, - utils/ImageProcessing/rebin.m, - utils/Interp/griddata_grid_to_mesh.m, - utils/Interp/griddata_grid_to_mesh_completer.m, - utils/Interp/griddata_grid_to_mesh_nan.m, - utils/Interp/griddata_mesh_to_grid.m, - utils/Interp/griddata_mesh_to_mesh.m, - utils/Interp/griddata_mesh_to_mesh_3d.m, - utils/Interp/griddata_nearest.m, - utils/Interp/griddata_nearest_matrix.m, - utils/Interp/griddata_nearest_nan.m, - utils/Interp/griddata_nearest_vector.m, - utils/Interp/griddata_perso.m, utils/LatLong/ll2xy.m, - utils/LatLong/mapll.m, utils/LatLong/mapxy.m, - utils/LatLong/xyscale_south.m, utils/Math/fixdec.m, - utils/Meca/effective_value.m, utils/Meca/glen_coefficients.m, - utils/Meca/lithostaticpressure.m, utils/Meca/paterson.m, - utils/Meca/tau_principal.m, utils/Mesh/BuildAdaptedMesh.m, - utils/Miscellaneous/create_region.m, - utils/Miscellaneous/findarg.m, utils/Miscellaneous/round_ice.m, - utils/Model/ProcessParallelParametersFromCieloRc.m, - utils/Model/loadmodel.m, utils/Nightly/nightlyrun.m, - utils/Nightly/nightlyruncielo.m, utils/Plot/squarezoom.m, - utils/Shell/issmdir.m, utils/Sound/beep_ice.m, - utils/String/discardnum.m, utils/String/logoutput.m, - utils/String/strsplit.m, utils/UpdateArchive/updatearchive.m, - utils/Visu/plot_results.m, utils/Visu/twofig.m, utils/Visu/vi.m, - utils/Visu/vic.m, utils/Visu/vii.m, utils/Visu/vim.m, - utils/Visu/vim3.m: reorg - -2009-04-03 15:43 morlighe - - * src/: c/MakefileIce, perl/DiagnosticAlter.pl: reorg - -2009-04-03 15:42 morlighe - - * src/c/shared/: MakefileIce, Exp/IsInPoly.c, Ice/Contour.c, - Ice/Contour.h, Ice/CreateElemMatrix.c, Ice/CreateElemVector.c, - Ice/GaussPenta.c, Ice/GaussSegment.c, Ice/GaussTria.c, - Ice/GetBFromTemperature.c, Ice/GetParameterList.c, - Ice/Getalpha2FromFrictionParameters.c, Ice/Ice.h, - Ice/MatrixUtils.c, Ice/SetDofs.c, Ice/SharedPentaElem.c, - Ice/SharedTriaElem.c, Ice/getgriddata.c, Ice/recover_input.c: Big - reorg - -2009-04-03 15:39 morlighe - - * src/mex/MakefileIce: big reorg - -2009-04-03 15:37 morlighe - - * src/mex/: ArgusContourToMesh/ArgusContourToMesh.m, - ArgusContourToMesh/Makefile, DataInterp/DataInterp.m, - DataInterp/Makefile, HoleFiller/Makefile, MeshPartition/Makefile, - SetStructureField/Makefile, - SetStructureField/SetStructureField.c, - SetStructureField/SetStructureField.h, TriMesh/Makefile, - TriMeshProcessRifts/Makefile, TriMeshRefine/Makefile, - Visu/Makefile, pentaelem/CreateKMatrix.c, - pentaelem/CreateKMatrix.h, pentaelem/CreatePVector.c, - pentaelem/CreatePVector.h, pentaelem/Makefile, - triaelem/CreateKMatrix.c, triaelem/CreateKMatrix.h, - triaelem/Makefile: Big Reorg - -2009-04-03 15:29 morlighe - - * src/c/shared/sharedice.h: Missing file - -2009-03-18 12:06 larour - - * MakefileIce: diverse. - -2009-03-18 12:05 larour - - * MakefileIce: Moved Makefile to MakefileIce - -2009-03-18 12:04 larour - - * src/MakefileIce: Missing links - -2009-03-18 12:02 larour - - * src/c/: MakefileIce, ArgusContourToMeshx/ArgusContourToMesh.h, - ArgusContourToMeshx/ArgusContourToMeshx.c, - ArgusContourToMeshx/Contour.c, ArgusContourToMeshx/Contour.h, - ArgusContourToMeshx/Makefile, HoleFillerx/HoleFiller.h, - HoleFillerx/HoleFillerCrippen.c, HoleFillerx/HoleFillerx.c, - HoleFillerx/Makefile, IceDataInterpx/DataInterp.h, - IceDataInterpx/DataInterpx.c, IceDataInterpx/Makefile, - MeshPartitionx/Makefile, MeshPartitionx/MeshPartition.h, - MeshPartitionx/MeshPartitionx.c, Visux/Makefile, Visux/Visu.h, - Visux/Visux.c, shared/MakefileIce, shared/Exp/ExpIce.h, - shared/TriMesh/TriMesh.h: x code taken out of modules - -2009-03-18 11:57 larour - - * src/mex/: DataInterp/DataInterp.c, DataInterp/DataInterp.h, - DataInterp/DataInterpx.c, DataInterp/Makefile, - HoleFiller/HoleFiller.c, MeshPartition/MeshPartition.c: Wrong - header files - -2009-03-18 11:53 larour - - * src/mex/: ArgusContourToMesh/ArgusContourToMesh.c, - ArgusContourToMesh/ArgusContourToMesh.h, - ArgusContourToMesh/ArgusContourToMeshx.c, - ArgusContourToMesh/Contour.c, ArgusContourToMesh/Contour.h, - ArgusContourToMesh/IsInPoly.c, ArgusContourToMesh/Makefile, - HoleFiller/HoleFiller.h, HoleFiller/HoleFillerCrippen.c, - HoleFiller/HoleFillerx.c, HoleFiller/Makefile, - MeshPartition/Makefile, MeshPartition/MeshPartition.h, - MeshPartition/MeshPartitionx.c, TriMesh/TriMesh.c, - TriMeshProcessRifts/TriMeshProcessRifts.c, - TriMeshRefine/TriMeshRefine.c, Visu/Makefile, Visu/Visu.c, - Visu/Visu.h, Visu/Visux.c: Took out x code layer - -2009-03-18 11:06 larour - - * etc/config_linux64.mk: [no log message] - -2009-03-18 11:05 larour - - * etc/config_linux64.mk: Replaced ICE by ISSM_DIR - -2009-03-18 10:56 larour - - * src/c/shared/TriMesh/GridInsideHole.c: minor. - -2009-03-18 10:38 morlighe - - * scripts/archive.sh: fixed archive.sh - -2009-03-18 10:37 larour - - * src/MakefileIce: Moved Makefile.issm to MakefileIce - -2009-03-18 10:36 larour - - * src/mex/: Makefile, MakefileIce: Moved Makefile to MakefileIce - -2009-03-18 10:35 larour - - * src/mex/: TriMesh/Makefile, TriMesh/TriMesh.c, - TriMeshProcessRifts/Makefile, - TriMeshProcessRifts/TriMeshProcessRifts.c, - TriMeshRefine/Makefile, TriMeshRefine/TriMeshRefine.c: Now - references sharedice.a library. - -2009-03-18 10:32 larour - - * src/c/shared/: MakefileIce, Exp/DomainOutlineReadIce.c, - Exp/ExpIce.h, TriMesh/AssociateSegmentToElement.c, - TriMesh/GridInsideHole.c, TriMesh/Makefile, - TriMesh/OrderSegments.c, TriMesh/SplitMeshForRifts.c, - TriMesh/TriMesh.h, TriMesh/TriMeshUtils.c: Shared is not in - shared/ - -2009-03-18 10:32 morlighe - - * archive.sh: moved to scripts - -2009-03-18 08:31 larour - - * install.sh: Gone baby gone... Niac niac. - -2009-03-18 08:25 larour - - * mailinglist, cron/mailinglist: Gone to cron - -2009-03-18 08:23 larour - - * todo: Gone to Trash - -2009-03-18 08:23 larour - - * startup.m, bin/startup.m: Moved to bin - -2009-03-18 08:09 larour - - * startup.m: issmdir could not be found! (thanks Mathieu!) - -2009-03-18 08:03 larour - - * scripts/archive.sh: Moved from root directory - -2009-03-18 07:50 larour - - * cron/linux_cronfile: Updated Cron to cron - -2009-03-18 07:41 larour - - * etc/environment_variables: Replaced Libs by libs. - -2009-03-18 07:21 larour - - * src/pro/: bytscl.m, plot_cielo.pro: From Utils to pro/ for Idl - utils - -2009-03-18 07:14 larour - - * src/mex/: Makefile, ArgusContourToMesh/ArgusContourToMesh.c, - ArgusContourToMesh/ArgusContourToMesh.h, - ArgusContourToMesh/ArgusContourToMesh.m, - ArgusContourToMesh/ArgusContourToMeshx.c, - ArgusContourToMesh/Contour.c, ArgusContourToMesh/Contour.h, - ArgusContourToMesh/IsInPoly.c, ArgusContourToMesh/Makefile, - DataInterp/DataInterp.c, DataInterp/DataInterp.h, - DataInterp/DataInterp.m, DataInterp/DataInterpx.c, - DataInterp/Makefile, HoleFiller/HoleFiller.c, - HoleFiller/HoleFiller.h, HoleFiller/HoleFillerCrippen.c, - HoleFiller/HoleFillerx.c, HoleFiller/Makefile, - MeshPartition/Makefile, MeshPartition/MeshPartition.c, - MeshPartition/MeshPartition.h, MeshPartition/MeshPartitionx.c, - TriMesh/Makefile, TriMesh/TriMesh.c, - TriMeshProcessRifts/Makefile, - TriMeshProcessRifts/TriMeshProcessRifts.c, - TriMeshRefine/Makefile, TriMeshRefine/TriMeshRefine.c, - Visu/Makefile, Visu/Visu.c, Visu/Visu.h, Visu/Visux.c: - Modifications to run in new directory - -2009-03-18 06:57 larour - - * etc/: config_linux32.mk, config_linux64.mk, config_mac.mk, - mexopts_v5.sh, mexopts_v76.sh: New path etc/ to mex options file. - -2009-03-18 06:52 larour - - * etc/environment.sh: New path to config. - -2009-03-18 06:45 larour - - * doc/: Makefile, developperguide.pdf, theoryguide.pdf, - userguide.pdf, theoryguide/Algorithm.png, - theoryguide/Assembly.png, theoryguide/MINI.png, - theoryguide/Makefile, theoryguide/TpmpMb.png, - theoryguide/accumulation.png, theoryguide/barycentric_penta.png, - theoryguide/barycentric_tria.png, theoryguide/bilanmass.png, - theoryguide/friction_geometry.png, theoryguide/friction_kin.png, - theoryguide/geometry3D.png, theoryguide/melting.png, - theoryguide/meshpenalty.png, theoryguide/penalized_vel_2.png, - theoryguide/penalized_vel_3.png, theoryguide/penalties1.png, - theoryguide/pentaelem.png, theoryguide/prog1.png, - theoryguide/prog2.png, theoryguide/progi.png, - theoryguide/quadelem.png, theoryguide/schema1.png, - theoryguide/schema4.png, theoryguide/schema5.png, - theoryguide/segment.png, theoryguide/tetraelem.png, - theoryguide/theoryguide.tex, theoryguide/thermal_loop.png, - theoryguide/triaelem.png, userguide/Amery.png, - userguide/Antarctica.png, userguide/Makefile, - userguide/argus.png, userguide/argus_DO.png, - userguide/argus_Front.png, userguide/argus_GL.png, - userguide/argus_Islands.png, userguide/argus_map.png, - userguide/contour.png, userguide/layers.png, - userguide/userguide.tex: Moved Doc to doc - -2009-03-18 06:42 larour - - * cron/: README, ice.sh, killingforeign.sh, linux_cronfile, - nightlyrun.sh, tag.sh, testingforeign.sh: Moved Cron to cron - -2009-03-18 05:46 larour - - * etc/: Make_default_rules.mk, README, cielo.rc, config_linux32.mk, - config_linux64.mk, config_mac.mk, environment.sh, - environment_variables, mexopts_mac.sh, mexopts_v5.sh, - mexopts_v651.sh, mexopts_v704.sh, mexopts_v76.sh: Moved Etc to - etc - -2009-03-17 18:56 larour - - * Makefile, Makefile.issm: Moved Makefile to Makefile.issm to make - room for Cielo makefile. - -2009-03-17 18:04 larour - - * README: Diverse - -2009-03-17 18:02 larour - - * INSTALL, README: some info - -2009-03-17 17:57 larour - - * startup.m: More elegant way to recove ISSM_DIR - -2009-03-17 14:32 larour - - * test/test.m: Gone: ignore - -2009-03-17 14:29 larour - - * test/test.m: test dir: ignore - -2009-03-17 14:28 larour - - * test.m: test: ignore - -2009-03-17 14:23 larour - - * test.m: test: ignore - -2009-03-17 13:59 larour - - * startup.m: SUITESPARSE moved to Libs/suitesparse - -2009-03-17 13:58 larour - - * Makefile: Took out doxygen doc, now in Doc/developperguide/ - makefile. - -2009-03-17 13:56 larour - - * doxygen.config: c html doc using doxygen, and matlab html doc - using m2html - -2009-03-17 12:08 morlighe - - * install.sh: metis is needed by MeshPartition module - -2009-03-17 11:55 morlighe - - * install.sh: Added compilation of triangle - -2009-03-17 11:48 morlighe - - * install.sh: Added an install.sh file to check that .bashrc is - correclty configured and automated compilation - -2009-03-17 08:13 larour - - * README: How to get ISSM to work - -2009-03-17 08:12 larour - - * startup.m: Simpler startup file. - -2009-03-17 08:10 larour - - * install.sh: Not needed anymore - -2009-03-17 07:41 larour - - * Makefile: New modules framework - -2009-03-17 07:41 larour - - * archive.sh: Naming - -2009-03-13 16:39 larour - - * doxygen.config: Automatic documentation generation. - -2009-03-13 11:09 morlighe - - * contributors.txt: added IsInpoly.c contrib - -2009-03-13 09:48 morlighe - - * contributors.txt: not used anymore - -2009-03-11 17:06 morlighe - - * contributors.txt: updated contributors - -2009-03-05 12:22 morlighe - - * install.sh: change startup file first - -2009-03-02 16:40 morlighe - - * startup.m: simplified startup.m with genpath_ice - -2009-03-02 09:43 larour - - * startup.m: Added dakota directories. - -2009-02-28 21:55 larour - - * startup.m: Added responsefunctions - -2009-02-24 10:07 morlighe - - * install.sh: Added get number of CPUs and removes make -j 8 for - the first make (compilation fails) - -2009-02-23 15:49 larour - - * startup.m: Added Gdal path. - -2009-02-23 15:49 larour - - * Makefile, install.sh: Include Gdal compilation. - -2009-02-17 13:53 morlighe - - * startup.m: minor - -2009-02-17 13:52 morlighe - - * todo: [no log message] - -2009-02-17 13:52 morlighe - - * startup.m: Added missing directories in path - -2009-02-17 13:51 morlighe - - * Makefile: Added HoleFiller, and Public target - -2009-02-17 12:51 larour - - * todo: [no log message] - -2009-02-17 12:50 larour - - * startup.m: Added missing directories in path - -2009-02-17 12:49 larour - - * Makefile: Added HoleFiller, and Public target - -2009-02-11 10:52 morlighe - - * todo: test - -2009-02-10 15:32 larour - - * todo: Test4 - -2009-02-10 15:31 larour - - * todo: Test 3 - -2009-02-10 15:21 larour - - * todo: test - -2009-02-09 10:08 morlighe - - * contributors.txt: minor - -2009-02-06 12:11 morlighe - - * startup.m: Added HoleFiller Path - -2009-02-06 09:28 morlighe - - * install.sh: Added a script to install everything automatically - -2009-02-05 17:41 morlighe - - * todo: as usual - -2009-02-05 17:12 morlighe - - * startup.m: bad startup - -2009-02-05 16:50 larour - - * contributors.txt, startup.m, todo: Cleanup solutions - -2009-02-03 07:51 morlighe - - * startup.m: plot must be added to startup file - -2009-02-02 08:15 larour - - * todo: Mathieu? - -2009-01-27 09:30 larour - - * contributors.txt: Added contributors list - -2009-01-27 09:28 larour - - * Makefile: Added HoleFiller module - -2009-01-20 14:53 ala - - * mailinglist: Added Ala's email address. - -2009-01-20 07:25 morlighe - - * startup.m: new path is needed for cielo - -2009-01-20 07:09 larour - - * mailinglist: Test, ignore - -2009-01-19 14:14 larour - - * mailinglist: Test of VCS commit. Ignore. - -2009-01-19 14:14 larour - - * mailinglist: Test of VCS commit. Ignore - -2009-01-19 11:05 larour - - * Makefile: Replaced path to config from MexConfig to Etc - -2008-12-30 08:45 morlighe - - * todo: Added some missing stuff from previous ice1 - -2008-12-29 11:54 larour - - * startup.m, todo: Some missing stuff from ice2 - -2008-12-29 09:23 seroussi - - * startup.m: Not needed - -2008-12-29 09:04 seroussi - - * startup.m: test - -2008-12-29 08:16 morlighe - - * todo: as usual - -2008-12-24 10:39 morlighe - - * startup.m: antepenultimate test - -2008-12-24 10:28 morlighe - - * startup.m: back - -2008-12-24 10:16 morlighe - - * startup.m: check nightly run - -2008-12-24 10:13 seroussi - - * mailinglist: removed change - -2008-12-24 07:40 seroussi - - * mailinglist: to fix nightly runs and avoid 100 mails - -2008-12-22 09:27 morlighe - - * todo: as usual - -2008-12-22 07:36 morlighe - - * todo: as usual - -2008-12-05 11:33 morlighe - - * todo: commit to be done later - -2008-11-18 13:55 morlighe - - * todo: as usual - -2008-10-21 14:14 morlighe - - * todo: as usual - -2008-10-14 09:02 morlighe - - * todo: as usual - -2008-10-13 08:11 morlighe - - * todo: as usual - -2008-10-13 08:03 morlighe - - * todo: as usual - -2008-09-29 13:22 morlighe - - * todo: as usual - -2008-09-26 16:55 larour - - * startup.m: Added model to startup - -2008-09-26 10:16 morlighe - - * todo: as usual - -2008-09-25 16:01 morlighe - - * todo: as usual - -2008-09-25 09:30 seroussi - - * todo: as usual - -2008-09-24 13:07 morlighe - - * todo: as usual - -2008-09-24 10:52 larour - - * todo: Simplified diagnostic solution - -2008-09-16 15:59 morlighe - - * todo: as usual - -2008-09-15 12:30 morlighe - - * todo: as usual - -2008-09-10 17:06 morlighe - - * todo: to do tomorrow - -2008-09-10 16:57 morlighe - - * todo: as usual - -2008-09-09 15:57 morlighe - - * todo: as usual - -2008-09-09 13:31 morlighe - - * todo: ice shelf basal velocity -> fixed - -2008-09-09 11:46 morlighe - - * todo: As usual - -2008-09-09 07:46 morlighe - - * todo: as usual - -2008-09-08 17:35 morlighe - - * todo: Good luck! - -2008-09-08 09:23 seroussi - - * startup.m: minor - -2008-09-08 09:22 seroussi - - * startup.m: simplified projections project3d - -2008-09-08 08:38 morlighe - - * todo: as usual - -2008-09-05 16:31 larour - - * todo: as usual - -2008-09-05 15:53 larour - - * todo: Improved transient and steady state thermal solution - -2008-09-04 14:21 morlighe - - * todo: as usual - -2008-09-04 11:53 morlighe - - * todo: As usual - -2008-09-03 16:56 morlighe - - * todo: As usual - -2008-09-03 12:23 larour - - * todo: Important - -2008-09-03 09:21 morlighe - - * todo: as usual - -2008-09-02 16:38 larour - - * todo: New transient solution - -2008-09-02 13:08 larour - - * todo: New penalty approach to computation of melting in thermal - solution - -2008-09-02 09:20 larour - - * todo: As usual - -2008-08-30 07:12 larour - - * todo: As usual - -2008-08-29 10:19 larour - - * todo: as usual - -2008-08-28 17:05 seroussi - - * todo: updated todo - -2008-08-27 13:36 larour - - * todo: Implemented basal vertical velocity solution. Started - thermal solution - -2008-08-26 17:10 larour - - * todo: as usual - -2008-08-26 14:44 larour - - * todo: Implemented and fixed bugs in vertical solution - -2008-08-26 10:54 larour - - * todo: Implemented new 2d-3d modeling. Extended computations of - velocities vertically - -2008-08-26 10:52 larour - - * startup.m: Better path - -2008-08-25 09:54 larour - - * startup.m: Took out the startup error - -2008-08-24 14:39 larour - - * todo: as usual - -2008-08-21 17:42 larour - - * startup.m: New startup - -2008-08-21 17:38 larour - - * mailinglist: Added mailing list - -2008-08-07 10:39 morlighe - - * startup.m: oups... - -2008-08-07 10:37 morlighe - - * startup.m: Added a new field md.visualization. If 1: - visualization of each iteration results in icecontrol - -2008-08-01 23:36 larour - - * todo: As usual - -2008-08-01 12:09 larour - - * startup.m: Public/ - -2008-07-31 14:08 morlighe - - * startup.m: Same convention for MacAyealdiagnostic and control - (2nu -> nu) - -2008-07-25 17:10 larour - - * todo: As usual - -2008-07-25 11:35 larour - - * Makefile, todo: Added Makefiles to compiled shared and objects in - 'c' code - -2008-07-23 08:28 larour - - * startup.m, todo: Missing MeshPartition path - -2008-07-21 15:11 larour - - * Makefile: Addedd MeshPartition module. - -2008-07-03 22:05 larour - - * todo: As usual - -2008-07-01 11:12 larour - - * todo: Added cronjob capabilities - -2008-06-30 14:50 seroussi - - * todo: Updated todo - -2008-06-30 11:40 larour - - * Makefile: Separated Doc target from all target - -2008-06-26 16:17 larour - - * startup.m: Added DataInterp to path - -2008-06-26 16:10 larour - - * Makefile: Added DataInterp target - -2008-06-17 11:06 larour - - * Makefile: Added top level Makefile to drive overall compilation - -2008-06-12 14:44 larour - - * startup.m: Added ArgusContourToMesh module, to run with - parameterize.m - -2008-06-04 10:11 seroussi - - * todo: Update todo - -2008-06-03 16:40 larour - - * todo: Some more things to do. - -2008-06-03 16:40 larour - - * startup.m: Took out objects from the ICE path, as the @grid class - interferes with the graph2d/grid.m routine. - -2008-06-03 11:54 larour - - * todo: Todo - -2008-06-03 10:43 larour - - * archive.sh: New clean targets. - -2008-06-02 16:24 larour - - * startup.m: Updated paths to solution scripts. - -2008-06-02 16:12 larour - - * startup.m: Modified path to Triangle meshing modules. - -2008-05-30 11:32 larour - - * todo: Additional task on square model. - -2008-05-30 11:18 larour - - * todo: Added cholesky task. - -2008-05-30 10:47 larour - - * todo: Todo file. Update as much as needed. - -2008-05-29 14:26 seroussi - - * startup.m: Comment on lastwarn - -2008-05-29 14:07 morlighe - - * startup.m: fixed problem with startup's warning message - -2008-05-29 12:16 larour - - * startup.m: Updated startup.m file for new changes in names of - solution sequences - -2008-05-29 11:57 larour - - * startup.m: Improved startup file. Added missing Model in the Ice - path. - -2008-05-29 11:54 larour - - * startup.m: Improved startup file - -2008-05-29 11:50 larour - - * startup.m: Improved startup file - -2008-05-29 11:45 larour - - * startup.m: Improved startup file - -2008-05-29 11:42 larour - - * startup.m: Improved startup file - -2008-05-29 10:06 morlighe - - * startup.m: [no log message] - -2008-05-21 11:08 larour - - * archive.sh: New tar creation routine. - -2008-05-21 10:53 larour - - * startup.m: New shuffling of code architecture. - -2008-05-21 10:13 larour - - * startup.m: Cleaned up startup file. - -2008-04-19 12:33 larour - - * startup.m: Working out of tier3 now. - -2008-03-05 13:31 larour - - * startup.m: Too many changes to explain - -2007-12-05 14:48 larour - - * Makefile: Not needed for now. - -2007-12-05 14:45 larour - - * startup.m: Added windows startup to the existing linux startup - matlab script. - -2007-12-05 12:12 larour - - * startup.m: Cleaned up a little bit. Only two paths to setup: for - Cielo, and for Ice codes. - -2007-11-27 12:07 larour - - * startup.m: New TriMesh modules, added path. - -2007-11-21 18:11 larour - - * startup.m: Added MacAyealControlModel to the matlab path. - -2007-11-19 15:25 larour - - * startup.m: Promoted tier3_ice to tier2_ice. - -2007-11-18 16:07 larour - - * startup.m: This file should be symbolically linked to the matlab - starting directory. - -2007-10-25 09:30 larour - - * Makefile: Ice flow modeling - -2007-10-25 09:30 larour - - * Makefile: Initial revision - +https://issm.ess.uci.edu:80/trac/issm/timeline Index: /proj/ice/larour/issm-uci-clean/trunk-jpl/configure.ac =================================================================== --- /proj/ice/larour/issm-uci-clean/trunk-jpl/configure.ac (revision 11025) +++ /proj/ice/larour/issm-uci-clean/trunk-jpl/configure.ac (revision 11026) @@ -1,4 +1,4 @@ -AC_INIT(ISSM,[1.0], [Eric Larour ]) +AC_INIT(ISSM,4.0,issm@jpl.nasa.gov) AM_CONFIG_HEADER(config.h) AC_CANONICAL_TARGET AM_INIT_AUTOMAKE Index: /proj/ice/larour/issm-uci-clean/trunk-jpl/doc/issmdoc.m =================================================================== --- /proj/ice/larour/issm-uci-clean/trunk-jpl/doc/issmdoc.m (revision 11025) +++ /proj/ice/larour/issm-uci-clean/trunk-jpl/doc/issmdoc.m (revision 11026) @@ -3,11 +3,7 @@ %First get ISSM tier: ISSM_TIER=issmtier; -disp(sprintf('\n%s%s%s',' The following documentations are available in ',ISSM_TIER,'/doc/')); -disp(sprintf('%s',' userguide: how to use ISSM, quick tutorial')); -disp(sprintf('%s',' theoryguide: theory behind the ISSM models')); -disp(sprintf('%s',' validation: test results of ISSM')); -disp(sprintf('\n%s',' Website: a comprehensive documentation is available on http://www.issm.jpl.nasa.gov')); +disp(sprintf('\n%s',' A comprehensive documentation is available on http://issm.jpl.nasa.gov')); disp(sprintf('\n%s',' Example: how to create a square ice shelf')); disp(sprintf('%s',' go to ',ISSM_TIER,'/examples/SquareIceshelf')); disp(sprintf('%s',' md=model; %creates a new empty model structure')); Property changes on: /proj/ice/larour/issm-uci-clean/trunk-jpl ___________________________________________________________________ Modified: svn:mergeinfo Merged /issm/trunk:r10981-11025